Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume.
CVSS Score
5.4
EPSS Score
0.008
Published
2026-10-26
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel CoAP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
When the CoAP consumer could not build its response once the route had completed, CamelCoapResource caught the resulting exception and sent its message back to the CoAP client as the payload of a 5.00 Internal Server Error response. The typical case is a type conversion failure: the consumer converts the final message body to the byte[] payload, and the CamelCoapMaxAge and CamelCoapETag headers to their types, after the route has returned, and therefore outside the route's error handler. On the affected releases the message of such a failure names the class of the value being converted, carries the value's string form, and ends with the class name and message of the underlying cause, so a remote CoAP client could read internal detail about the deployment: class and package names, the string form of the value, such as the path of a file body, and whatever the cause carries, which in practice can include paths, host names and connection detail of a backend. The consumer had no option to suppress this, unlike the HTTP consumers, which offer a muteException option for that purpose. The exception raised by a failing route was not sent: the consumer did not check whether the exchange had failed, and answered a route failure with 2.05 Content and whatever body the message held at that point. Reaching the disclosure therefore requires a route whose completed response a remote client can make unconvertible, which depends on how the route is written.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. The upgrade is enough on its own: the new muteException consumer option defaults to true on all three fixed release lines, so the error response carries no payload without any configuration change. For deployments that cannot upgrade immediately, make sure the response can always be built once the route has completed: convert the body to byte[] or String as the last step of each route that consumes from a coap endpoint, for example with convertBodyTo, give the CamelCoapMaxAge and CamelCoapETag headers only values of their own types, and add an onException handler that marks the failure as handled and sets the response body explicitly, so that a conversion failure is raised and replaced inside the route rather than in the consumer.
CVSS Score
5.3
EPSS Score
0.006
Published
2026-10-26
Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release.
CVSS Score
8.8
EPSS Score
0.007
Published
2026-10-19
Use of Cache Containing Sensitive Information vulnerability in Apache Camel HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The OAuth2 client token cache is global to the JVM, and its key omitted several of the fields that determine what a token actually authorises: the requested scope, the resource indicator, and the token endpoint the token was obtained from. Two endpoints differing only in those fields therefore shared a cache entry, and an endpoint could be served a token minted for a different scope, a different resource, or by a different authorization server. The consequence is a request carrying broader authority than the endpoint was configured for, or a token presented to a party it was not issued for. Reaching it requires a deployment that configures more than one OAuth2 endpoint differing in exactly those fields, which is why the severity is assessed low.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The cache key now includes every field that shapes the token, so entries are no longer shared between endpoints that differ in any of them. For deployments that cannot upgrade immediately, run endpoints that differ in scope, resource indicator or token endpoint in separate JVMs so that they do not share the cache.
CVSS Score
4.8
EPSS Score
0.005
Published
2026-10-19
Exposure of Data Element to Wrong Session vulnerability in Apache Camel AS2 component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
Signing material belonging to an individual request was stored in state that is shared across requests rather than confined to the request being processed. Where a deployment serves more than one trading partner, concurrent or successive requests could therefore observe each other's material, and a Message Disposition Notification could be signed with the key of a partner other than the one the receipt was for. The result is cross-partner key confusion: a receipt attributable to the wrong partner, and one partner's signing material used while handling another partner's exchange. AS2 deployments are typically multi-partner by design, so the condition is reached by ordinary concurrent traffic rather than by anything the attacker must arrange.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Per-request signing keys are now confined to the request being processed in ResponseMDN. For deployments that cannot upgrade immediately, run a separate Camel context per trading partner so that no signing material is shared between them.
