Linux: >> Linux Kernel >> 5.10.253 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Set DMA segment size to avoid debug warnings
When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the
kernel occasionally reports a segment size mismatch. This is because
'max_seg_size' is not set. The kernel defaults to 64K. setting
'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()'
from complaining about the over-mapping of the V3D segment length.
DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device
claims to support [len=8290304] [max=65536]
WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388
CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1
Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_dma_map_sg+0x330/0x388
lr : debug_dma_map_sg+0x330/0x388
sp : ffff8000829a3ac0
x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000
x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000
x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002
x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff
x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573
x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000
x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c
x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001
x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280
Call trace:
debug_dma_map_sg+0x330/0x388
__dma_map_sg_attrs+0xc0/0x278
dma_map_sgtable+0x30/0x58
drm_gem_shmem_get_pages_sgt+0xb4/0x140
v3d_bo_create_finish+0x28/0x130 [v3d]
v3d_create_bo_ioctl+0x54/0x180 [v3d]
drm_ioctl_kernel+0xc8/0x140
drm_ioctl+0x2d4/0x4d8
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ext4: move ext4_percpu_param_init() before ext4_mb_init()
When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the
`DOUBLE_CHECK` macro defined, the following panic is triggered:
==================================================================
EXT4-fs error (device vdc): ext4_validate_block_bitmap:423:
comm mount: bg 0: bad block bitmap checksum
BUG: unable to handle page fault for address: ff110000fa2cc000
PGD 3e01067 P4D 3e02067 PUD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W
6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none)
RIP: 0010:percpu_counter_add_batch+0x13/0xa0
Call Trace:
<TASK>
ext4_mark_group_bitmap_corrupted+0xcb/0xe0
ext4_validate_block_bitmap+0x2a1/0x2f0
ext4_read_block_bitmap+0x33/0x50
mb_group_bb_bitmap_alloc+0x33/0x80
ext4_mb_add_groupinfo+0x190/0x250
ext4_mb_init_backend+0x87/0x290
ext4_mb_init+0x456/0x640
__ext4_fill_super+0x1072/0x1680
ext4_fill_super+0xd3/0x280
get_tree_bdev_flags+0x132/0x1d0
vfs_get_tree+0x29/0xd0
vfs_cmd_create+0x59/0xe0
__do_sys_fsconfig+0x4f6/0x6b0
do_syscall_64+0x50/0x1f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
This issue can be reproduced using the following commands:
mkfs.ext4 -F -q -b 1024 /dev/sda 5G
tune2fs -O quota,project /dev/sda
mount /dev/sda /tmp/test
With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads
and validates the block bitmap. When the validation fails,
ext4_mark_group_bitmap_corrupted() attempts to update
sbi->s_freeclusters_counter. However, this percpu_counter has not been
initialized yet at this point, which leads to the panic described above.
Fix this by moving the execution of ext4_percpu_param_init() to occur
before ext4_mb_init(), ensuring the per-CPU counters are initialized
before they are used.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()
rtw8822b_set_antenna() can be called from userspace when the chip is
powered off. In that case a WARNING is triggered in
rtw8822b_config_trx_mode() because trying to read the RF registers
when the chip is powered off returns an unexpected value.
Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when
the chip is powered on.
------------[ cut here ]------------
write RF mode table fail
WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021
RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
Call Trace:
<TASK>
rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b]
rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb]
ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3]
nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? netdev_run_todo+0x63/0x550
genl_family_rcv_msg_doit+0xfc/0x160
genl_rcv_msg+0x1aa/0x2b0
? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
? refill_obj_stock+0x12e/0x240
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? do_syscall_64+0x81/0x970
? ksys_read+0x73/0xf0
? do_syscall_64+0x81/0x970
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
xfrm: esp: avoid in-place decrypt on shared skb frags
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
CVSS Score
8.8
EPSS Score
0.175
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Add sanity check for OOB writes at silencing
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
md-cluster: fix NULL pointer dereference in process_metadata_update
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Flush exception handling work when RPM level is zero
Ensure that the exception event handling work is explicitly flushed during
suspend when the runtime power management level is set to UFS_PM_LVL_0.
When the RPM level is zero, the device power mode and link state both
remain active. Previously, the UFS core driver bypassed flushing exception
event handling jobs in this configuration. This created a race condition
where the driver could attempt to access the host controller to handle an
exception after the system had already entered a deep power-down state,
resulting in a system crash.
Explicitly flush this work and disable auto BKOPs before the suspend
callback proceeds. This guarantees that pending exception tasks complete
and prevents illegal hardware access during the power-down sequence.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
CVSS Score
7.5
EPSS Score
0.001
Published
2026-05-06