Zephyrproject: >> Zephyr >> 2.0.0 Security Vulnerabilities
The MCUmgr SMP-over-console transport decodes a base64 frame, reads a 16-bit packet length from it, verifies a CRC and then unconditionally strips the trailing CRC with rx_ctxt->nb->len -= 2U; in mcumgr_serial_process_frag() (subsys/mgmt/mcumgr/transport/src/serial_util.c). mcumgr_serial_extract_len() accepted any declared length, including 0 and 1, and a packet declaring length 0 passes the checksum test for free because crc16_itu_t() over zero bytes returns the zero seed. Since net_buf::len is a uint16_t, the subtraction underflows and the buffer is handed to SMP claiming roughly 65 KB of payload while its data area is only CONFIG_MCUMGR_TRANSPORT_NETBUF_SIZE bytes (default 384).
The trigger is a single unauthenticated 7-byte line on the management console — the 0x06 0x09 packet marker followed by the base64 group AAA= and a newline — delivered to any transport built on this helper: CONFIG_MCUMGR_TRANSPORT_UART (smp_uart.c) or CONFIG_MCUMGR_TRANSPORT_SHELL (smp_shell.c), both of which select MCUMGR_TRANSPORT_SERIAL_HAS_SMP_OVER_CONSOLE. No prior session state, fragmentation or credentials are required to trigger the underflow, and the malformed frame is mishandled before any command handler or command-level access control runs. The attacker only needs write access to that console, which on many boards is a USB CDC-ACM port rather than a bare UART header.
With the inflated length, smp_process_request_packet() in subsys/mgmt/mcumgr/smp/src/smp.c loses its bound: cbor_nb_reader_init() gives the CBOR decoder a ~65 KB window into a 384-byte buffer, and each request header's nh_len is checked only against the inflated length. On its own the 7-byte frame re-parses whatever stale bytes the reused pool buffer still holds, typically a replay of the previously received request followed by a parse error, without leaving the buffer. Because the transport is unauthenticated, though, the attacker also controls the frames sent before the trigger, and can stage buffer contents so that a request succeeds with an nh_len larger than the buffer; net_buf_pull(), guarded only by __ASSERT_NO_MSG, then moves the parse cursor out of bounds and the loop reads further headers and CBOR from adjacent memory. The consequence is an out-of-bounds read that can fault the MCUmgr thread (denial of service); memory disclosure is also possible, since the default-enabled os echo handler (CONFIG_MCUMGR_GRP_OS_ECHO) decodes its string inside that window and copies it into its response. There is no integrity gain beyond what the unauthenticated transport already permits.
The fix rejects any declared packet length of two bytes or fewer in mcumgr_serial_extract_len(), so the CRC-strip subtraction can no longer underflow. The identical pattern remains in the test-only loopback transport subsys/mgmt/mcumgr/transport/src/smp_dummy.c (CONFIG_MCUMGR_TRANSPORT_DUMMY), which has no external input path and therefore carries no practical exposure.
CVSS Score
6.8
EPSS Score
0.002
Published
2026-09-29
The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the option length len. When a registered path segment is longer than the supplied URI and the URI is a prefix of it, the loop reads uri[len] and beyond, past the end of the option value.
The path is reached from coap_well_known_core_get_len() and coap_well_known_core_get() via match_queries_resource(), i.e. by any unauthenticated GET /.well-known/core?href=/<prefix> request to a device that serves /.well-known/core (for the CoAP server subsystem, CONFIG_COAP_SERVER_WELL_KNOWN_CORE, default y) and has at least one resource that declares struct coap_core_metadata attributes.
The over-read does not reach the receive buffer. The well-known-core builders parse the query into a stack-local struct coap_option, whose value is a fixed array (value[12], or CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE bytes) that the option bytes are copied into, so uri points into that copy. Reading past len therefore reads the unused, uninitialized tail of the array and, when the option fills it, the bytes just past it in the same stack frame. (In the ZoAP library of v1.8.0 to v1.9.x the option value was instead a pointer into the received packet, and the over-read ran past the option inside the packet buffer.)
