Linux: >> Linux Kernel >> 6.1.59 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: wait barrier before returning discard request with REQ_NOWAIT
raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
jfs: reject on-disk inodes of an unsupported type
Syzbot has reported the following BUG:
kernel BUG at fs/inode.c:668!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
RIP: 0010:clear_inode+0x168/0x190
Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7
0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f
RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093
RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38
R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000
R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80
FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? clear_inode+0x168/0x190
? do_error_trap+0x1dc/0x2c0
? clear_inode+0x168/0x190
? __pfx_do_error_trap+0x10/0x10
? report_bug+0x3cd/0x500
? handle_invalid_op+0x34/0x40
? clear_inode+0x168/0x190
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? clear_inode+0x57/0x190
? clear_inode+0x167/0x190
? clear_inode+0x168/0x190
? clear_inode+0x167/0x190
jfs_evict_inode+0xb5/0x440
? __pfx_jfs_evict_inode+0x10/0x10
evict+0x4ea/0x9b0
? __pfx_evict+0x10/0x10
? iput+0x713/0xa50
txUpdateMap+0x931/0xb10
? __pfx_txUpdateMap+0x10/0x10
jfs_lazycommit+0x49a/0xb80
? _raw_spin_unlock_irqrestore+0x8f/0x140
? lockdep_hardirqs_on+0x99/0x150
? __pfx_jfs_lazycommit+0x10/0x10
? __pfx_default_wake_function+0x10/0x10
? __kthread_parkme+0x169/0x1d0
? __pfx_jfs_lazycommit+0x10/0x10
kthread+0x2f2/0x390
? __pfx_jfs_lazycommit+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4d/0x80
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
This happens when 'clear_inode()' makes an attempt to finalize an underlying
JFS inode of unknown type. According to JFS layout description from
https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to
15 are reserved for future extensions and should not be encountered on a valid
filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Clear table_sz when rproc_shutdown
There is case as below could trigger kernel dump:
Use U-Boot to start remote processor(rproc) with resource table
published to a fixed address by rproc. After Kernel boots up,
stop the rproc, load a new firmware which doesn't have resource table
,and start rproc.
When starting rproc with a firmware not have resource table,
`memcpy(loaded_table, rproc->cached_table, rproc->table_sz)` will
trigger dump, because rproc->cache_table is set to NULL during the last
stop operation, but rproc->table_sz is still valid.
This issue is found on i.MX8MP and i.MX9.
Dump as below:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __pi_memcpy_generic+0x110/0x22c
lr : rproc_start+0x88/0x1e0
Call trace:
__pi_memcpy_generic+0x110/0x22c (P)
rproc_boot+0x198/0x57c
state_store+0x40/0x104
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x120/0x1cc
vfs_write+0x240/0x378
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xcc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
Clear rproc->table_sz to address the issue.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use aead_request_free to match aead_request_alloc
Use aead_request_free() instead of kfree() to properly free memory
allocated by aead_request_alloc(). This ensures sensitive crypto data
is zeroed before being freed.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
net_sched: skbprio: Remove overly strict queue assertions
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix OOB read when checking dotdot dir
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
CVSS Score
7.1
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
sfc: fix NULL dereferences in ef100_process_design_param()
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix off-by-one error in build_prologue()
Vincent reported that running BPF progs with tailcalls on LoongArch
causes kernel hard lockup. Debugging the issues shows that the JITed
image missing a jirl instruction at the end of the epilogue.
There are two passes in JIT compiling, the first pass set the flags and
the second pass generates JIT code based on those flags. With BPF progs
mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the
first pass and then generates N+1 insns in the second pass. This makes
epilogue_offset off by one and we will jump to some unexpected insn and
cause lockup. Fix this by inserting a nop insn.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-18
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid panic once fallocation fails for pinfile
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2746!
CPU: 0 UID: 0 PID: 5323 Comm: syz.0.0 Not tainted 6.13.0-rc2-syzkaller-00018-g7cb1b4663150 #0
RIP: 0010:get_new_segment fs/f2fs/segment.c:2746 [inline]
RIP: 0010:new_curseg+0x1f52/0x1f70 fs/f2fs/segment.c:2876
Call Trace:
<TASK>
__allocate_new_segment+0x1ce/0x940 fs/f2fs/segment.c:3210
f2fs_allocate_new_section fs/f2fs/segment.c:3224 [inline]
f2fs_allocate_pinning_section+0xfa/0x4e0 fs/f2fs/segment.c:3238
f2fs_expand_inode_data+0x696/0xca0 fs/f2fs/file.c:1830
f2fs_fallocate+0x537/0xa10 fs/f2fs/file.c:1940
vfs_fallocate+0x569/0x6e0 fs/open.c:327
do_vfs_ioctl+0x258c/0x2e40 fs/ioctl.c:885
__do_sys_ioctl fs/ioctl.c:904 [inline]
__se_sys_ioctl+0x80/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent pinfile allocation may run out of free section, result in
panic in get_new_segment(), let's expand pin_sem lock coverage to
include f2fs_gc(), so that we can make sure to reclaim enough free
space for following allocation.
In addition, do below changes to enhance error path handling:
- call f2fs_bug_on() only in non-pinfile allocation path in
get_new_segment().
- call reset_curseg_fields() to reset all fields of curseg in
new_curseg()
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
dlm: prevent NPD when writing a positive value to event_done
do_uevent returns the value written to event_done. In case it is a
positive value, new_lockspace would undo all the work, and lockspace
would not be set. __dlm_new_lockspace, however, would treat that
positive value as a success due to commit 8511a2728ab8 ("dlm: fix use
count with multiple joins").
Down the line, device_create_lockspace would pass that NULL lockspace to
dlm_find_lockspace_local, leading to a NULL pointer dereference.
Treating such positive values as successes prevents the problem. Given
this has been broken for so long, this is unlikely to break userspace
expectations.
CVSS Score
5.5
EPSS Score
0.001
Published
2025-04-16