Linux: >> Linux Kernel >> 4.9.256 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
crypto: jitterentropy - replace long-held spinlock with mutex
jent_kcapi_random() serializes the shared jitterentropy state, but it
currently holds a spinlock across the jent_read_entropy() call. That
path performs expensive jitter collection and SHA3 conditioning, so
parallel readers can trigger stalls as contending waiters spin for
the same lock.
To prevent non-preemptible lock hold, replace rng->jent_lock with a
mutex so contended readers sleep instead of spinning on a shared lock
held across expensive entropy generation.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: handle forward allocation error
batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb
for each DHT candidate, but does not check the return value before passing
it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences
the skb unconditionally, so a failed allocation triggers a NULL pointer
dereference.
Skip forwarding to the current DHT candidate on allocation failure.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: clear current gateway during teardown
batadv_gw_node_free() removes the gateway list entries during mesh teardown,
but it does not clear the currently selected gateway. This leaves stale
gateway state behind across cleanup and can break a later mesh recreation.
Clear bat_priv->gw.curr_gw before walking the gateway list so the selected
gateway reference is dropped as part of teardown.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ipc: limit next_id allocation to the valid ID range
The checkpoint/restore sysctl path can request the next SysV IPC id
through ids->next_id. ipc_idr_alloc() currently forwards that request to
idr_alloc() with an open-ended upper bound.
If the valid tail of the SysV IPC id space is full, the allocation can
spill beyond ipc_mni. The returned SysV IPC id still uses the normal
index encoding, so later lookup and removal can target the wrong slot.
This leaves the real IDR entry behind and breaks the IDR state for the
object.
The bug is in ipc_idr_alloc() in the checkpoint/restore path.
1. ids->next_id is passed to:
idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...)
2. The zero upper bound makes the allocation effectively open-ended.
Once the valid SysV IPC tail is occupied, idr_alloc() can spill past
ipc_mni and allocate an entry beyond the valid IPC id range.
3. The new object id is still encoded with the narrower SysV IPC index
width:
new->id = (new->seq << ipcmni_seq_shift()) + idx
4. Later removal goes through ipc_rmid(), which uses:
ipcid_to_idx(ipcp->id)
That truncates the real IDR index. An object actually stored at a
high index can then be removed as if it lived at a low in-range
index.
5. For shared memory, shm_destroy() frees the current object anyway, but
the real high IDR slot is left behind as a dangling pointer.
6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry
and dereferences freed memory.
Prevent this by bounding the requested allocation to ipc_mni so the
checkpoint/restore path fails once the valid range is exhausted.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: stop OGMv2 on disabled interface
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix fragment reassembly length accounting
batman-adv keeps a running payload length for queued fragments and uses it
to validate a fragment chain before reassembly.
That accounting currently allows the accumulated fragment length to be
truncated during updates. As a result, malformed fragment chains can
bypass the intended validation and drive reassembly with inconsistent
length state, leading to a local denial of service.
Fix the accounting by storing the accumulated length in a length-typed
field and rejecting update overflows before the existing validation logic
runs.
The fix was verified against the original reproducer and against valid
fragment reassembly paths.
CVSS Score
9.8
EPSS Score
0.005
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_hbh: reject oversized option lists
struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors,
but hbh_mt6_check() does not reject larger optsnr values supplied from
userspace.
Validate optsnr in the rule setup path so only match data that fits the
fixed-size opts array can be installed. This follows the existing xtables
pattern of rejecting invalid user-provided counts in checkentry() and
keeps the packet matching path unchanged.
`struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array,
where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible:
[ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29
[ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]'
CVSS Score
7.1
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
batman-adv: frag: disallow unicast fragment in fragment
batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a
BATADV_UNICAST_FRAG packet is received. Once all fragments are collected
and the packet is reassembled, batadv_recv_frag_packet() calls
batadv_batman_skb_recv() again to process the defragmented payload.
A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled
payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting).
Each nesting level recurses through batadv_batman_skb_recv() without bound,
growing the kernel stack until it is exhausted.
Since refragmentation or fragments in fragments are not actually allowed,
discard all packets which are still BATADV_UNICAST_FRAG packets after the
defragmentation process.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
sctp: diag: reject stale associations in dump_one path
The SCTP exact sock_diag lookup can hold a transport reference, block on
lock_sock(sk), and then resume after sctp_association_free() has marked
the association dead and freed its bind address list.
When that happens, inet_assoc_attr_size() and
inet_diag_msg_sctpasoc_fill() can still dereference association state
that is no longer valid for reporting. In particular,
inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a
real sctp_sockaddr_entry and trigger an out-of-bounds read from
unrelated association memory.
Reject the association after taking the socket lock if it has been
reaped or detached from the endpoint, and report the lookup as stale.
This keeps the exact dump-one path from formatting torn association
state.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-06-24