In the Linux kernel, the following vulnerability has been resolved:
media: mtk-vcodec: potential null pointer deference in SCP
The return value of devm_kzalloc() needs to be checked to avoid
NULL pointer deference. This is similar to CVE-2022-3113.
In the Linux kernel, the following vulnerability has been resolved:
drm/exynos/vidi: fix memory leak in .get_modes()
The duplicated EDID is never freed. Fix it.
In the Linux kernel, the following vulnerability has been resolved:
jfs: xattr: fix buffer overflow for invalid xattr
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log.
In the Linux kernel, the following vulnerability has been resolved:
ima: Fix use-after-free on a dentry's dname.name
->d_name.name can change on rename and the earlier value can be freed;
there are conditions sufficient to stabilize it (->d_lock on dentry,
->d_lock on its parent, ->i_rwsem exclusive on the parent's inode,
rename_lock), but none of those are met at any of the sites. Take a stable
snapshot of the name instead.
In the Linux kernel, the following vulnerability has been resolved:
greybus: Fix use-after-free bug in gb_interface_release due to race condition.
In gb_interface_create, &intf->mode_switch_completion is bound with
gb_interface_mode_switch_work. Then it will be started by
gb_interface_request_mode_switch. Here is the relevant code.
if (!queue_work(system_long_wq, &intf->mode_switch_work)) {
...
}
If we call gb_interface_release to make cleanup, there may be an
unfinished work. This function will call kfree to free the object
"intf". However, if gb_interface_mode_switch_work is scheduled to
run after kfree, it may cause use-after-free error as
gb_interface_mode_switch_work will use the object "intf".
The possible execution flow that may lead to the issue is as follows:
CPU0 CPU1
| gb_interface_create
| gb_interface_request_mode_switch
gb_interface_release |
kfree(intf) (free) |
| gb_interface_mode_switch_work
| mutex_lock(&intf->mutex) (use)
Fix it by canceling the work before kfree.
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix use-after-free due to race with dev replace
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix log recovery buffer allocation for the legacy h_size fixup
Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by
mkfs") added a fixup for incorrect h_size values used for the initial
umount record in old xfsprogs versions. Later commit 0c771b99d6c9
("xfs: clean up calculation of LR header blocks") cleaned up the log
reover buffer calculation, but stoped using the fixed up h_size value
to size the log recovery buffer, which can lead to an out of bounds
access when the incorrect h_size does not come from the old mkfs
tool, but a fuzzer.
Fix this by open coding xlog_logrec_hblks and taking the fixed h_size
into account for this calculation.
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-topology: Fix input format query of process modules without base extension
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
In the Linux kernel, the following vulnerability has been resolved:
mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL
commit a421ef303008 ("mm: allow !GFP_KERNEL allocations for kvmalloc")
includes support for __GFP_NOFAIL, but it presents a conflict with commit
dd544141b9eb ("vmalloc: back off when the current task is OOM-killed"). A
possible scenario is as follows:
process-a
__vmalloc_node_range(GFP_KERNEL | __GFP_NOFAIL)
__vmalloc_area_node()
vm_area_alloc_pages()
--> oom-killer send SIGKILL to process-a
if (fatal_signal_pending(current)) break;
--> return NULL;
To fix this, do not check fatal_signal_pending() in vm_area_alloc_pages()
if __GFP_NOFAIL set.
This issue occurred during OPLUS KASAN TEST. Below is part of the log
-> oom-killer sends signal to process
[65731.222840] [ T1308] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/apps/uid_10198,task=gs.intelligence,pid=32454,uid=10198
[65731.259685] [T32454] Call trace:
[65731.259698] [T32454] dump_backtrace+0xf4/0x118
[65731.259734] [T32454] show_stack+0x18/0x24
[65731.259756] [T32454] dump_stack_lvl+0x60/0x7c
[65731.259781] [T32454] dump_stack+0x18/0x38
[65731.259800] [T32454] mrdump_common_die+0x250/0x39c [mrdump]
[65731.259936] [T32454] ipanic_die+0x20/0x34 [mrdump]
[65731.260019] [T32454] atomic_notifier_call_chain+0xb4/0xfc
[65731.260047] [T32454] notify_die+0x114/0x198
[65731.260073] [T32454] die+0xf4/0x5b4
[65731.260098] [T32454] die_kernel_fault+0x80/0x98
[65731.260124] [T32454] __do_kernel_fault+0x160/0x2a8
[65731.260146] [T32454] do_bad_area+0x68/0x148
[65731.260174] [T32454] do_mem_abort+0x151c/0x1b34
[65731.260204] [T32454] el1_abort+0x3c/0x5c
[65731.260227] [T32454] el1h_64_sync_handler+0x54/0x90
[65731.260248] [T32454] el1h_64_sync+0x68/0x6c
[65731.260269] [T32454] z_erofs_decompress_queue+0x7f0/0x2258
--> be->decompressed_pages = kvcalloc(be->nr_pages, sizeof(struct page *), GFP_KERNEL | __GFP_NOFAIL);
kernel panic by NULL pointer dereference.
erofs assume kvmalloc with __GFP_NOFAIL never return NULL.
[65731.260293] [T32454] z_erofs_runqueue+0xf30/0x104c
[65731.260314] [T32454] z_erofs_readahead+0x4f0/0x968
[65731.260339] [T32454] read_pages+0x170/0xadc
[65731.260364] [T32454] page_cache_ra_unbounded+0x874/0xf30
[65731.260388] [T32454] page_cache_ra_order+0x24c/0x714
[65731.260411] [T32454] filemap_fault+0xbf0/0x1a74
[65731.260437] [T32454] __do_fault+0xd0/0x33c
[65731.260462] [T32454] handle_mm_fault+0xf74/0x3fe0
[65731.260486] [T32454] do_mem_abort+0x54c/0x1b34
[65731.260509] [T32454] el0_da+0x44/0x94
[65731.260531] [T32454] el0t_64_sync_handler+0x98/0xb4
[65731.260553] [T32454] el0t_64_sync+0x198/0x19c
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: WARN on vNMI + NMI window iff NMIs are outright masked
When requesting an NMI window, WARN on vNMI support being enabled if and
only if NMIs are actually masked, i.e. if the vCPU is already handling an
NMI. KVM's ABI for NMIs that arrive simultanesouly (from KVM's point of
view) is to inject one NMI and pend the other. When using vNMI, KVM pends
the second NMI simply by setting V_NMI_PENDING, and lets the CPU do the
rest (hardware automatically sets V_NMI_BLOCKING when an NMI is injected).
However, if KVM can't immediately inject an NMI, e.g. because the vCPU is
in an STI shadow or is running with GIF=0, then KVM will request an NMI
window and trigger the WARN (but still function correctly).
Whether or not the GIF=0 case makes sense is debatable, as the intent of
KVM's behavior is to provide functionality that is as close to real
hardware as possible. E.g. if two NMIs are sent in quick succession, the
probability of both NMIs arriving in an STI shadow is infinitesimally low
on real hardware, but significantly larger in a virtual environment, e.g.
if the vCPU is preempted in the STI shadow. For GIF=0, the argument isn't
as clear cut, because the window where two NMIs can collide is much larger
in bare metal (though still small).
That said, KVM should not have divergent behavior for the GIF=0 case based
on whether or not vNMI support is enabled. And KVM has allowed
simultaneous NMIs with GIF=0 for over a decade, since commit 7460fb4a3400
("KVM: Fix simultaneous NMIs"). I.e. KVM's GIF=0 handling shouldn't be
modified without a *really* good reason to do so, and if KVM's behavior
were to be modified, it should be done irrespective of vNMI support.