Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 6.0.11  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c ttm_bo_move_memcpy+0x3b4/0x460 [ttm] bo_driver_move+0x32/0x40 [drm_vram_helper] ttm_bo_handle_move_mem+0x118/0x200 [ttm] ttm_bo_validate+0xfa/0x220 [ttm] drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper] drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper] drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper] drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper] drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper] drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper] drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper] drm_atomic_commit+0x9c/0x160 [drm] drm_client_modeset_commit_atomic+0x33a/0x380 [drm] drm_client_modeset_commit_locked+0x77/0x220 [drm] drm_client_modeset_commit+0x31/0x60 [drm] __drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper] drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper] fbcon_init+0x316/0x790 visual_init+0x113/0x1d0 do_bind_con_driver+0x2a3/0x5c0 do_take_over_console+0xa9/0x270 do_fbcon_takeover+0xa1/0x170 do_fb_registered+0x2a8/0x340 fbcon_fb_registered+0x47/0xe0 register_framebuffer+0x294/0x4a0 __drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper] drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper] drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper] drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper] bochs_pci_probe+0x6ca/0x772 [bochs] local_pci_probe+0x4d/0xb0 pci_device_probe+0x119/0x320 really_probe+0x181/0x550 __driver_probe_device+0xc6/0x220 driver_probe_device+0x32/0x100 __driver_attach+0x195/0x200 bus_for_each_dev+0xbb/0x120 driver_attach+0x27/0x30 bus_add_driver+0x22e/0x2f0 driver_register+0xa9/0x190 __pci_register_driver+0x90/0xa0 bochs_pci_driver_init+0x52/0x1000 [bochs] do_one_initcall+0x76/0x430 do_init_module+0x61/0x28a load_module+0x1f82/0x2e50 __do_sys_finit_module+0xf8/0x190 __x64_sys_finit_module+0x23/0x30 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-18
In the Linux kernel, the following vulnerability has been resolved: orangefs: Fix kmemleak in orangefs_{kernel,client}_debug_init() When insert and remove the orangefs module, there are memory leaked as below: unreferenced object 0xffff88816b0cc000 (size 2048): comm "insmod", pid 783, jiffies 4294813439 (age 65.512s) hex dump (first 32 bytes): 6e 6f 6e 65 0a 00 00 00 00 00 00 00 00 00 00 00 none............ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000031ab7788>] kmalloc_trace+0x27/0xa0 [<000000005b405fee>] orangefs_debugfs_init.cold+0xaf/0x17f [<00000000e5a0085b>] 0xffffffffa02780f9 [<000000004232d9f7>] do_one_initcall+0x87/0x2a0 [<0000000054f22384>] do_init_module+0xdf/0x320 [<000000003263bdea>] load_module+0x2f98/0x3330 [<0000000052cd4153>] __do_sys_finit_module+0x113/0x1b0 [<00000000250ae02b>] do_syscall_64+0x35/0x80 [<00000000f11c03c7>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Use the golbal variable as the buffer rather than dynamic allocate to slove the problem.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-18
In the Linux kernel, the following vulnerability has been resolved: md: fix a crash in mempool_free There's a crash in mempool_free when running the lvm test shell/lvchange-rebuild-raid.sh. The reason for the crash is this: * super_written calls atomic_dec_and_test(&mddev->pending_writes) and wake_up(&mddev->sb_wait). Then it calls rdev_dec_pending(rdev, mddev) and bio_put(bio). * so, the process that waited on sb_wait and that is woken up is racing with bio_put(bio). * if the process wins the race, it calls bioset_exit before bio_put(bio) is executed. * bio_put(bio) attempts to free a bio into a destroyed bio set - causing a crash in mempool_free. We fix this bug by moving bio_put before atomic_dec_and_test. We also move rdev_dec_pending before atomic_dec_and_test as suggested by Neil Brown. The function md_end_flush has a similar bug - we must call bio_put before we decrement the number of in-progress bios. