Linux: >> Linux Kernel >> 5.15.209 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets.
CVSS Score
9.1
EPSS Score
0.003
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
AppArmor: Allow apparmor to handle unaligned dfa tables
The dfa tables can originate from kernel or userspace and 8-byte alignment
isn't always guaranteed and as such may trigger unaligned memory accesses
on various architectures. Resulting in the following
[ 73.901376] WARNING: CPU: 0 PID: 341 at security/apparmor/match.c:316 aa_dfa_unpack+0x6cc/0x720
[ 74.015867] Modules linked in: binfmt_misc evdev flash sg drm drm_panel_orientation_quirks backlight i2c_core configfs nfnetlink autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid sr_mod hid cdrom
sd_mod ata_generic ohci_pci ehci_pci ehci_hcd ohci_hcd pata_ali libata sym53c8xx scsi_transport_spi tg3 scsi_mod usbcore libphy scsi_common mdio_bus usb_common
[ 74.428977] CPU: 0 UID: 0 PID: 341 Comm: apparmor_parser Not tainted 6.18.0-rc6+ #9 NONE
[ 74.536543] Call Trace:
[ 74.568561] [<0000000000434c24>] dump_stack+0x8/0x18
[ 74.633757] [<0000000000476438>] __warn+0xd8/0x100
[ 74.696664] [<00000000004296d4>] warn_slowpath_fmt+0x34/0x74
[ 74.771006] [<00000000008db28c>] aa_dfa_unpack+0x6cc/0x720
[ 74.843062] [<00000000008e643c>] unpack_pdb+0xbc/0x7e0
[ 74.910545] [<00000000008e7740>] unpack_profile+0xbe0/0x1300
[ 74.984888] [<00000000008e82e0>] aa_unpack+0xe0/0x6a0
[ 75.051226] [<00000000008e3ec4>] aa_replace_profiles+0x64/0x1160
[ 75.130144] [<00000000008d4d90>] policy_update+0xf0/0x280
[ 75.201057] [<00000000008d4fc8>] profile_replace+0xa8/0x100
[ 75.274258] [<0000000000766bd0>] vfs_write+0x90/0x420
[ 75.340594] [<00000000007670cc>] ksys_write+0x4c/0xe0
[ 75.406932] [<0000000000767174>] sys_write+0x14/0x40
[ 75.472126] [<0000000000406174>] linux_sparc_syscall+0x34/0x44
[ 75.548802] ---[ end trace 0000000000000000 ]---
[ 75.609503] dfa blob stream 0xfff0000008926b96 not aligned.
[ 75.682695] Kernel unaligned access at TPC[8db2a8] aa_dfa_unpack+0x6e8/0x720
Work around it by using the get_unaligned_xx() helpers.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix locking in regulator_resolve_supply() error path
If late enabling of a supply regulator fails in
regulator_resolve_supply(), the code currently triggers a lockdep
warning:
WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596
...
Call trace:
_regulator_put+0x80/0xa0 (P)
regulator_resolve_supply+0x7cc/0xbe0
regulator_register_resolve_supply+0x28/0xb8
as the regulator_list_mutex must be held when calling _regulator_put().
To solve this, simply switch to using regulator_put().
While at it, we should also make sure that no concurrent access happens
to our rdev while we clear out the supply pointer. Add appropriate
locking to ensure that.
While the code in question will be removed altogether in a follow-up
commit, I believe it is still beneficial to have this corrected before
removal for future reference.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dc_link NULL handling in HPD init
amdgpu_dm_hpd_init() may see connectors without a valid dc_link.
The code already checks dc_link for the polling decision, but later
unconditionally dereferences it when setting up HPD interrupts.
Assign dc_link early and skip connectors where it is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()
error: we previously assumed 'dc_link' could be null (see line 931)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c
923 /*
924 * Analog connectors may be hot-plugged unlike other connector
925 * types that don't support HPD. Only poll analog connectors.
926 */
927 use_polling |=
928 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed
929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id);
930
931 dc_link = amdgpu_dm_connector->dc_link;
dc_link assigned here.
932
933 /*
934 * Get a base driver irq reference for hpd ints for the lifetime
935 * of dm. Note that only hpd interrupt types are registered with
936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
937 * hpd_rx isn't available. DM currently controls hpd_rx
938 * explicitly with dc_interrupt_set()
939 */
--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here.
941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
942 /*
943 * TODO: There's a mismatch between mode_info.num_hpd
944 * and what bios reports as the # of connectors with hpd
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: gfx3d: add parent to parent request map
After commit d228ece36345 ("clk: divider: remove round_rate() in favor
of determine_rate()") determining GFX3D clock rate crashes, because the
passed parent map doesn't provide the expected best_parent_hw clock
(with the roundd_rate path before the offending commit the
best_parent_hw was ignored).
