Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 4.20.7  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check for station first in client probe When probing a client, first check if we have it, and then check for the channel context, otherwise you can trigger the warning there easily by probing when the AP isn't even started yet. Since a client existing means the AP is also operating, we can then keep the warning. Also simplify the moved code a bit.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't trust firmware n_channels If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should be doing it correctly, so check more strictly.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but set dev->kobj.parent = NULL ... glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto //"Error" label ... cleanup_glue_dir() //becaues glue_dir is NULL, not call //kobject_put() The preceding problem may cause insmod mac80211_hwsim.ko to failed. sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim' Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x224/0x280 kobject_add_internal+0x2aa/0x880 kobject_add+0x135/0x1a0 get_device_parent+0x3d7/0x590 device_add+0x2aa/0x1cb0 device_create_groups_vargs+0x1eb/0x260 device_create+0xdc/0x110 mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim] init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim] do_one_initcall+0x10f/0x630 do_init_module+0x19f/0x5e0 load_module+0x64b7/0x6eb0 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to register things with the same name in the same directory.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: null_blk: Always check queue mode setting from configfs Make sure to check device queue mode in the null_validate_conf() and return error for NULL_Q_RQ as we don't allow legacy I/O path, without this patch we get OOPs when queue mode is set to 1 from configfs, following are repro steps :- modprobe null_blk nr_devices=0 mkdir config/nullb/nullb0 echo 1 > config/nullb/nullb0/memory_backed echo 4096 > config/nullb/nullb0/blocksize echo 20480 > config/nullb/nullb0/size echo 1 > config/nullb/nullb0/queue_mode echo 1 > config/nullb/nullb0/power Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null) due to oops @ 0xffffffffc041c329 CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk] Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20 RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00 RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002 R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740 FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0 DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> nullb_device_power_store+0xd1/0x120 [null_blk] configfs_write_iter+0xb4/0x120 vfs_write+0x2ba/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fd4460c57a7 Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7 RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001 RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0 R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002 R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700 </TASK>
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: spi: qup: Don't skip cleanup in remove's error path Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: don't leak memory if dev_set_name() fails When dev_set_name() fails, zcdn_create() doesn't free the newly allocated resources. Do it.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject auth/assoc to AP with our address If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy For some reason, the driver adding support for Exynos5420 MIPI phy back in 2016 wasn't used on Exynos5420, which caused a kernel panic. Add the proper compatible for it.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04
In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Add a check for oversized packets Occasionnaly we may get oversized packets from the hardware which exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early check which drops the packet to avoid invoking skb_over_panic() and move on to processing the next packet.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-04


Contact Us

Shodan ® - All rights reserved