In the Linux kernel, the following vulnerability has been resolved:
coresight: Clear the connection field properly
coresight devices track their connections (output connections) and
hold a reference to the fwnode. When a device goes away, we walk through
the devices on the coresight bus and make sure that the references
are dropped. This happens both ways:
a) For all output connections from the device, drop the reference to
the target device via coresight_release_platform_data()
b) Iterate over all the devices on the coresight bus and drop the
reference to fwnode if *this* device is the target of the output
connection, via coresight_remove_conns()->coresight_remove_match().
However, the coresight_remove_match() doesn't clear the fwnode field,
after dropping the reference, this causes use-after-free and
additional refcount drops on the fwnode.
e.g., if we have two devices, A and B, with a connection, A -> B.
If we remove B first, B would clear the reference on B, from A
via coresight_remove_match(). But when A is removed, it still has
a connection with fwnode still pointing to B. Thus it tries to drops
the reference in coresight_release_platform_data(), raising the bells
like :
[ 91.990153] ------------[ cut here ]------------
[ 91.990163] refcount_t: addition on 0; use-after-free.
[ 91.990212] WARNING: CPU: 0 PID: 461 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x144
[ 91.990260] Modules linked in: coresight_funnel coresight_replicator coresight_etm4x(-)
crct10dif_ce coresight ip_tables x_tables ipv6 [last unloaded: coresight_cpu_debug]
[ 91.990398] CPU: 0 PID: 461 Comm: rmmod Tainted: G W T 5.19.0-rc2+ #53
[ 91.990418] Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Feb 1 2019
[ 91.990434] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 91.990454] pc : refcount_warn_saturate+0xa0/0x144
[ 91.990476] lr : refcount_warn_saturate+0xa0/0x144
[ 91.990496] sp : ffff80000c843640
[ 91.990509] x29: ffff80000c843640 x28: ffff800009957c28 x27: ffff80000c8439a8
[ 91.990560] x26: ffff00097eff1990 x25: ffff8000092b6ad8 x24: ffff00097eff19a8
[ 91.990610] x23: ffff80000c8439a8 x22: 0000000000000000 x21: ffff80000c8439c2
[ 91.990659] x20: 0000000000000000 x19: ffff00097eff1a10 x18: ffff80000ab99c40
[ 91.990708] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80000abf6fa0
[ 91.990756] x14: 000000000000001d x13: 0a2e656572662d72 x12: 657466612d657375
[ 91.990805] x11: 203b30206e6f206e x10: 6f69746964646120 x9 : ffff8000081aba28
[ 91.990854] x8 : 206e6f206e6f6974 x7 : 69646461203a745f x6 : 746e756f63666572
[ 91.990903] x5 : ffff00097648ec58 x4 : 0000000000000000 x3 : 0000000000000027
[ 91.990952] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00080260ba00
[ 91.991000] Call trace:
[ 91.991012] refcount_warn_saturate+0xa0/0x144
[ 91.991034] kobject_get+0xac/0xb0
[ 91.991055] of_node_get+0x2c/0x40
[ 91.991076] of_fwnode_get+0x40/0x60
[ 91.991094] fwnode_handle_get+0x3c/0x60
[ 91.991116] fwnode_get_nth_parent+0xf4/0x110
[ 91.991137] fwnode_full_name_string+0x48/0xc0
[ 91.991158] device_node_string+0x41c/0x530
[ 91.991178] pointer+0x320/0x3ec
[ 91.991198] vsnprintf+0x23c/0x750
[ 91.991217] vprintk_store+0x104/0x4b0
[ 91.991238] vprintk_emit+0x8c/0x360
[ 91.991257] vprintk_default+0x44/0x50
[ 91.991276] vprintk+0xcc/0xf0
[ 91.991295] _printk+0x68/0x90
[ 91.991315] of_node_release+0x13c/0x14c
[ 91.991334] kobject_put+0x98/0x114
[ 91.991354] of_node_put+0x24/0x34
[ 91.991372] of_fwnode_put+0x40/0x5c
[ 91.991390] fwnode_handle_put+0x38/0x50
[ 91.991411] coresight_release_platform_data+0x74/0xb0 [coresight]
[ 91.991472] coresight_unregister+0x64/0xcc [coresight]
[ 91.991525] etm4_remove_dev+0x64/0x78 [coresight_etm4x]
[ 91.991563] etm4_remove_amba+0x1c/0x2c [coresight_etm4x]
[ 91.991598] amba_remove+0x3c/0x19c
---truncated---
In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Allow waiting for commands to complete on removed device
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read.
