Linux: >> Linux Kernel >> 2.6.31.1 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Use disable_delayed_work_sync
This makes use of disable_delayed_work_sync instead
cancel_delayed_work_sync as it not only cancel the ongoing work but also
disables new submit which is disarable since the object holding the work
is about to be freed.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
This patch fixes a NULL pointer dereference bug in brcmfmac that occurs
when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs
are sent from the pkt queue.
The problem is the number of entries in the pre-allocated sgtable, it is
nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1.
Given the default [rt]xglom_size=32 it's actually 35 which is too small.
Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB
is added for each original SKB if tailroom isn't enough to hold tail_pad.
At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop"
in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return
NULL and this causes the oops.
The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle
the worst-case.
Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464
additional bytes of memory.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
jfs: add a check to prevent array-index-out-of-bounds in dbAdjTree
When the value of lp is 0 at the beginning of the for loop, it will
become negative in the next assignment and we should bail out.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds in jfs_readdir
The stbl might contain some invalid values. Added a check to
return error code in that case.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
leds: class: Protect brightness_show() with led_cdev->led_access mutex
There is NULL pointer issue observed if from Process A where hid device
being added which results in adding a led_cdev addition and later a
another call to access of led_cdev attribute from Process B can result
in NULL pointer issue.
Use mutex led_cdev->led_access to protect access to led->cdev and its
attribute inside brightness_show() and max_brightness_show() and also
update the comment for mutex that it should be used to protect the led
class device fields.
Process A Process B
kthread+0x114
worker_thread+0x244
process_scheduled_works+0x248
uhid_device_add_worker+0x24
hid_add_device+0x120
device_add+0x268
bus_probe_device+0x94
device_initial_probe+0x14
__device_attach+0xfc
bus_for_each_drv+0x10c
__device_attach_driver+0x14c
driver_probe_device+0x3c
__driver_probe_device+0xa0
really_probe+0x190
hid_device_probe+0x130
ps_probe+0x990
ps_led_register+0x94
devm_led_classdev_register_ext+0x58
led_classdev_register_ext+0x1f8
device_create_with_groups+0x48
device_create_groups_vargs+0xc8
device_add+0x244
kobject_uevent+0x14
kobject_uevent_env[jt]+0x224
mutex_unlock[jt]+0xc4
__mutex_unlock_slowpath+0xd4
wake_up_q+0x70
try_to_wake_up[jt]+0x48c
preempt_schedule_common+0x28
__schedule+0x628
__switch_to+0x174
el0t_64_sync+0x1a8/0x1ac
el0t_64_sync_handler+0x68/0xbc
el0_svc+0x38/0x68
do_el0_svc+0x1c/0x28
el0_svc_common+0x80/0xe0
invoke_syscall+0x58/0x114
__arm64_sys_read+0x1c/0x2c
ksys_read+0x78/0xe8
vfs_read+0x1e0/0x2c8
kernfs_fop_read_iter+0x68/0x1b4
seq_read_iter+0x158/0x4ec
kernfs_seq_show+0x44/0x54
sysfs_kf_seq_show+0xb4/0x130
dev_attr_show+0x38/0x74
brightness_show+0x20/0x4c
dualshock4_led_get_brightness+0xc/0x74
[ 3313.874295][ T4013] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060
[ 3313.874301][ T4013] Mem abort info:
[ 3313.874303][ T4013] ESR = 0x0000000096000006
[ 3313.874305][ T4013] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3313.874307][ T4013] SET = 0, FnV = 0
[ 3313.874309][ T4013] EA = 0, S1PTW = 0
[ 3313.874311][ T4013] FSC = 0x06: level 2 translation fault
[ 3313.874313][ T4013] Data abort info:
[ 3313.874314][ T4013] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 3313.874316][ T4013] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 3313.874318][ T4013] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 3313.874320][ T4013] user pgtable: 4k pages, 39-bit VAs, pgdp=00000008f2b0a000
..
[ 3313.874332][ T4013] Dumping ftrace buffer:
[ 3313.874334][ T4013] (ftrace buffer empty)
..
..
[ dd3313.874639][ T4013] CPU: 6 PID: 4013 Comm: InputReader
[ 3313.874648][ T4013] pc : dualshock4_led_get_brightness+0xc/0x74
[ 3313.874653][ T4013] lr : led_update_brightness+0x38/0x60
[ 3313.874656][ T4013] sp : ffffffc0b910bbd0
..
..
