Linux: >> Linux Kernel >> 5.15.0-58 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table()
nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label
inside the for loop body. When the "last" helper saved in cb->args[1]
is deleted between dump rounds, every entry fails the (cur != last)
check, so cb->args[1] is never cleared. The for loop finishes with
cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back
into the loop body bypassing the bounds check, causing an 8-byte
out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize].
The 'goto restart' block was meant to re-traverse the current bucket
when "last" is no longer found, but it was placed after the for loop
instead of inside it. Move the block into the for loop body so that
the restart only occurs while cb->args[0] is still within bounds.
BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0
Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131
Call Trace:
nfnl_cthelper_dump_table+0x9f/0x1b0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
sock_recvmsg+0xde/0xf0
__sys_recvfrom+0x150/0x200
__x64_sys_recvfrom+0x76/0x90
do_syscall_64+0xc3/0x6e0
Allocated by task 1:
__kvmalloc_node_noprof+0x21b/0x700
nf_ct_alloc_hashtable+0x65/0xd0
nf_conntrack_helper_init+0x21/0x60
nf_conntrack_init_start+0x18d/0x300
nf_conntrack_standalone_init+0x12/0xc0
CVSS Score
7.1
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_queue: fix entry leak in bridge verdict error path
nfqnl_recv_verdict() calls find_dequeue_entry() to remove the queue
entry from the queue data structures, taking ownership of the entry.
For PF_BRIDGE packets, it then calls nfqa_parse_bridge() to parse VLAN
attributes. If nfqa_parse_bridge() returns an error (e.g. NFQA_VLAN
present but NFQA_VLAN_TCI missing), the function returns immediately
without freeing the dequeued entry or its sk_buff.
This leaks the nf_queue_entry, its associated sk_buff, and all held
references (net_device refcounts, struct net refcount). Repeated
triggering exhausts kernel memory.
Fix this by dropping the entry via nfqnl_reinject() with NF_DROP verdict
on the error path, consistent with other error handling in this file.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: guard option walkers against 1-byte tail reads
When the last byte of options is a non-single-byte option kind, walkers
that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end
of the option area.
Add an explicit i == optlen - 1 check before dereferencing op[i + 1]
in xt_tcpudp and xt_dccp option walkers.
CVSS Score
8.2
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()
In the drain loop, the local variable 'runtime' is reassigned to a
linked stream's runtime (runtime = s->runtime at line 2157). After
releasing the stream lock at line 2169, the code accesses
runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size
(lines 2170-2178) — all referencing the linked stream's runtime without
any lock or refcount protecting its lifetime.
A concurrent close() on the linked stream's fd triggers
snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private()
→ snd_pcm_unlink() → snd_pcm_detach_substream() → kfree(runtime).
No synchronization prevents kfree(runtime) from completing while the
drain path dereferences the stale pointer.
Fix by caching the needed runtime fields (no_period_wakeup, rate,
buffer_size) into local variables while still holding the stream lock,
and using the cached values after the lock is released.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e
driver")
Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")
Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of
unsigned in *_tx_map()") fixed the infinite loop, but introduced the
off-by-one error.
This issue may still exist in the igbvf driver, but I did not address it
in this patch.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts
The usbtmc driver accepts timeout values specified by the user in an
ioctl command, and uses these timeouts for some usb_bulk_msg() calls.
Since the user can specify arbitrarily long timeouts and
usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable()
instead to avoid the possibility of the user hanging a kernel thread
indefinitely.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
usb: yurex: fix race in probe
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces
The Scarlett2 mixer quirk in USB-audio driver may hit a NULL
dereference when a malformed USB descriptor is passed, since it
assumes the presence of an endpoint in the parsed interface in
scarlett2_find_fc_interface(), as reported by fuzzer.
For avoiding the NULL dereference, just add the sanity check of
bNumEndpoints and skip the invalid interface.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix i_nlink underrun during async unlink
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-08