Redhat: >> Enterprise Linux >> 10.0 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
drm/gem: Try to fix change_handle ioctl, attempt 4
[airlied: just added some comments on how to reenable]
On-list because the cat is out of the bag and we're clearly not good
enough to figure this out in private. The story thus far:
5e28b7b94408 ("drm: Set old handle to NULL before prime swap in
change_handle") tried to fix a race condition between the gem_close and
gem_change_handle ioctls, but got a few things wrong:
- There's a confusion with the local variable handle, which is actually
the new handle, and so the two-stage trick was actually applied to the
wrong idr slot. 7164d78559b0 ("drm/gem: fix race between
change_handle and handle_delete") tried to fix that by adding yet
another code block, but forgot to add the error handling. Which meant
we now have two paths, both kinda wrong.
- dc366607c41c ("drm: Replace old pointer to new idr") tried to apply
another fix, but inconsistently, again because of the handle confusion
- this would be the right fix (kinda, somewhat, it's a mess) if we'd
do the two-stage approach for the new handle. Except that wasn't the
intent of the original fix.
We also didn't have an igt merged for the original ioctl, which is a big
no-go. This was attempted to address off-list in the original bugfix,
and amd QA people claimed the bug was fixed now. Very clearly that's not
the case. Here's my attempt to sort this out:
- Rename the local variable to new_handle, the old aliasing with
args->handle is just too dangerously confusing.
- Merge the gem obj lookup with the two-stage idr_replace so that we
avoid getting ourselves confused there.
- This means we don't have a surplus temporary reference anymore, only
an inherited from the idr. A concurrent gem_close on the new_handle
could steal that. Fix that with the same two-stage approach
create_tail uses. This is a bit overkill as documented in the comment,
but I also don't trust my ability to understand this all correctly, so
go with the established pattern we have from other ioctls instead for
maximum paranoia.
- Adjust error paths. I've tried to make the error and success paths
common, because they are identical except for which handle is removed
and on which we call idr_replace to (re)install the object again. But
that made things messier to read, so I've left it at the more verbose
version, which unfortunately hides the symmetry in the entire code
flow a bit.
- While at it, also replace the 7 space indent with 1 tab.
And finally, because I flat out don't trust my abilities here at all
anymore:
- Disable the ioctl until we have the igt situation and everything else
sorted out on-list and with full consensus.
v2:
Sashiko noticed that I didn't handle the error path for idr_replace
correctly, it must be checked with IS_ERR_OR_NULL like in
gem_handle_delete. So yeah, definitely should just the existing paths
1:1 because this is endless amounts of tricky.
Also add the Fixes: line for the original ioctl, I forgot that too.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-25
In the Linux kernel, the following vulnerability has been resolved:
ice: fix double-free of tx_buf skb
If ice_tso() or ice_tx_csum() fail, the error path in
ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points
to it and is marked as valid (ICE_TX_BUF_SKB).
'next_to_use' remains unchanged, so the potential problem will
likely fix itself when the next packet is transmitted and the tx_buf
gets overwritten. But if there is no next packet and the interface is
brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf()
will find the tx_buf and free the skb for the second time.
The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error
path, so that ice_unmap_and_free_tx_buf().
Move the initialization of 'first' up, to ensure it's already valid in
case we hit the linearization error path.
The bug was spotted by AI while I had it looking for something else.
It also proposed an initial version of the patch.
I reproduced the bug and tested the fix by adding code to inject
failures, on a build with KASAN.
I looked for similar bugs in related Intel drivers and did not find any.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: remove sprintf usage
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..]
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix possible UAF in icmpv6_rcv()
Caching saddr and daddr before pskb_pull() is problematic
since skb->head can change.
Remove these temporary variables:
- We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr
when net_dbg_ratelimited() is called in the slow path.
- Avoid potential future misuse after pskb_pull() call.
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
A flaw was found in GStreamer's gst-plugins-bad package. When processing a specially crafted H.264 video file containing malformed MVC or SVC extension slice NAL units, a 1-byte heap out-of-bounds read can occur during parsing. This happens when the parser attempts to check slice boundary information without first verifying that the NAL unit contains enough data beyond the extension header. An attacker could exploit this by tricking a user into opening a malicious H.264 video file, potentially causing the application to crash or leak a single byte of heap memory.
CVSS Score
4.4
EPSS Score
0.001
Published
2026-06-23
Module: plugins/modules/keyring_info.py
CVSS 3.1: 5.5 MEDIUM — AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N
Issue: The module retrieves a passphrase from the OS native keyring (GNOME Keyring, macOS Keychain, Windows Credential Manager) and places it directly into result["passphrase"] with no output suppression, no no_log protection, and no documentation warning.
Root Cause:
Line 105 (protected): keyring_password=dict(type="str", required=True, no_log=True)
Line 127 (NOT protected): result["passphrase"] = passphrase
Observed Output:
{
"changed": false,
"passphrase": "MyMasterP@ssw0rd!SSH_Key_Secret"
}
Visible via register + debug:
{
"keyring_result": {
"changed": false,
"passphrase": "MyMasterP@ssw0rd!SSH_Key_Secret"
}
}
Impact:
Master passwords, SSH key passphrases and service credentials appear in all Ansible output
register: keyring_result followed by debug: var=keyring_result prints passphrase in full
Ansible fact caching backends (Redis, JSON file, memcached) may persist the passphrase
AWX/Tower job logs silently store the live credential
Fix:
module.exit_json(changed=False, passphrase=passphrase, _ansible_no_log=True)
Also add a documentation warning requiring callers to use no_log: true at the task level.
PoCs
Fig 1: PoC execution showing passphrase in plaintext output
Fig 2: Source code showing no_log=True on input (line 105) vs unprotected output (line 127)
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-23
A flaw was found in the community.general Ansible collection's nexmo module.
The module constructs HTTP requests to the Vonage/Nexmo SMS API by encoding
API credentials (api_key and api_secret) into URL query parameters and
sending them via GET requests. This causes credentials to be exposed in web
server access logs, proxy logs, HTTP Referer headers, and network monitoring
tools, despite the Ansible argument specification marking these parameters
as no_log. An attacker with access to any of these logging or monitoring
points can obtain the full API credentials and gain unauthorized access to
the victim's Vonage/Nexmo account.
CVSS Score
6.5
EPSS Score
0.004
Published
2026-06-23
A flaw was found in the GStreamer gst-plugins-bad package. When processing a malformed H.266/VVC video stream with a crafted aspect ratio indicator value, the H.266 parser performs an out-of-bounds read of up to 8 bytes from adjacent memory. This flaw allows an attacker to craft a malicious H.266 video file or stream that, when processed by a GStreamer-based application, could leak limited memory contents through video metadata, potentially exposing sensitive information from the application's address space.
CVSS Score
4.3
EPSS Score
0.003
Published
2026-06-23
An out-of-bounds read vulnerability exists in dnsmasq's find_soa() function in src/rfc1035.c. When parsing NS section records, extract_name() is called with extrabytes=0, failing to validate that 10 additional bytes exist for fixed-length DNS record fields. A remote attacker controlling a DNS zone can exploit this via a crafted NXDOMAIN response to cause a 10-byte heap out-of-bounds read, potentially accessing stale data from prior transactions.
CVSS Score
5.3
EPSS Score
0.004
Published
2026-06-23