Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 6.0.11  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask() If ipi_send_{mask|single}() is called with an invalid interrupt number, all the local variables there will be NULL. ipi_send_verify() which is invoked from these functions does verify its 'data' parameter, resulting in a kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets dereferenced. Add a missing NULL pointer check in ipi_send_verify()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one Eric Dumazet says: nf_conntrack_dccp_packet() has an unique: dh = skb_header_pointer(skb, dataoff, sizeof(_dh), &_dh); And nothing more is 'pulled' from the packet, depending on the content. dh->dccph_doff, and/or dh->dccph_x ...) So dccp_ack_seq() is happily reading stuff past the _dh buffer. BUG: KASAN: stack-out-of-bounds in nf_conntrack_dccp_packet+0x1134/0x11c0 Read of size 4 at addr ffff000128f66e0c by task syz-executor.2/29371 [..] Fix this by increasing the stack buffer to also include room for the extra sequence numbers and all the known dccp packet type headers, then pull again after the initial validation of the basic header. While at it, mark packets invalid that lack 48bit sequence bit but where RFC says the type MUST use them. Compile tested only. v2: first skb_header_pointer() now needs to adjust the size to only pull the generic header. (Eric) Heads-up: I intend to remove dccp conntrack support later this year.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: USB: chipidea: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() The function mpi3mr_get_all_tgt_info() has four issues: 1) It calculates valid entry length in alltgt_info assuming the header part of the struct mpi3mr_device_map_info would equal to sizeof(u32). The correct size is sizeof(u64). 2) When it calculates the valid entry length kern_entrylen, it excludes one entry by subtracting 1 from num_devices. 3) It copies num_device by calling memcpy(). Substitution is enough. 4) It does not specify the calculated length to sg_copy_from_buffer(). Instead, it specifies the payload length which is larger than the alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds". Fix the issues by using the correct header size, removing the subtraction from num_devices, replacing the memcpy() with substitution and specifying the correct length to sg_copy_from_buffer().
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: drop short frames While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: ext2/dax: Fix ext2_setsize when len is page aligned PAGE_ALIGN(x) macro gives the next highest value which is multiple of pagesize. But if x is already page aligned then it simply returns x. So, if x passed is 0 in dax_zero_range() function, that means the length gets passed as 0 to ->iomap_begin(). In ext2 it then calls ext2_get_blocks -> max_blocks as 0 and hits bug_on here in ext2_get_blocks(). BUG_ON(maxblocks == 0); Instead we should be calling dax_truncate_page() here which takes care of it. i.e. it only calls dax_zero_range if the offset is not page/block aligned. This can be easily triggered with following on fsdax mounted pmem device. dd if=/dev/zero of=file count=1 bs=512 truncate -s 0 file [79.525838] EXT2-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk [79.529376] ext2 filesystem being mounted at /mnt1/test supports timestamps until 2038 (0x7fffffff) [93.793207] ------------[ cut here ]------------ [93.795102] kernel BUG at fs/ext2/inode.c:637! [93.796904] invalid opcode: 0000 [#1] PREEMPT SMP PTI [93.798659] CPU: 0 PID: 1192 Comm: truncate Not tainted 6.3.0-rc2-xfstests-00056-g131086faa369 #139 [93.806459] RIP: 0010:ext2_get_blocks.constprop.0+0x524/0x610 <...> [93.835298] Call Trace: [93.836253] <TASK> [93.837103] ? lock_acquire+0xf8/0x110 [93.838479] ? d_lookup+0x69/0xd0 [93.839779] ext2_iomap_begin+0xa7/0x1c0 [93.841154] iomap_iter+0xc7/0x150 [93.842425] dax_zero_range+0x6e/0xa0 [93.843813] ext2_setsize+0x176/0x1b0 [93.845164] ext2_setattr+0x151/0x200 [93.846467] notify_change+0x341/0x4e0 [93.847805] ? lock_acquire+0xf8/0x110 [93.849143] ? do_truncate+0x74/0xe0 [93.850452] ? do_truncate+0x84/0xe0 [93.851739] do_truncate+0x84/0xe0 [93.852974] do_sys_ftruncate+0x2b4/0x2f0 [93.854404] do_syscall_64+0x3f/0x90 [93.855789] entry_SYSCALL_64_after_hwframe+0x72/0xdc
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Don't leak some plane state Apparently no one noticed that mdp5 plane states leak like a sieve ever since we introduced plane_state->commit refcount a few years ago in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.") Fix it by using the right helpers. Patchwork: https://patchwork.freedesktop.org/patch/551236/
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: powerpc: Don't try to copy PPR for task with NULL pt_regs powerpc sets up PF_KTHREAD and PF_IO_WORKER with a NULL pt_regs, which from my (arguably very short) checking is not commonly done for other archs. This is fine, except when PF_IO_WORKER's have been created and the task does something that causes a coredump to be generated. Then we get this crash: Kernel attempted to read user page (160) - exploit attempt? (uid: 1000) BUG: Kernel NULL pointer dereference on read at 0x00000160 Faulting instruction address: 0xc0000000000c3a60 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=32 NUMA pSeries Modules linked in: bochs drm_vram_helper drm_kms_helper xts binfmt_misc ecb ctr syscopyarea sysfillrect cbc sysimgblt drm_ttm_helper aes_generic ttm sg libaes evdev joydev virtio_balloon vmx_crypto gf128mul drm dm_mod fuse loop configfs drm_panel_orientation_quirks ip_tables x_tables autofs4 hid_generic usbhid hid xhci_pci xhci_hcd usbcore usb_common sd_mod CPU: 1 PID: 1982 Comm: ppc-crash Not tainted 6.3.0-rc2+ #88 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c0000000000c3a60 LR: c000000000039944 CTR: c0000000000398e0 REGS: c0000000041833b0 TRAP: 0300 Not tainted (6.3.0-rc2+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 88082828 XER: 200400f8 ... NIP memcpy_power7+0x200/0x7d0 LR ppr_get+0x64/0xb0 Call Trace: ppr_get+0x40/0xb0 (unreliable) __regset_get+0x180/0x1f0 regset_get_alloc+0x64/0x90 elf_core_dump+0xb98/0x1b60 do_coredump+0x1c34/0x24a0 get_signal+0x71c/0x1410 do_notify_resume+0x140/0x6f0 interrupt_exit_user_prepare_main+0x29c/0x320 interrupt_exit_user_prepare+0x6c/0xa0 interrupt_return_srr_user+0x8/0x138 Because ppr_get() is trying to copy from a PF_IO_WORKER with a NULL pt_regs. Check for a valid pt_regs in both ppc_get/ppr_set, and return an error if not set. The actual error value doesn't seem to be important here, so just pick -EINVAL. [mpe: Trim oops in change log, add Fixes & Cc stable]
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-16
In the Linux kernel, the following vulnerability has been resolved: net: fix net_dev_start_xmit trace event vs skb_transport_offset() After blamed commit, we must be more careful about using skb_transport_offset(), as reminded us by syzbot: WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline] WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Modules linked in: CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline] RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline] RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14 Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff RSP: 0018:ffffc900002bf700 EFLAGS: 00010293 RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280 RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67 R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline] [<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline] [<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660 [<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324 [<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline] [<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108 [<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 [<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline] [<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline] [<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701 [<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289 [<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-16


Contact Us

Shodan ® - All rights reserved