Apache: >> Cloudstack Security Vulnerabilities
In Apache CloudStack, a flaw in access control affects the listTemplates and listIsos APIs. A malicious Domain Admin or Resource Admin can exploit this issue by intentionally specifying the 'domainid' parameter along with the 'filter=self' or 'filter=selfexecutable' values. This allows the attacker to gain unauthorized visibility into templates and ISOs under the ROOT domain.
A malicious admin can enumerate and extract metadata of templates and ISOs that belong to unrelated domains, violating isolation boundaries and potentially exposing sensitive or internal configuration details.
This vulnerability has been fixed by ensuring the domain resolution strictly adheres to the caller's scope rather than defaulting to the ROOT domain.
Affected users are recommended to upgrade to Apache CloudStack 4.19.3.0 or 4.20.1.0.
CVSS Score
4.7
EPSS Score
0.001
Published
2025-06-11
A privilege escalation vulnerability exists in Apache CloudStack versions 4.10.0.0 through 4.20.0.0 where a malicious Domain Admin user in the ROOT domain can reset the password of user-accounts of Admin role type. This operation is not appropriately restricted and allows the attacker to assume control over higher-privileged user-accounts. A malicious Domain Admin attacker can impersonate an Admin user-account and gain access to sensitive APIs and resources that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.19.3.0 or 4.20.1.0, which fixes the issue with the following:
* Strict validation on Role Type hierarchy: the caller's user-account role must be equal to or higher than the target user-account's role.
* API privilege comparison: the caller must possess all privileges of the user they are operating on.
* Two new domain-level settings (restricted to the default Admin):
- role.types.allowed.for.operations.on.accounts.of.same.role.type: Defines which role types are allowed to act on users of the same role type. Default: "Admin, DomainAdmin, ResourceAdmin".
- allow.operations.on.users.in.same.account: Allows/disallows user operations within the same account. Default: true.
CVSS Score
8.8
EPSS Score
0.001
Published
2025-06-10
A privilege escalation vulnerability exists in Apache CloudStack versions 4.10.0.0 through 4.20.0.0 where a malicious Domain Admin user in the ROOT domain can get the API key and secret key of user-accounts of Admin role type in the same domain. This operation is not appropriately restricted and allows the attacker to assume control over higher-privileged user-accounts. A malicious Domain Admin attacker can impersonate an Admin user-account and gain access to sensitive APIs and resources that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.19.3.0 or 4.20.1.0, which fixes the issue with the following:
* Strict validation on Role Type hierarchy: the caller's role must be equal to or higher than the target user's role.
* API privilege comparison: the caller must possess all privileges of the user they are operating on.
* Two new domain-level settings (restricted to the default admin):
- role.types.allowed.for.operations.on.accounts.of.same.role.type: Defines which role types are allowed to act on users of the same role type. Default: "Admin, DomainAdmin, ResourceAdmin".
- allow.operations.on.users.in.same.account: Allows/disallows user operations within the same account. Default: true.
CVSS Score
8.8
EPSS Score
0.001
Published
2025-06-10
When an Apache CloudStack user-account creates a CKS-based Kubernetes cluster in a project, the API key and the secret key of the 'kubeadmin' user of the caller account are used to create the secret config in the CKS-based Kubernetes cluster. A member of the project who can access the CKS-based Kubernetes cluster, can also access the API key and secret key of the 'kubeadmin' user of the CKS cluster's creator's account. An attacker who's a member of the project can exploit this to impersonate and perform privileged actions that can result in complete compromise of the confidentiality, integrity, and availability of resources owned by the creator's account.
CKS users are recommended to upgrade to version 4.19.3.0 or 4.20.1.0, which fixes this issue.Updating Existing Kubernetes Clusters in ProjectsA service account should be created for each project to provide limited access specifically for Kubernetes cluster providers and autoscaling. Follow the steps below to create a new service account, update the secret inside the cluster, and regenerate existing API and service keys:1. Create a New Service AccountCreate a new account using the role "Project Kubernetes Service Role" with the following details:
Account Name
kubeadmin-<FIRST_EIGHT_CHARACTERS_OF_PROJECT_ID>
First Name
Kubernetes
Last Name
Service User
Account Type
0 (Normal User)
Role ID
<ID_OF_SERVICE_ROLE>
2. Add the Service Account to the ProjectAdd this account to the project where the Kubernetes cluster(s) are hosted.
3. Generate API and Secret KeysGenerate API Key and Secret Key for the default user of this account.
4. Update the CloudStack Secret in the Kubernetes ClusterCreate a temporary file `/tmp/cloud-config` with the following data:
api-url = <API_URL> # For example: <MS_URL>/client/api
api-key = <SERVICE_USER_API_KEY>
secret-key = <SERVICE_USER_SECRET_KEY>
project-id = <PROJECT_ID>
Delete the existing secret using kubectl and Kubernetes cluster config:
./kubectl --kubeconfig kube.conf -n kube-system delete secret cloudstack-secret
Create a new secret using kubectl and Kubernetes cluster config:
./kubectl --kubeconfig kube.conf -n kube-system create secret generic cloudstack-secret --from-file=/tmp/cloud-config
Remove the temporary file:
rm /tmp/cloud-config5. Regenerate API and Secret KeysRegenerate the API and secret keys for the original user account that was used to create the Kubernetes cluster.
CVSS Score
8.1
EPSS Score
0.001
Published
2025-06-10
The CloudStack Quota plugin has an improper privilege management logic in version 4.20.0.0. Anyone with authenticated user-account access in CloudStack 4.20.0.0 environments, where this plugin is enabled and have access to specific APIs can enable or disable reception of quota-related emails for any account in the environment and list their configurations.