CVSS Score
6.5
EPSS Score
0.007
Published
2026-10-19
Improper Input Validation vulnerability in Apache Camel Core component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The saga processor consulted a header named Long-Running-Action to decide which saga an exchange belonged to. The name carries no Camel prefix, so it sits outside the namespace that consumer header filters block, and an external sender could supply it on an inbound message. That let the sender name the saga the exchange joined, attaching their request to a long-running action started by someone else, or causing compensation to be associated with an action they did not initiate. The header is only consulted by a saga service that uses it, which bounds the exposure to deployments running sagas over an LRA coordinator.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The header is now consulted only for a saga service that actually uses it, rather than on every exchange. For deployments that cannot upgrade immediately, strip the header at the trust boundary with removeHeaders("Long-Running-Action") on every consumer that accepts messages from an untrusted sender.
CVSS Score
4.8
EPSS Score
0.005
Published
2026-10-19
Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Jetty component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
Setting enableCORS on a Jetty endpoint installed Jetty's CrossOriginFilter with its stock defaults, which accept every origin and allow credentials. An operator asking for CORS therefore obtained a policy that lets a page on any origin make credentialed cross-origin requests to the endpoint and read the responses, without any indication that turning the option on had chosen an allow-all policy rather than an empty one to be filled in. This is the same defect class as the platform-http-vertx advisory published alongside it, in a different component.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. enableCORS no longer grants credentials to an origin the operator did not name. A deployment that relied on any origin being accepted must now list its origins explicitly. For deployments that cannot upgrade immediately, configure the CrossOriginFilter parameters explicitly rather than relying on what enableCORS installs, naming the allowed origins.
CVSS Score
4.3
EPSS Score
0.004
Published
2026-10-19
Improper Input Validation vulnerability in Apache Camel Mail component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
CVE-2026-46584 addressed mail headers reaching the Exchange without passing through a header filter, but the MimeMultipart data format retained an unfiltered path: unmarshalling a multipart message mapped mail.smtp headers onto the Exchange with no filter applied. Those names sit outside the Camel namespace that consumer filters block, so a message crafted by an external sender could still set them, and the mail.smtp namespace influences how a downstream mail producer connects and sends. This is an incomplete fix of CVE-2026-46584 rather than a new class of defect: a deployment that applied that advisory and considered camel-mail settled remained exposed on this path.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The MimeMultipart data format now applies the header filter on unmarshal, closing the path CVE-2026-46584 left open. For deployments that cannot upgrade immediately, strip the namespace after the data format with removeHeaders("mail.smtp*") before any mail producer.
CVSS Score
6.5
EPSS Score
0.005
Published
2026-10-19
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel gRPC component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When a route behind a gRPC consumer failed, the exception's message was placed into the gRPC status description. Unlike the status cause, which stays local to the server, the description is transmitted to the calling client, so an external caller able to provoke a failure could read the internal error message. What that discloses depends on the exception, and in practice includes class and package names, paths, host names and connection detail carried in messages. This is the gRPC member of the same unmuted-consumer-exception family as the knative, mina and CXF advisories published alongside it.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A muteException consumer option, defaulting to true, puts a generic description in the status instead of the route exception's message. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, map failures onto an explicit status in an onException handler so the framework never copies the exception message into the description.
CVSS Score
5.3
EPSS Score
0.005
Published
2026-10-19
Insufficient Granularity of Access Control vulnerability in Apache Camel Platform HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The component decided whether an endpoint ran in proxy mode by testing whether its configured path started with the string proxy, rather than by matching the path exactly. Any endpoint whose path merely begins with those characters - proxyStatus, proxy-config, proxying and so on - therefore became a proxy endpoint without the route author asking for it. A proxy endpoint forwards requests onward, so an endpoint that was intended to serve its own content instead relays traffic on behalf of whoever calls it, which is both a request forgery primitive and an exposure of whatever the forwarding path can reach.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Proxy mode is now selected by an exact path match rather than by prefix. For deployments that cannot upgrade immediately, rename any endpoint path that begins with proxy but is not intended to be a proxy.
CVSS Score
4.8
EPSS Score
0.005
Published
2026-10-19
Page 1