Linux: >> Linux Kernel >> 5.13.16 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Add fallback to default RSR for S/PDIF
spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR
for the MSR calculation loop. However, pll_rate is only updated in
atc_pll_init() and not in hw_pll_init(), so it remains 0 after the
card init.
When spdif_passthru_playback_setup() skips atc_pll_init() for
32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin
indefinitely.
Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects
the hardware state, since hw_card_init() already configures the PLL
to the default RSR.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix soft lockup in retry_aligned_read()
When retry_aligned_read() encounters an overlapped stripe, it releases
the stripe via raid5_release_stripe() which puts it on the lockless
released_stripes llist. In the next raid5d loop iteration,
release_stripe_list() drains the stripe onto handle_list (since
STRIPE_HANDLE is set by the original IO), but retry_aligned_read()
runs before handle_active_stripes() and removes the stripe from
handle_list via find_get_stripe() -> list_del_init(). This prevents
handle_stripe() from ever processing the stripe to resolve the
overlap, causing an infinite loop and soft lockup.
Fix this by using __release_stripe() with temp_inactive_list instead
of raid5_release_stripe() in the failure path, so the stripe does not
go through the released_stripes llist. This allows raid5d to break out
of its loop, and the overlap will be resolved when the stripe is
eventually processed by handle_stripe().
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
ceph: only d_add() negative dentries when they are unhashed
Ceph can call d_add(dentry, NULL) on a negative dentry that is already
present in the primary dcache hash.
In the current VFS that is not safe. d_add() goes through __d_add()
to __d_rehash(), which unconditionally reinserts dentry->d_hash into
the hlist_bl bucket. If the dentry is already hashed, reinserting the
same node can corrupt the bucket, including creating a self-loop.
Once that happens, __d_lookup() can spin forever in the hlist_bl walk,
typically looping only on the d_name.hash mismatch check and
eventually triggering RCU stall reports like this one:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829
rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192)
CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023
RIP: 0010:__d_lookup+0x46/0xb0
Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f
RSP: 0018:ff745a70c8253898 EFLAGS: 00000282
RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966
RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0
RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89
R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0
R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f
FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0
PKRU: 55555554
Call Trace:
<TASK>
lookup_fast+0x9f/0x100
walk_component+0x1f/0x150
link_path_walk+0x20e/0x3d0
path_lookupat+0x68/0x180
filename_lookup+0xdc/0x1e0
vfs_statx+0x6c/0x140
vfs_fstatat+0x67/0xa0
__do_sys_newfstatat+0x24/0x60
do_syscall_64+0x6a/0x230
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is reachable with reused cached negative dentries. A Ceph lookup
or atomic_open can be handed a negative dentry that is already hashed,
and fs/ceph/dir.c then hits one of two paths that incorrectly assume
"negative" also means "unhashed":
- ceph_finish_lookup():
MDS reply is -ENOENT with no trace
-> d_add(dentry, NULL)
- ceph_lookup():
local ENOENT fast path for a complete directory with shared caps
-> d_add(dentry, NULL)
Both paths can therefore re-add an already-hashed negative dentry.
Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only
calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn)
is true.
Fix both fs/ceph/dir.c sites the same way: only call d_add() for a
negative dentry when it is actually unhashed. If the negative dentry
is already hashed, leave it in place and reuse it as-is.
This preserves the existing behavior for unhashed dentries while
avoiding d_hash list corruption for reused hashed negatives.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix MR cleanup on copy error
__rds_rdma_map() hands sg/pages ownership to the transport after
get_mr() succeeds. If copying the generated cookie back to user space
fails after that point, the error path must not free those resources
again before dropping the MR reference.
Remove the duplicate unpin/free from the put_user() failure branch so
that MR teardown is handled only through the existing final cleanup
path.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged.
CVSS Score
8.2
EPSS Score
0.004
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye().
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
rxe_rcv() currently checks only that the incoming packet is at least
header_size(pkt) bytes long before payload_size() is used.
However, payload_size() subtracts both the attacker-controlled BTH pad
field and RXE_ICRC_SIZE from pkt->paylen:
payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt)
- RXE_ICRC_SIZE
This means a short packet can still make payload_size() underflow even
if it includes enough bytes for the fixed headers. Simply requiring
header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a
packet with a forged non-zero BTH pad can still leave payload_size()
negative and pass an underflowed value to later receive-path users.
Fix this by validating pkt->paylen against the full minimum length
required by payload_size(): header_size(pkt) + bth_pad(pkt) +
RXE_ICRC_SIZE.
CVSS Score
9.1
EPSS Score
0.005
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27
In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Triple fault if restore host CR3 fails on nested #VMEXIT
If loading L1's CR3 fails on a nested #VMEXIT, nested_svm_vmexit()
returns an error code that is ignored by most callers, and continues to
run L1 with corrupted state. A sane recovery is not possible in this
case, and HW behavior is to cause a shutdown. Inject a triple fault
instead, and do not return early from nested_svm_vmexit(). Continue
cleaning up the vCPU state (e.g. clear pending exceptions), to handle
the failure as gracefully as possible.
From the APM:
Upon #VMEXIT, the processor performs the following actions in order to
return to the host execution context:
...
if (illegal host state loaded, or exception while loading host state)
shutdown
else
execute first host instruction following the VMRUN
Remove the return value of nested_svm_vmexit(), which is mostly
unchecked anyway.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-05-27