Quota plugin users using CloudStack 4.20.0.0 are recommended to upgrade to CloudStack version 4.20.1.0, which fixes this issue.
CVSS Score
4.3
EPSS Score
0.001
Published
2025-06-10
CloudStack users can add and read comments (annotations) on resources they are authorised to access.
Due to an access validation issue that affects Apache CloudStack versions from 4.16.0, users who have access, prior access or knowledge of resource UUIDs can list and add comments (annotations) to such resources.
An attacker with a user-account and access or prior knowledge of resource UUIDs may exploit this issue to read contents of the comments (annotations) or add malicious comments (annotations) to such resources.
This may cause potential loss of confidentiality of CloudStack environments and resources if the comments (annotations) contain any privileged information. However, guessing or brute-forcing resource UUIDs are generally hard to impossible and access to listing or adding comments isn't same as access to CloudStack resources, making this issue of very low severity and general low impact.
CloudStack admins may also disallow listAnnotations and addAnnotation API access to non-admin roles in their environment as an interim measure.
CVSS Score
4.3
EPSS Score
0.119
Published
2025-01-13
Account users in Apache CloudStack by default are allowed to register templates to be downloaded directly to the primary storage for deploying instances. Due to missing validation checks for KVM-compatible templates in CloudStack 4.0.0 through 4.18.2.4 and 4.19.0.0 through 4.19.1.2, an attacker that can register templates, can use them to deploy malicious instances on KVM-based environments and exploit this to gain access to the host filesystems that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of KVM-based infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.18.2.5 or 4.19.1.3, or later, which addresses this issue.
Additionally, all user-registered KVM-compatible templates can be scanned and checked that they are flat files that should not be using any additional or unnecessary features. For example, operators can run the following command on their file-based primary storage(s) and inspect the output. An empty output for the disk being validated means it has no references to the host filesystems; on the other hand, if the output for the disk being validated is not empty, it might indicate a compromised disk. However, bear in mind that (i) volumes created from templates will have references for the templates at first and (ii) volumes can be consolidated while migrating, losing their references to the templates. Therefore, the command execution for the primary storages can show both false positives and false negatives.
for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info. If the output is not empty, that might indicate a compromised disk; check it carefully."; qemu-img info -U $file | grep file: ; printf "\n\n"; done
For checking the whole template/volume features of each disk, operators can run the following command:
for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info."; qemu-img info -U $file; printf "\n\n"; done
CVSS Score
8.5
EPSS Score
0.009
Published
2024-11-12
Users logged into the Apache CloudStack's web interface can be tricked to submit malicious CSRF requests due to missing validation of the origin of the requests. This can allow an attacker to gain privileges and access to resources of the authenticated users and may lead to account takeover, disruption, exposure of sensitive data and compromise integrity of the resources owned by the user account that are managed by the platform.
This issue affects Apache CloudStack from 4.15.1.0 through 4.18.2.3 and 4.19.0.0 through 4.19.1.1
Users are recommended to upgrade to Apache CloudStack 4.18.2.4 or 4.19.1.2, or later, which addresses this issue.
CVSS Score
8.0
EPSS Score
0.001
Published
2024-10-16
Account users in Apache CloudStack by default are allowed to upload and register templates for deploying instances and volumes for attaching them as data disks to their existing instances. Due to missing validation checks for KVM-compatible templates or volumes in CloudStack 4.0.0 through 4.18.2.3 and 4.19.0.0 through 4.19.1.1, an attacker that can upload or register templates and volumes, can use them to deploy malicious instances or attach uploaded volumes to their existing instances on KVM-based environments and exploit this to gain access to the host filesystems that could result in the compromise of resource integrity and confidentiality, data loss, denial of service, and availability of KVM-based infrastructure managed by CloudStack.
Users are recommended to upgrade to Apache CloudStack 4.18.2.4 or 4.19.1.2, or later, which addresses this issue.
Additionally, all user-uploaded or registered KVM-compatible templates and volumes can be scanned and checked that they are flat files that should not be using any additional or unnecessary features. For example, operators can run this on their secondary storage(s) and inspect output. An empty output for the disk being validated means it has no references to the host filesystems; on the other hand, if the output for the disk being validated is not empty, it might indicate a compromised disk.
for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info. If the output is not empty, that might indicate a compromised disk; check it carefully."; qemu-img info -U $file | grep file: ; printf "\n\n"; done
The command can also be run for the file-based primary storages; however, bear in mind that (i) volumes created from templates will have references for the templates at first and (ii) volumes can be consolidated while migrating, losing their references to the templates. Therefore, the command execution for the primary storages can show both false positives and false negatives.
For checking the whole template/volume features of each disk, operators can run the following command:
for file in $(find /path/to/storage/ -type f -regex [a-f0-9\-]*.*); do echo "Retrieving file [$file] info."; qemu-img info -U $file; printf "\n\n"; done
CVSS Score
8.5
EPSS Score
0.016
Published
2024-10-16
The CloudStack Quota feature allows cloud administrators to implement a quota or usage limit system for cloud resources, and is disabled by default. In environments where the feature is enabled, due to missing access check enforcements, non-administrative CloudStack user accounts are able to access and modify quota-related configurations and data. This issue affects Apache CloudStack from 4.7.0 through 4.18.2.3; and from 4.19.0.0 through 4.19.1.1, where the Quota feature is enabled.
Users are recommended to upgrade to Apache CloudStack 4.18.2.4 or 4.19.1.2, or later, which addresses this issue. Alternatively, users that do not use the Quota feature are advised to disabled the plugin by setting the global setting "quota.enable.service" to "false".
CVSS Score
5.7
EPSS Score
0.001
Published
2024-10-16
Page 1