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 11557f0067 P4D 11557f0067 PUD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 0 PID: 73 Comm: kworker/0:1 Not tainted 6.1.0-rc3 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: kdelayd flush_expired_bios [dm_delay] RIP: 0010:mempool_free+0x47/0x80 Code: 48 89 ef 5b 5d ff e0 f3 c3 48 89 f7 e8 32 45 3f 00 48 63 53 08 48 89 c6 3b 53 04 7d 2d 48 8b 43 10 8d 4a 01 48 89 df 89 4b 08 <48> 89 2c d0 e8 b0 45 3f 00 48 8d 7b 30 5b 5d 31 c9 ba 01 00 00 00 RSP: 0018:ffff88910036bda8 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8891037b65d8 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff8891037b65d8 RBP: ffff8891447ba240 R08: 0000000000012908 R09: 00000000003d0900 R10: 0000000000000000 R11: 0000000000173544 R12: ffff889101a14000 R13: ffff8891562ac300 R14: ffff889102b41440 R15: ffffe8ffffa00d05 FS: 0000000000000000(0000) GS:ffff88942fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000001102e99000 CR4: 00000000000006b0 Call Trace: <TASK> clone_endio+0xf4/0x1c0 [dm_mod] clone_endio+0xf4/0x1c0 [dm_mod] __submit_bio+0x76/0x120 submit_bio_noacct_nocheck+0xb6/0x2a0 flush_expired_bios+0x28/0x2f [dm_delay] process_one_work+0x1b4/0x300 worker_thread+0x45/0x3e0 ? rescuer_thread+0x380/0x380 kthread+0xc2/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: brd dm_delay dm_raid dm_mod af_packet uvesafb cfbfillrect cfbimgblt cn cfbcopyarea fb font fbdev tun autofs4 binfmt_misc configfs ipv6 virtio_rng virtio_balloon rng_core virtio_net pcspkr net_failover failover qemu_fw_cfg button mousedev raid10 raid456 libcrc32c async_raid6_recov async_memcpy async_pq raid6_pq async_xor xor async_tx raid1 raid0 md_mod sd_mod t10_pi crc64_rocksoft crc64 virtio_scsi scsi_mod evdev psmouse bsg scsi_common [last unloaded: brd] CR2: 0000000000000000 ---[ end trace 0000000000000000 ]---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-18
In the Linux kernel, the following vulnerability has been resolved: padata: Always leave BHs disabled when running ->parallel() A deadlock can happen when an overloaded system runs ->parallel() in the context of the current task: padata_do_parallel ->parallel() pcrypt_aead_enc/dec padata_do_serial spin_lock(&reorder->lock) // BHs still enabled <interrupt> ... __do_softirq ... padata_do_serial spin_lock(&reorder->lock) It's a bug for BHs to be on in _do_serial as Steffen points out, so ensure they're off in the "current task" case like they are in padata_parallel_worker to avoid this situation.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-18
In the Linux kernel, the following vulnerability has been resolved: accel/habanalabs: fix mem leak in capture user mappings This commit fixes a memory leak caused when clearing the user_mappings info when a new context is opened immediately after user_mapping is captured and a hard reset is performed.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-17
In the Linux kernel, the following vulnerability has been resolved: tracing: Fix race issue between cpu buffer write and swap Warning happened in rb_end_commit() at code: if (RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))) WARNING: CPU: 0 PID: 139 at kernel/trace/ring_buffer.c:3142 rb_commit+0x402/0x4a0 Call Trace: ring_buffer_unlock_commit+0x42/0x250 trace_buffer_unlock_commit_regs+0x3b/0x250 trace_event_buffer_commit+0xe5/0x440 trace_event_buffer_reserve+0x11c/0x150 trace_event_raw_event_sched_switch+0x23c/0x2c0 __traceiter_sched_switch+0x59/0x80 __schedule+0x72b/0x1580 schedule+0x92/0x120 worker_thread+0xa0/0x6f0 It is because the race between writing event into cpu buffer and swapping cpu buffer through file per_cpu/cpu0/snapshot: Write on CPU 0 Swap buffer by per_cpu/cpu0/snapshot on CPU 1 -------- -------- tracing_snapshot_write() [...] ring_buffer_lock_reserve() cpu_buffer = buffer->buffers[cpu]; // 1. Suppose find 'cpu_buffer_a'; [...] rb_reserve_next_event() [...] ring_buffer_swap_cpu() if (local_read(&cpu_buffer_a->committing)) goto out_dec; if (local_read(&cpu_buffer_b->committing)) goto out_dec; buffer_a->buffers[cpu] = cpu_buffer_b; buffer_b->buffers[cpu] = cpu_buffer_a; // 2. cpu_buffer has swapped here. rb_start_commit(cpu_buffer); if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) { // 3. This check passed due to 'cpu_buffer->buffer' [...] // has not changed here. return NULL; } cpu_buffer_b->buffer = buffer_a; cpu_buffer_a->buffer = buffer_b; [...] // 4. Reserve event from 'cpu_buffer_a'. ring_buffer_unlock_commit() [...] cpu_buffer = buffer->buffers[cpu]; // 5. Now find 'cpu_buffer_b' !!! rb_commit(cpu_buffer) rb_end_commit() // 6. WARN for the wrong 'committing' state !!! Based on above analysis, we can easily reproduce by following testcase: ``` bash #!/bin/bash dmesg -n 7 sysctl -w kernel.panic_on_warn=1 TR=/sys/kernel/tracing echo 7 > ${TR}/buffer_size_kb echo "sched:sched_switch" > ${TR}/set_event while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & while [ true ]; do echo 1 > ${TR}/per_cpu/cpu0/snapshot done & ``` To fix it, IIUC, we can use smp_call_function_single() to do the swap on the target cpu where the buffer is located, so that above race would be avoided.
