Linux: >> Linux Kernel >> 5.15.96 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: handle attr_set_size() errors when truncating files
If attr_set_size() fails while truncating down, the error is silently
ignored and the inode may be left in an inconsistent state.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
jfs: nlink overflow in jfs_rename
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit 145df52a8671 ("wifi: rtw89: Convert
rtw89_core_set_supported_band to use devm_*").
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
rpmsg: core: fix race in driver_override_show() and use core helper
The driver_override_show function reads the driver_override string
without holding the device_lock. However, the store function modifies
and frees the string while holding the device_lock. This creates a race
condition where the string can be freed by the store function while
being read by the show function, leading to a use-after-free.
To fix this, replace the rpmsg_string_attr macro with explicit show and
store functions. The new driver_override_store uses the standard
driver_set_override helper. Since the introduction of
driver_set_override, the comments in include/linux/rpmsg.h have stated
that this helper must be used to set or clear driver_override, but the
implementation was not updated until now.
Because driver_set_override modifies and frees the string while holding
the device_lock, the new driver_override_show now correctly holds the
device_lock during the read operation to prevent the race.
Additionally, since rpmsg_string_attr has only ever been used for
driver_override, removing the macro simplifies the code.
CVSS Score
4.7
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels
MHI stack offers the 'auto_queue' feature, which allows the MHI stack to
auto queue the buffers for the RX path (DL channel). Though this feature
simplifies the client driver design, it introduces race between the client
drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback'
for the DL channel may get called before the client driver is fully probed.
This means, by the time the dl_callback gets called, the client driver's
structures might not be initialized, leading to NULL ptr dereference.
Currently, the drivers have to workaround this issue by initializing the
internal structures before calling mhi_prepare_for_transfer_autoqueue().
But even so, there is a chance that the client driver's internal code path
may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is
called, leading to similar NULL ptr dereference. This issue has been
reported on the Qcom X1E80100 CRD machines affecting boot.
So to properly fix all these races, drop the MHI 'auto_queue' feature
altogether and let the client driver (QRTR) manage the RX buffers manually.
In the QRTR driver, queue the RX buffers based on the ring length during
probe and recycle the buffers in 'dl_callback' once they are consumed. This
also warrants removing the setting of 'auto_queue' flag from controller
drivers.
Currently, this 'auto_queue' feature is only enabled for IPCR DL channel.
So only the QRTR client driver requires the modification.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
wifi: wl1251: validate packet IDs before indexing tx_frames
wl1251_tx_packet_cb() uses the firmware completion ID directly to index
the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the
completion block, and the callback does not currently verify that it
fits the array before dereferencing it.
Reject completion IDs that fall outside wl->tx_frames[] and keep the
existing NULL check in the same guard. This keeps the fix local to the
trust boundary and avoids touching the rest of the completion flow.
CVSS Score
8.8
EPSS Score
0.002
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
New test case fails unexpectedly when avx2 matching functions are used.
The test first loads a ranomly generated pipapo set
with 'ipv4 . port' key, i.e. nft -f foo.
This works. Then, it reloads the set after a flush:
(echo flush set t s; cat foo) | nft -f -
This is expected to work, because its the same set after all and it was
already loaded once.
But with avx2, this fails: nft reports a clashing element.
The reported clash is of following form:
We successfully re-inserted
a . b
c . d
Then we try to insert a . d
avx2 finds the already existing a . d, which (due to 'flush set') is marked
as invalid in the new generation. It skips the element and moves to next.
Due to incorrect masking, the skip-step finds the next matching
element *only considering the first field*,
i.e. we return the already reinserted "a . b", even though the
last field is different and the entry should not have been matched.
No such error is reported for the generic c implementation (no avx2) or when
the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.
Bisection points to
7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection")
but that fix merely uncovers this bug.
Before this commit, the wrong element is returned, but erronously
reported as a full, identical duplicate.
The root-cause is too early return in the avx2 match functions.
When we process the last field, we should continue to process data
until the entire input size has been consumed to make sure no stale
bits remain in the map.
CVSS Score
9.4
EPSS Score
0.004
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
srcu: Use irq_work to start GP in tiny SRCU
Tiny SRCU's srcu_gp_start_if_needed() directly calls schedule_work(),
which acquires the workqueue pool->lock.
This causes a lockdep splat when call_srcu() is called with a scheduler
lock held, due to:
call_srcu() [holding pi_lock]
srcu_gp_start_if_needed()
schedule_work() -> pool->lock
workqueue_init() / create_worker() [holding pool->lock]
wake_up_process() -> try_to_wake_up() -> pi_lock
Also add irq_work_sync() to cleanup_srcu_struct() to prevent a
use-after-free if a queued irq_work fires after cleanup begins.
Tested with rcutorture SRCU-T and no lockdep warnings.
[ Thanks to Boqun for similar fix in patch "rcu: Use an intermediate irq_work
to start process_srcu()" ]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06