[ 3313.874685][ T4013] Call trace:
[ 3313.874687][ T4013] dualshock4_led_get_brightness+0xc/0x74
[ 3313.874690][ T4013] brightness_show+0x20/0x4c
[ 3313.874692][ T4013] dev_attr_show+0x38/0x74
[ 3313.874696][ T4013] sysfs_kf_seq_show+0xb4/0x130
[ 3313.874700][ T4013] kernfs_seq_show+0x44/0x54
[ 3313.874703][ T4013] seq_read_iter+0x158/0x4ec
[ 3313.874705][ T4013] kernfs_fop_read_iter+0x68/0x1b4
[ 3313.874708][ T4013] vfs_read+0x1e0/0x2c8
[ 3313.874711][ T4013] ksys_read+0x78/0xe8
[ 3313.874714][ T4013] __arm64_sys_read+0x1c/0x2c
[ 3313.874718][ T4013] invoke_syscall+0x58/0x114
[ 3313.874721][ T4013] el0_svc_common+0x80/0xe0
[ 3313.874724][ T4013] do_el0_svc+0x1c/0x28
[ 3313.874727][ T4013] el0_svc+0x38/0x68
[ 3313.874730][ T4013] el0t_64_sync_handler+0x68/0xbc
[ 3313.874732][ T4013] el0t_64_sync+0x1a8/0x1ac
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
mm/slub: Avoid list corruption when removing a slab from the full list
Boot with slub_debug=UFPZ.
If allocated object failed in alloc_consistency_checks, all objects of
the slab will be marked as used, and then the slab will be removed from
the partial list.
When an object belonging to the slab got freed later, the remove_full()
function is called. Because the slab is neither on the partial list nor
on the full list, it eventually lead to a list corruption (actually a
list poison being detected).
So we need to mark and isolate the slab page with metadata corruption,
do not put it back in circulation.
Because the debug caches avoid all the fastpaths, reusing the frozen bit
to mark slab page with metadata corruption seems to be fine.
[ 4277.385669] list_del corruption, ffffea00044b3e50->next is LIST_POISON1 (dead000000000100)
[ 4277.387023] ------------[ cut here ]------------
[ 4277.387880] kernel BUG at lib/list_debug.c:56!
[ 4277.388680] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 4277.389562] CPU: 5 PID: 90 Comm: kworker/5:1 Kdump: loaded Tainted: G OE 6.6.1-1 #1
[ 4277.392113] Workqueue: xfs-inodegc/vda1 xfs_inodegc_worker [xfs]
[ 4277.393551] RIP: 0010:__list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.394518] Code: 48 91 82 e8 37 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 28 49 91 82 e8 26 f9 9a ff 0f 0b 48 89 fe 48 c7 c7 58 49 91
[ 4277.397292] RSP: 0018:ffffc90000333b38 EFLAGS: 00010082
[ 4277.398202] RAX: 000000000000004e RBX: ffffea00044b3e50 RCX: 0000000000000000
[ 4277.399340] RDX: 0000000000000002 RSI: ffffffff828f8715 RDI: 00000000ffffffff
[ 4277.400545] RBP: ffffea00044b3e40 R08: 0000000000000000 R09: ffffc900003339f0
[ 4277.401710] R10: 0000000000000003 R11: ffffffff82d44088 R12: ffff888112cf9910
[ 4277.402887] R13: 0000000000000001 R14: 0000000000000001 R15: ffff8881000424c0
[ 4277.404049] FS: 0000000000000000(0000) GS:ffff88842fd40000(0000) knlGS:0000000000000000
[ 4277.405357] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4277.406389] CR2: 00007f2ad0b24000 CR3: 0000000102a3a006 CR4: 00000000007706e0
[ 4277.407589] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4277.408780] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4277.410000] PKRU: 55555554
[ 4277.410645] Call Trace:
[ 4277.411234] <TASK>
[ 4277.411777] ? die+0x32/0x80
[ 4277.412439] ? do_trap+0xd6/0x100
[ 4277.413150] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.414158] ? do_error_trap+0x6a/0x90
[ 4277.414948] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.415915] ? exc_invalid_op+0x4c/0x60
[ 4277.416710] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.417675] ? asm_exc_invalid_op+0x16/0x20
[ 4277.418482] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.419466] ? __list_del_entry_valid_or_report+0x7b/0xc0
[ 4277.420410] free_to_partial_list+0x515/0x5e0
[ 4277.421242] ? xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.422298] xfs_iext_remove+0x41a/0xa10 [xfs]
[ 4277.423316] ? xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.424383] xfs_bmap_del_extent_delay+0x4fe/0x7d0 [xfs]
[ 4277.425490] __xfs_bunmapi+0x50d/0x840 [xfs]
[ 4277.426445] xfs_itruncate_extents_flags+0x13a/0x490 [xfs]
[ 4277.427553] xfs_inactive_truncate+0xa3/0x120 [xfs]
[ 4277.428567] xfs_inactive+0x22d/0x290 [xfs]
[ 4277.429500] xfs_inodegc_worker+0xb4/0x1a0 [xfs]
[ 4277.430479] process_one_work+0x171/0x340
[ 4277.431227] worker_thread+0x277/0x390
[ 4277.431962] ? __pfx_worker_thread+0x10/0x10
[ 4277.432752] kthread+0xf0/0x120
[ 4277.433382] ? __pfx_kthread+0x10/0x10
[ 4277.434134] ret_from_fork+0x2d/0x50
[ 4277.434837] ? __pfx_kthread+0x10/0x10
[ 4277.435566] ret_from_fork_asm+0x1b/0x30
[ 4277.436280] </TASK>
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
ovl: Filter invalid inodes with missing lookup function
Add a check to the ovl_dentry_weird() function to prevent the
processing of directory inodes that lack the lookup function.
