Zephyrproject: >> Zephyr >> 1.8.99 Security Vulnerabilities
Zephyr's IPv6 forwarding path re-sent routed unicast packets without ever decrementing the IPv6 hop limit. Both routing branches of ipv6_route_packet() (subsys/net/ip) were affected: the explicit-route path (net_route_packet()) and the on-link cross-interface path (net_route_packet_if()). Each set the packet forwarding flag and called net_send_data() with the hop limit untouched and no expiry check.
Per RFC 8200 the hop-limit decrement is the mechanism that bounds packet lifetime and terminates routing loops; without it, a device acting as an IPv6 router relays looping packets indefinitely. An on-path attacker who can induce or exploit a transient L3 loop turns it into a permanent forwarding storm, causing CPU/bandwidth resource exhaustion (availability DoS) on the forwarder and adjacent links; path-discovery and loop diagnostics that rely on hop-limit expiry are also defeated.
Affected configurations. In every affected release the forwarding path is reached via CONFIG_NET_ROUTE (enabled by default when CONFIG_NET_IPV6_NBR_CACHE is set), together with CONFIG_NET_ROUTING for cross-interface routing. Note that CONFIG_NET_IPV6_FORWARDING and CONFIG_NET_IPV4_FORWARDING — which appear in the fix and in this advisory's evidence notes — were introduced after v4.4.0, when the routing options were split and renamed; they do not exist in any affected release. When auditing a v4.4.1-or-earlier configuration, look for CONFIG_NET_ROUTE and CONFIG_NET_ROUTING.
IPv4 is not affected in any release. The IPv4 forwarding path (net_route_ipv4_packet() in route_ipv4.c) was added after v4.4.0 and has never shipped in a release. Its TTL decrement and IPv4 header-checksum recomputation landed on main as part of the same fix, so the evidence notes below discuss it, but no released version is reachable by way of IPv4.
Affected releases are v1.8.0 through v4.4.1: v1.8.0 introduced net_route_packet() and v2.2.0 added net_route_packet_if(), and neither decremented the hop limit. v4.3.1 carries the explicit-route fix but not the on-link one, so it is affected as well. Fixed on main by 7d8f1afa7345 (explicit-route path) and 589eadc74efa (on-link path).
CVSS Score
5.8
EPSS Score
0.003
Published
2026-07-31
The DesignWare SPI driver (drivers/spi/spi_dw.c) computed the SPI BAUDR clock divider as info->clock_frequency / config->frequency without validating config->frequency.
spi_transceive is a Zephyr __syscall and its verify handler (drivers/spi/spi_handlers.c) copies the caller-supplied spi_config from userspace without checking the frequency field, so a userspace thread that has been granted access to a DesignWare SPI device kernel object can pass frequency = 0 and trigger an unsigned integer divide-by-zero in spi_dw_configure().
On Cortex-M Mainline (SCB->CCR.DIV_0_TRP is set in z_arm_fault_init()) and on ARC (a dedicated __ev_div_zero vector) this raises a CPU exception, resulting in a kernel fault and local denial of service.
The fix rejects zero frequency and frequencies above clock_frequency / 2 (the DesignWare SSI databook minimum SCKDIV of 2) with -EINVAL. The defect affects all Zephyr releases up to and including v4.4.0; exploitation requires CONFIG_USERSPACE=y and an unprivileged thread already granted SPI driver permission. There is no memory-corruption or information-disclosure impact.
CVSS Score
3.3
EPSS Score
0.001
Published
2026-07-21
A race condition in the Zephyr Bluetooth Classic RFCOMM host stack (subsys/bluetooth/host/classic/rfcomm.c) mishandles a simultaneous bidirectional session disconnect. When the local device has initiated a session teardown (state BT_RFCOMM_STATE_DISCONNECTING, DISC sent, RTX timer armed) and the connected peer concurrently sends its own DISC frame for dlci 0, rfcomm_handle_disc() invokes rfcomm_session_disconnected(), which unconditionally forced the session to BT_RFCOMM_STATE_DISCONNECTED without ever calling bt_l2cap_chan_disconnect().
Because the recovery timer was also cancelled and a later UA is ignored in the DISCONNECTED state, the session becomes permanently wedged: the underlying L2CAP channel is never released and the session slot in the fixed bt_rfcomm_pool[CONFIG_BT_MAX_CONN] array is never reclaimed (its conn pointer stays set).
Subsequent bt_rfcomm_dlc_connect() calls on that connection fail with -EINVAL due to the invalid session state, so RFCOMM service is denied for that peer, and repeated occurrences can exhaust the session pool. The DISC frame is peer-controlled over the air, but exploitation requires the peer's DISC to collide with a local-initiated disconnect (a high-complexity timing race). Impact is availability/resource-leak only; there is no memory-safety, confidentiality, or integrity consequence. The defect shipped in released versions (present in v4.4.0 and earlier).
The fix only transitions to DISCONNECTED when the session is not already in DISCONNECTING, preserving the proper L2CAP teardown path.