Set the field in parent_req in addition to setting it in the req,
fixing the crash.
clk_hw_round_rate (drivers/clk/clk.c:1764) (P)
clk_divider_bestdiv (drivers/clk/clk-divider.c:336)
divider_determine_rate (drivers/clk/clk-divider.c:358)
clk_alpha_pll_postdiv_determine_rate (drivers/clk/qcom/clk-alpha-pll.c:1275)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
__clk_determine_rate (drivers/clk/clk.c:1741)
clk_gfx3d_determine_rate (drivers/clk/qcom/clk-rcg2.c:1268)
clk_core_determine_round_nolock (drivers/clk/clk.c:1606)
clk_core_round_rate_nolock (drivers/clk/clk.c:1701)
clk_core_round_rate_nolock (drivers/clk/clk.c:1710)
clk_round_rate (drivers/clk/clk.c:1804)
dev_pm_opp_set_rate (drivers/opp/core.c:1440 (discriminator 1))
msm_devfreq_target (drivers/gpu/drm/msm/msm_gpu_devfreq.c:51)
devfreq_set_target (drivers/devfreq/devfreq.c:360)
devfreq_update_target (drivers/devfreq/devfreq.c:426)
devfreq_monitor (drivers/devfreq/devfreq.c:458)
process_one_work (arch/arm64/include/asm/jump_label.h:36 include/trace/events/workqueue.h:110 kernel/workqueue.c:3284)
worker_thread (kernel/workqueue.c:3356 (discriminator 2) kernel/workqueue.c:3443 (discriminator 2))
kthread (kernel/kthread.c:467)
ret_from_fork (arch/arm64/kernel/entry.S:861)
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
PCI: endpoint: Add missing NULL check for alloc_workqueue()
alloc_workqueue() can return NULL on memory allocation failure. Without
proper error checking, this may lead to a NULL pointer dereference when
queue_work() is later called with the NULL workqueue pointer in
epf_ntb_epc_init().
Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on
failure to prevent the driver from loading with an invalid workqueue
pointer.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-03
In the Linux kernel, the following vulnerability has been resolved:
eventpoll: fix ep_remove struct eventpoll / struct file UAF
ep_remove() (via ep_remove_file()) cleared file->f_ep under
file->f_lock but then kept using @file inside the critical section
(is_file_epoll(), hlist_del_rcu() through the head, spin_unlock).
A concurrent __fput() taking the eventpoll_release() fastpath in
that window observed the transient NULL, skipped
eventpoll_release_file() and ran to f_op->release / file_free().
For the epoll-watches-epoll case, f_op->release is
ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which
kfree()s the watched struct eventpoll. Its embedded ->refs
hlist_head is exactly where epi->fllink.pprev points, so the
subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed
kmalloc-192 memory.
In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot
backing @file could be recycled by alloc_empty_file() --
reinitializing f_lock and f_ep -- while ep_remove() is still
nominally inside that lock. The upshot is an attacker-controllable
kmem_cache_free() against the wrong slab cache.
Pin @file via epi_fget() at the top of ep_remove() and gate the
critical section on the pin succeeding. With the pin held @file
cannot reach refcount zero, which holds __fput() off and
transitively keeps the watched struct eventpoll alive across the
hlist_del_rcu() and the f_lock use, closing both UAFs.
If the pin fails @file has already reached refcount zero and its
__fput() is in flight. Because we bailed before clearing f_ep,
that path takes the eventpoll_release() slow path into
eventpoll_release_file() and blocks on ep->mtx until the waiter
side's ep_clear_and_put() drops it. The bailed epi's share of
ep->refcount stays intact, so the trailing ep_refcount_dec_and_test()
in ep_clear_and_put() cannot free the eventpoll out from under
eventpoll_release_file(); the orphaned epi is then cleaned up
there.
A successful pin also proves we are not racing
eventpoll_release_file() on this epi, so drop the now-redundant
re-check of epi->dying under f_lock. The cheap lockless
READ_ONCE(epi->dying) fast-path bailout stays.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-30
In the Linux kernel, the following vulnerability has been resolved:
media: saa7164: add ioremap return checks and cleanups
Add checks for ioremap return values in saa7164_dev_setup(). If
ioremap for BAR0 or BAR2 fails, release the already allocated PCI
memory regions, remove the device from the global list, decrement
the device count, and return -ENODEV.
This prevents potential null pointer dereferences and ensures proper
cleanup on memory mapping failures.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-28
In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on registration failure
Make sure to disable and free the interrupts in case controller
registration fails to avoid a potential use-after-free and resource
leak.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-28
Page 1