Linux: >> Linux Kernel >> 2.6.34.5 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
drm/panel: fix a possible null pointer dereference
In versatile_panel_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix a race condition of vram buffer unref in svm code
prange->svm_bo unref can happen in both mmu callback and a callback after
migrate to system ram. Both are async call in different tasks. Sync svm_bo
unref operation to avoid random "use-after-free".
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
drm/panel/panel-tpo-tpg110: fix a possible null pointer dereference
In tpg110_get_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate(). Add a check to avoid npd.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix possible out-of-bound read in ath12k_htt_pull_ppdu_stats()
len is extracted from HTT message and could be an unexpected value in
case errors happen, so add validation before using to avoid possible
out-of-bound read in the following message iteration and parsing.
The same issue also applies to ppdu_info->ppdu_stats.common.num_users,
so validate it before using too.
These are found during code review.
Compile test only.
CVSS Score
7.1
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
bpf: Detect IP == ksym.end as part of BPF program
Now that bpf_throw kfunc is the first such call instruction that has
noreturn semantics within the verifier, this also kicks in dead code
elimination in unprecedented ways. For one, any instruction following
a bpf_throw call will never be marked as seen. Moreover, if a callchain
ends up throwing, any instructions after the call instruction to the
eventually throwing subprog in callers will also never be marked as
seen.
The tempting way to fix this would be to emit extra 'int3' instructions
which bump the jited_len of a program, and ensure that during runtime
when a program throws, we can discover its boundaries even if the call
instruction to bpf_throw (or to subprogs that always throw) is emitted
as the final instruction in the program.
An example of such a program would be this:
do_something():
...
r0 = 0
exit
foo():
r1 = 0
call bpf_throw
r0 = 0
exit
bar(cond):
if r1 != 0 goto pc+2
call do_something
exit
call foo
r0 = 0 // Never seen by verifier
exit //
main(ctx):
r1 = ...
call bar
r0 = 0
exit
Here, if we do end up throwing, the stacktrace would be the following:
bpf_throw
foo
bar
main
In bar, the final instruction emitted will be the call to foo, as such,
the return address will be the subsequent instruction (which the JIT
emits as int3 on x86). This will end up lying outside the jited_len of
the program, thus, when unwinding, we will fail to discover the return
address as belonging to any program and end up in a panic due to the
unreliable stack unwinding of BPF programs that we never expect.
To remedy this case, make bpf_prog_ksym_find treat IP == ksym.end as
part of the BPF program, so that is_bpf_text_address returns true when
such a case occurs, and we are able to unwind reliably when the final
instruction ends up being a call instruction.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
cpu/hotplug: Don't offline the last non-isolated CPU
If a system has isolated CPUs via the "isolcpus=" command line parameter,
then an attempt to offline the last housekeeping CPU will result in a
WARN_ON() when rebuilding the scheduler domains and a subsequent panic due
to and unhandled empty CPU mas in partition_sched_domains_locked().
cpuset_hotplug_workfn()
rebuild_sched_domains_locked()
ndoms = generate_sched_domains(&doms, &attr);
cpumask_and(doms[0], top_cpuset.effective_cpus, housekeeping_cpumask(HK_FLAG_DOMAIN));
Thus results in an empty CPU mask which triggers the warning and then the
subsequent crash:
WARNING: CPU: 4 PID: 80 at kernel/sched/topology.c:2366 build_sched_domains+0x120c/0x1408
Call trace:
build_sched_domains+0x120c/0x1408
partition_sched_domains_locked+0x234/0x880
rebuild_sched_domains_locked+0x37c/0x798
rebuild_sched_domains+0x30/0x58
cpuset_hotplug_workfn+0x2a8/0x930
Unable to handle kernel paging request at virtual address fffe80027ab37080
partition_sched_domains_locked+0x318/0x880
rebuild_sched_domains_locked+0x37c/0x798
Aside of the resulting crash, it does not make any sense to offline the last
last housekeeping CPU.
Prevent this by masking out the non-housekeeping CPUs when selecting a
target CPU for initiating the CPU unplug operation via the work queue.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't return unset power in ieee80211_get_tx_power()
We can get a UBSAN warning if ieee80211_get_tx_power() returns the
INT_MIN value mac80211 internally uses for "unset power level".
UBSAN: signed-integer-overflow in net/wireless/nl80211.c:3816:5
-2147483648 * 100 cannot be represented in type 'int'
CPU: 0 PID: 20433 Comm: insmod Tainted: G WC OE
Call Trace:
dump_stack+0x74/0x92
ubsan_epilogue+0x9/0x50
handle_overflow+0x8d/0xd0
__ubsan_handle_mul_overflow+0xe/0x10
nl80211_send_iface+0x688/0x6b0 [cfg80211]
[...]
cfg80211_register_wdev+0x78/0xb0 [cfg80211]
cfg80211_netdev_notifier_call+0x200/0x620 [cfg80211]
[...]
ieee80211_if_add+0x60e/0x8f0 [mac80211]
ieee80211_register_hw+0xda5/0x1170 [mac80211]
In this case, simply return an error instead, to indicate
that no data is available.
CVSS Score
9.1
EPSS Score
0.001
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Add date->evt_skb is NULL check
fix crash because of null pointers
[ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8
[ 6104.969667] #PF: supervisor read access in kernel mode
[ 6104.969668] #PF: error_code(0x0000) - not-present page
[ 6104.969670] PGD 0 P4D 0
[ 6104.969673] Oops: 0000 [#1] SMP NOPTI
[ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb]
[ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246
[ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006
[ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000
[ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001
[ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0
[ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90
[ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000
[ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0
[ 6104.969701] PKRU: 55555554
[ 6104.969702] Call Trace:
[ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb]
[ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth]
[ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 6104.969753] rfkill_set_block+0x92/0x160
[ 6104.969755] rfkill_fop_write+0x136/0x1e0
[ 6104.969759] __vfs_write+0x18/0x40
[ 6104.969761] vfs_write+0xdf/0x1c0
[ 6104.969763] ksys_write+0xb1/0xe0
[ 6104.969765] __x64_sys_write+0x1a/0x20
[ 6104.969769] do_syscall_64+0x51/0x180
[ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 6104.969773] RIP: 0033:0x7f5a21f18fef
[ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
[ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef
[ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012
[ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017
[ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002
[ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
atl1c: Work around the DMA RX overflow issue
This is based on alx driver commit 881d0327db37 ("net: alx: Work around
the DMA RX overflow issue").
The alx and atl1c drivers had RX overflow error which was why a custom
allocator was created to avoid certain addresses. The simpler workaround
then created for alx driver, but not for atl1c due to lack of tester.
Instead of using a custom allocator, check the allocated skb address and
use skb_reserve() to move away from problematic 0x...fc0 address.
Tested on AR8131 on Acer 4540.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21
In the Linux kernel, the following vulnerability has been resolved:
scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()
fc_lport_ptp_setup() did not check the return value of fc_rport_create()
which can return NULL and would cause a NULL pointer dereference. Address
this issue by checking return value of fc_rport_create() and log error
message on fc_rport_create() failed.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-05-21