This is important because such inodes can cause errors in overlayfs
when passed to the lowerstack.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix usage slab after free
[ +0.000021] BUG: KASAN: slab-use-after-free in drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000027] Read of size 8 at addr ffff8881b8605f88 by task amd_pci_unplug/2147
[ +0.000023] CPU: 6 PID: 2147 Comm: amd_pci_unplug Not tainted 6.10.0+ #1
[ +0.000016] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[ +0.000016] Call Trace:
[ +0.000008] <TASK>
[ +0.000009] dump_stack_lvl+0x76/0xa0
[ +0.000017] print_report+0xce/0x5f0
[ +0.000017] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] ? srso_return_thunk+0x5/0x5f
[ +0.000015] ? kasan_complete_mode_report_info+0x72/0x200
[ +0.000016] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000019] kasan_report+0xbe/0x110
[ +0.000015] ? drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000023] __asan_report_load8_noabort+0x14/0x30
[ +0.000014] drm_sched_entity_flush+0x6cb/0x7a0 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000016] ? __pfx_drm_sched_entity_flush+0x10/0x10 [gpu_sched]
[ +0.000020] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? enable_work+0x124/0x220
[ +0.000015] ? __pfx_enable_work+0x10/0x10
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? free_large_kmalloc+0x85/0xf0
[ +0.000016] drm_sched_entity_destroy+0x18/0x30 [gpu_sched]
[ +0.000020] amdgpu_vce_sw_fini+0x55/0x170 [amdgpu]
[ +0.000735] ? __kasan_check_read+0x11/0x20
[ +0.000016] vce_v4_0_sw_fini+0x80/0x110 [amdgpu]
[ +0.000726] amdgpu_device_fini_sw+0x331/0xfc0 [amdgpu]
[ +0.000679] ? mutex_unlock+0x80/0xe0
[ +0.000017] ? __pfx_amdgpu_device_fini_sw+0x10/0x10 [amdgpu]
[ +0.000662] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? __kasan_check_write+0x14/0x30
[ +0.000013] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? mutex_unlock+0x80/0xe0
[ +0.000016] amdgpu_driver_release_kms+0x16/0x80 [amdgpu]
[ +0.000663] drm_minor_release+0xc9/0x140 [drm]
[ +0.000081] drm_release+0x1fd/0x390 [drm]
[ +0.000082] __fput+0x36c/0xad0
[ +0.000018] __fput_sync+0x3c/0x50
[ +0.000014] __x64_sys_close+0x7d/0xe0
[ +0.000014] x64_sys_call+0x1bc6/0x2680
[ +0.000014] do_syscall_64+0x70/0x130
[ +0.000014] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit_to_user_mode+0x60/0x190
[ +0.000015] ? srso_return_thunk+0x5/0x5f
[ +0.000014] ? irqentry_exit+0x43/0x50
[ +0.000012] ? srso_return_thunk+0x5/0x5f
[ +0.000013] ? exc_page_fault+0x7c/0x110
[ +0.000015] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000014] RIP: 0033:0x7ffff7b14f67
[ +0.000013] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff
[ +0.000026] RSP: 002b:00007fffffffe378 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[ +0.000019] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67
[ +0.000014] RDX: 0000000000000000 RSI: 00007ffff7f6f47a RDI: 0000000000000003
[ +0.000014] RBP: 00007fffffffe3a0 R08: 0000555555569890 R09: 0000000000000000
[ +0.000014] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8
[ +0.000013] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040
[ +0.000020] </TASK>
[ +0.000016] Allocated by task 383 on cpu 7 at 26.880319s:
[ +0.000014] kasan_save_stack+0x28/0x60
[ +0.000008] kasan_save_track+0x18/0x70
[ +0.000007] kasan_save_alloc_info+0x38/0x60
[ +0.000007] __kasan_kmalloc+0xc1/0xd0
[ +0.000007] kmalloc_trace_noprof+0x180/0x380
[ +0.000007] drm_sched_init+0x411/0xec0 [gpu_sched]
[ +0.000012] amdgpu_device_init+0x695f/0xa610 [amdgpu]
[ +0.000658] amdgpu_driver_load_kms+0x1a/0x120 [amdgpu]
[ +0.000662] amdgpu_pci_p
---truncated---
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
This patch also splits the code to the disconnect and the free phases;
the former is called immediately at the USB disconnect callback while
the latter is called from the card destructor.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed().
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27