CVSS Score
4.7
EPSS Score
0.0
Published
2025-09-17
In the Linux kernel, the following vulnerability has been resolved: USB: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-17
In the Linux kernel, the following vulnerability has been resolved: LoongArch: mm: Add p?d_leaf() definitions When I do LTP test, LTP test case ksm06 caused panic at break_ksm_pmd_entry -> pmd_leaf (Huge page table but False) -> pte_present (panic) The reason is pmd_leaf() is not defined, So like commit 501b81046701 ("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for LoongArch.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-17
In the Linux kernel, the following vulnerability has been resolved: ip6mr: Fix skb_under_panic in ip6mr_cache_report() skbuff: skb_under_panic: text:ffffffff88771f69 len:56 put:-4 head:ffff88805f86a800 data:ffff887f5f86a850 tail:0x88 end:0x2c0 dev:pim6reg ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:192! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 22968 Comm: kworker/2:11 Not tainted 6.5.0-rc3-00044-g0a8db05b571a #236 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x152/0x1d0 Call Trace: <TASK> skb_push+0xc4/0xe0 ip6mr_cache_report+0xd69/0x19b0 reg_vif_xmit+0x406/0x690 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 vlan_dev_hard_start_xmit+0x3ab/0x5c0 dev_hard_start_xmit+0x17e/0x6e0 __dev_queue_xmit+0x2d6a/0x3d20 neigh_connected_output+0x3ed/0x570 ip6_finish_output2+0x5b5/0x1950 ip6_finish_output+0x693/0x11c0 ip6_output+0x24b/0x880 NF_HOOK.constprop.0+0xfd/0x530 ndisc_send_skb+0x9db/0x1400 ndisc_send_rs+0x12a/0x6c0 addrconf_dad_completed+0x3c9/0xea0 addrconf_dad_work+0x849/0x1420 process_one_work+0xa22/0x16e0 worker_thread+0x679/0x10c0 ret_from_fork+0x28/0x60 ret_from_fork_asm+0x11/0x20 When setup a vlan device on dev pim6reg, DAD ns packet may sent on reg_vif_xmit(). reg_vif_xmit() ip6mr_cache_report() skb_push(skb, -skb_network_offset(pkt));//skb_network_offset(pkt) is 4 And skb_push declared as: void *skb_push(struct sk_buff *skb, unsigned int len); skb->data -= len; //0xffff88805f86a84c - 0xfffffffc = 0xffff887f5f86a850 skb->data is set to 0xffff887f5f86a850, which is invalid mem addr, lead to skb_push() fails.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-17
In the Linux kernel, the following vulnerability has been resolved: block: be a bit more careful in checking for NULL bdev while polling Wei reports a crash with an application using polled IO: PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1 Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022 RIP: 0010:bio_poll+0x25/0x200 Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65 RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600 RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140 RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00 R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001 FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: iocb_bio_iopoll+0x1d/0x30 io_do_iopoll+0xac/0x250 __se_sys_io_uring_enter+0x3c5/0x5a0 ? __x64_sys_write+0x89/0xd0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x94f225d Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7 RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 which is due to bio->bi_bdev being NULL. This can happen if we have two tasks doing polled IO, and task B ends up completing IO from task A if they are sharing a poll queue. If task B completes the IO and puts the bio into our cache, then it can allocate that bio again before task A is done polling for it. As that would necessitate a preempt between the two tasks, it's enough to just be a bit more careful in checking for whether or not bio->bi_bdev is NULL.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-17


Contact Us

Shodan ® - All rights reserved