The impact is bounded. The number of bytes read past the end is limited by the length of the resource path segment, and each additional byte is only read if it happens to equal the next path character, so in practice the over-read is one byte. It also cannot influence the response: returning a match requires the final compared index to be len - 1 or len, both in bounds, so out-of-bounds bytes only ever steer the loop to the next candidate resource. The consequence is undefined behaviour, not information disclosure and not a matching error.
The fix adds a k >= len guard at the top of the inner loop, so every uri[k] dereference is within the option value while still allowing a trailing * wildcard to match a longer path.
CVSS Score
3.7
EPSS Score
0.002
Published
2026-09-28
Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).
CVSS Score
5.8
EPSS Score
0.006
Published
2026-07-31
In Zephyr's userspace dynamic-objects subsystem, thread_idx_alloc() in kernel/userspace/userspace.c allocated a new thread permission index from the global _thread_idx_map[] bitmap without holding lists_lock.
On SMP systems, two user-mode threads invoking the k_object_alloc(K_OBJ_THREAD) syscall concurrently can both observe the same low free bit, perform the same non-atomic RMW to clear it, and return the identical tidx.
The two newly created K_OBJ_THREAD objects are then assigned the same thread_id, so the two user threads alias a single bit position in every kernel object's perms[] bitfield: any subsequent grant of access on a kernel object to one thread is implicitly a grant to the other, defeating userspace ACL isolation. A secondary lost-update window between the unlocked &=~BIT() in alloc and the locked |= BIT() in thread_idx_free() can also leak entries from the thread-index pool.
The defect is reachable from any user-mode thread via the unrestricted __syscall k_object_alloc and is gated on CONFIG_USERSPACE, CONFIG_DYNAMIC_OBJECTS, and CONFIG_SMP. The flaw was introduced when the per-thread permission index was added in 2018 and is present in every release up to and including v4.4.0. Fixed by holding lists_lock across the bitmap RMW and the permissions clear (and inlining the obj_list traversal that previously took the lock itself).
CVSS Score
6.5
EPSS Score
0.001
Published
2026-07-25
The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency.
spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure().
On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service.
The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact.
CVSS Score
3.3
EPSS Score
0.001
Published
2026-07-21
The CONFIG_USERSPACE syscall verifier z_vrfy_k_poll() in kernel/poll.c allocates a kernel-side copy of the user-supplied k_poll_event[] via z_thread_malloc() and then validates each event's object handle. Before this fix, validation used K_OOPS(K_SYSCALL_OBJ(...)) inline inside the loop, which kills the calling thread without freeing events_copy.
A user thread can pass num_events >= 1 with a forged object handle to leak the allocation; because newly spawned user threads inherit the parent's resource_pool (kernel/thread.c), an attacker spawns sacrificial threads to repeat the leak until the shared kernel heap is exhausted. Once depleted, legitimate kernel allocations from that pool (k_queue alloc nodes, k_msgq buffers, future k_poll calls, etc.) fail, causing a system-level denial of service.
The fix replaces each inline K_OOPS with a conditional goto oops_free so the buffer is freed before the thread is killed. Affects Zephyr releases from v1.12.0 (when k_poll was first exposed to user mode) through v4.4.1.
CVSS Score
6.5
EPSS Score
0.001
Published
2026-07-21
The CONFIG_USERSPACE verification handler for the k_thread_name_copy() system call (z_vrfy_k_thread_name_copy() in kernel/thread.c) calls k_object_find() on the caller-supplied thread pointer and then dereferences the returned struct k_object without checking it for NULL. k_object_find() returns NULL whenever the supplied pointer is not a registered (static or dynamic) kernel object.
The pre-fix guard tested thread == NULL instead of ko == NULL, so an unprivileged user-mode thread that invokes k_thread_name_copy() with any non-NULL but unregistered pointer (e.g. an arbitrary address) passes the NULL test, after which the verifier reads ko->type through a NULL pointer.
Because the syscall verifier runs in supervisor mode, this NULL dereference is a kernel-mode fault that halts or reboots the system, allowing untrusted user code to crash the kernel across the userspace security boundary (denial of service). The marshaller passes the thread argument to the verifier without any prior K_SYSCALL_OBJ validation, so the bad pointer reaches the defect directly.