In the Linux kernel, the following vulnerability has been resolved:
iio: light: isl29028: Fix the warning in isl29028_remove()
The driver use the non-managed form of the register function in
isl29028_remove(). To keep the release order as mirroring the ordering
in probe, the driver should use non-managed form in probe, too.
The following log reveals it:
[ 32.374955] isl29028 0-0010: remove
[ 32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[ 32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[ 32.385461] Call Trace:
[ 32.385807] sysfs_unmerge_group+0x59/0x110
[ 32.386110] dpm_sysfs_remove+0x58/0xc0
[ 32.386391] device_del+0x296/0xe50
[ 32.386959] cdev_device_del+0x1d/0xd0
[ 32.387231] devm_iio_device_unreg+0x27/0xb0
[ 32.387542] devres_release_group+0x319/0x3d0
[ 32.388162] i2c_device_remove+0x93/0x1f0
In the Linux kernel, the following vulnerability has been resolved:
usbnet: Fix linkwatch use-after-free on disconnect
usbnet uses the work usbnet_deferred_kevent() to perform tasks which may
sleep. On disconnect, completion of the work was originally awaited in
->ndo_stop(). But in 2003, that was moved to ->disconnect() by historic
commit "[PATCH] USB: usbnet, prevent exotic rtnl deadlock":
https://git.kernel.org/tglx/history/c/0f138bbfd83c
The change was made because back then, the kernel's workqueue
implementation did not allow waiting for a single work. One had to wait
for completion of *all* work by calling flush_scheduled_work(), and that
could deadlock when waiting for usbnet_deferred_kevent() with rtnl_mutex
held in ->ndo_stop().
The commit solved one problem but created another: It causes a
use-after-free in USB Ethernet drivers aqc111.c, asix_devices.c,
ax88179_178a.c, ch9200.c and smsc75xx.c:
* If the drivers receive a link change interrupt immediately before
disconnect, they raise EVENT_LINK_RESET in their (non-sleepable)
->status() callback and schedule usbnet_deferred_kevent().
* usbnet_deferred_kevent() invokes the driver's ->link_reset() callback,
which calls netif_carrier_{on,off}().
* That in turn schedules the work linkwatch_event().
Because usbnet_deferred_kevent() is awaited after unregister_netdev(),
netif_carrier_{on,off}() may operate on an unregistered netdev and
linkwatch_event() may run after free_netdev(), causing a use-after-free.
In 2010, usbnet was changed to only wait for a single instance of
usbnet_deferred_kevent() instead of *all* work by commit 23f333a2bfaf
("drivers/net: don't use flush_scheduled_work()").
Unfortunately the commit neglected to move the wait back to
->ndo_stop(). Rectify that omission at long last.
In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: display: Fix refcount leak bug
In omapdss_init_fbdev(), of_find_node_by_name() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
In the Linux kernel, the following vulnerability has been resolved:
ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
In pdata_quirks_init_clocks(), the loop contains
of_find_node_by_name() but without corresponding of_node_put().
In the Linux kernel, the following vulnerability has been resolved:
ext2: Add more validity checks for inode counts
Add checks verifying number of inodes stored in the superblock matches
the number computed from number of inodes per group. Also verify we have
at least one block worth of inodes per group. This prevents crashes on
corrupted filesystems.
In the Linux kernel, the following vulnerability has been resolved:
arm64: fix oops in concurrently setting insn_emulation sysctls
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing.
In the Linux kernel, the following vulnerability has been resolved:
ARM: bcm: Fix refcount leak in bcm_kona_smc_init
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
In the Linux kernel, the following vulnerability has been resolved:
meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.