CVSS Score
3.1
EPSS Score
0.002
Published
2026-06-30
The IPv6 Neighbor Discovery handlers in subsys/net/ip/ipv6_nbr.c (handle_ra_input, handle_ns_input, handle_na_input) used an incorrect boolean expression that combined the RFC 4861 validity checks with the ICMPv6 code check using the wrong operator precedence: the form was ((length/hop/source/target checks) && (icmp_hdr->code != 0)). Because every legitimate ND message carries ICMPv6 code 0, an attacker setting code == 0 (the normal value) caused the entire predicate to evaluate false, so the packet was never dropped and all of the other checks were silently skipped. The bypassed checks include the mandatory Hop Limit == 255 verification (which proves an ND packet originated on-link and was not forwarded) and, for Router Advertisements, the requirement that the source be a link-local address, as well as multicast-target sanity checks. As a result, an adjacent on-link attacker — and, because the Hop-Limit-255 guard is bypassed, potentially a remote/off-link attacker whose packets would otherwise be rejected — can have forged Router Advertisement, Neighbor Solicitation, and Neighbor Advertisement messages accepted. A forged RA lets the attacker reconfigure the victim's default router, on-link prefixes (SLAAC), MTU, reachable/retransmit timers, and (with CONFIG_NET_IPV6_RA_RDNSS) DNS servers, while forged NS/NA enable neighbor-cache poisoning, enabling man-in-the-middle, traffic redirection, and denial of service. The flaw is an input-validation/authentication weakness rather than a memory-safety issue: the underlying packet-parsing primitives (net_pkt_get_data, net_pkt_read, net_pkt_skip) are independently bounds-safe and the validated length is the true buffer length, so skipping the length check causes no out-of-bounds access. The defect has existed since the logic was introduced in 2018 and shipped in all releases through v4.4.0; it is fixed by splitting the condition so any failing check drops the packet.
CVSS Score
8.1
EPSS Score
0.003
Published
2026-06-29
Zephyr's IPv6 network stack can be prevented from receiving or processing future incoming packets by sending a small number of maliciously fragmented IPv6 packets. When such a packet is handled by the fragment-header processing path, the associated RX network packet buffer (allocated from a memory slab) is not released back to the pool. Repeating the malicious packet exhausts all RX buffer slots, after which the device can no longer obtain RX buffers and stops receiving traffic, resulting in a denial of service.
CVSS Score
7.5
EPSS Score
0.003
Published
2026-06-25
The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME is 255, so the check is always false; the function then memcpy'd up to 255 name bytes and the lookup/readdir paths advanced traversal by an unvalidated de_rec_len. Each directory block is read into a block_size-sized slab buffer, and block_off can be driven near the block end by preceding entries' rec_len, so the 8-byte header read and the subsequent name memcpy can read up to ~263 bytes past the end of the block buffer into adjacent heap/slab memory. On the readdir path those bytes are returned to the caller in fs_dirent.name, leaking adjacent kernel heap memory; a de_rec_len of 0 also causes a zero-progress infinite loop (denial of service), and the unlink path's memmove(de, next, next_reclen) over unvalidated records is an additional OOB read/write source. The defect is reached by any path-based operation (open, stat, unlink, rename, mkdir) or directory listing on a mounted ext2 volume, so a crafted or corrupted ext2 image on attacker-supplied storage (SD card, USB mass storage, or otherwise mounted image) triggers it. Affected: Zephyr ext2 from its introduction in v3.5.0 through v4.4.0. The fix validates rec_len and name_len in the parser and rejects entries whose header does not fit the remaining block or whose rec_len crosses the block boundary in every traversal caller.
CVSS Score
4.9
EPSS Score
0.002
Published
2026-06-23
bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x09 followed by a 2-byte attribute ID) causes a one-byte read past the end of the logical buffer. The parser is reachable from inbound, remote-controlled data: a Bluetooth BR/EDR peer acting as an SDP server returns discovery-response records that are stored verbatim in the client receive buffer and parsed via the public bt_sdp_get_attr()/bt_sdp_has_attr()/bt_sdp_record_parse() helpers. The over-read is bounded to a single byte that is used only as an internal length selector and is never leaked to the attacker; subsequent length checks then reject the malformed record. Realistic impact is therefore limited to an edge-case denial of service (a fault only if the record ends exactly at a mapped-memory boundary, or a deterministic assert panic when CONFIG_ASSERT=y). Affects Zephyr v4.3.0 and v4.4.0; fixed by adding sizeof(type) to the length check.
CVSS Score
7.1
EPSS Score
0.003
Published
2026-06-23
bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The flaw affects ISO receive builds (CONFIG_BT_ISO_RX, selected by the default-off LE Audio options BT_ISO_PERIPHERAL/BT_ISO_CENTRAL/BT_ISO_SYNC_RECEIVER) and has existed since the ISO subsystem was introduced (v2.6.0) through v4.4.0. The fix adds explicit buf->len < sizeof(ts_hdr) and buf->len < sizeof(hdr) checks that drop the buffer before pulling.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-06-23
A remote, unauthenticated BLE peer can trigger a 2-byte out-of-bounds write in the Bluetooth host during L2CAP LE CoC SDU reassembly. When the application enables segmentation (via chan_ops.alloc_buf) and the chosen RX pool has a user_data_size smaller than 2 bytes, the segmentation counter stored in the net_buf user_data area is written out of bounds in l2cap_chan_le_recv_seg (subsys/bluetooth/host/l2cap.c). The observed effects are an AddressSanitizer abort and, without ASan, heap corruption / fatal error.
CVSS Score
7.6
EPSS Score
0.005
Published
2026-06-09
A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a fixed-size buffer using the caller-controlled addrlen value without validating it against the destination size. struct net_sockaddr is an opaque type, so an application can pass an addrlen larger than sizeof(struct net_sockaddr) (for example 128 bytes into a 24-byte stack buffer), causing the memcpy to read and write past the end of the address memory used by the TLS session cache. This out-of-bounds write can lead to a crash and denial of service, and potentially to arbitrary code execution.
CVSS Score
6.3
EPSS Score
0.003
Published
2026-06-04
Page 1