The flaw affects builds with CONFIG_USERSPACE and CONFIG_THREAD_NAME enabled and has been present since the special-case lookup was introduced around v2.0.0; it is present in v4.4.0 and earlier. The fix changes the guard to check the k_object_find() return value (ko == NULL) before dereferencing it.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-07-14
parse_ipv4() in subsys/net/ip/utils.c (reached via net_ipaddr_parse() for strings of the form "a.b.c.d:port") copies the port substring into a fixed 17-byte stack buffer (char ipaddr[NET_IPV4_ADDR_LEN + 1]) using a length of str_len - end - 1, where str_len is the full, unbounded input length and end is only the (<=15-byte) offset of the ':' delimiter. Because the destination size is never consulted, a crafted address string with a long suffix after the colon (e.g. "1.2.3.4:" followed by hundreds of bytes) causes an out-of-bounds stack write whose length and contents are fully attacker-controlled (memcpy of the suffix plus a trailing NUL), enabling memory corruption and at minimum a denial of service, and potentially control-flow hijack. The parser is reached from the standard socket API (zsock_getaddrinfo / literal-address resolution), DNS server-string configuration, and the eswifi Wi-Fi co-processor DNS-response path, so an application that resolves a network-influenced address string is exposed. The bug was introduced when the parser was added (Zephyr v1.9.0) and shipped in all releases through v4.4.0. The fix removes the unbounded copy and validates the port length before copying into a small dedicated buffer. Note: the equivalent IPv6 "[addr]:port" path in parse_ipv6() retains the same unbounded copy at this commit and remains a separate, still-reachable instance of the defect.
CVSS Score
8.1
EPSS Score
0.007
Published
2026-07-12
Zephyr's dynamic kernel-object tracking (kernel/userspace/userspace.c, formerly kernel/userspace.c) maintains a doubly-linked list (obj_list) of dynamically allocated kernel objects. Iteration over this list in k_object_wordlist_foreach() was performed under lists_lock using the SAFE iterator (which caches the next node), but list removal and freeing of nodes was performed under different, disjoint spinlocks: objfree_lock in k_object_free() and obj_lock in unref_check(). On an SMP system, while one CPU iterated obj_list under lists_lock, another CPU could unlink and k_free() the dyn_obj node that the iterator had cached as its next pointer, causing the iterator to dereference freed kernel memory (use-after-free / dangling list traversal). All of the racing operations are reachable from unprivileged user-mode threads via system calls: k_object_alloc/k_object_alloc_size and k_object_release drive removals through unref_check() (under obj_lock), while k_thread_abort and thread creation drive the iteration through k_thread_perms_all_clear()/k_thread_perms_inherit() (under lists_lock). A deprivileged user thread on a CONFIG_SMP + CONFIG_USERSPACE build can therefore corrupt the kernel's object-tracking structures across the userspace security boundary, yielding kernel memory corruption (potential privilege escalation) or a kernel crash (denial of service). The fix removes objfree_lock and serializes every obj_list modification under lists_lock, including holding it across find+remove in k_object_free() and around unref_check() in k_thread_perms_clear(). Affects CONFIG_SMP+CONFIG_USERSPACE+CONFIG_DYNAMIC_OBJECTS configurations; the defect dates to the 2019 spinlockification (commit 8a3d57b6cc6, first released in v1.14.0) and shipped through v4.4.0.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-07-12
Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator.
The hostname (query) is the caller-supplied name passed through the standard getaddrinfo()/dns_get_addr_info()/dns_resolve_name() path and is influenceable by operators or remote inputs (server names from configuration, parsed URLs, or app-facing interfaces).
On a tightly-sized buffer with no slack (for example a userspace getaddrinfo call where the hostname is copied with k_usermode_string_alloc_copy to exactly strlen+1 bytes), the over-read crosses the allocation boundary; if that boundary is unmapped (guard page, memory-domain boundary under MPU, or an address sanitizer) the over-read faults, causing a denial of service. The over-read bytes are never returned, so there is no information disclosure.
The flaw is compiled only when CONFIG_MDNS_RESOLVER is enabled, exists since v1.10.0, and is fixed by replacing the fixed-length memcmp with a NUL-safe strcmp(ptr, ".local").
CVSS Score
3.7
EPSS Score
0.004
Published
2026-07-05
Page 1