In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: Abort software beacon handling if disabled
A malicious USB device can send a WMI_SWBA_EVENTID event from an
ath9k_htc-managed device before beaconing has been enabled. This causes
a device-by-zero error in the driver, leading to either a crash or an
out of bounds read.
Prevent this by aborting the handling in ath9k_htc_swba() if beacons are
not enabled.
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: ufs: Fix a hang in the error handler
ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter
function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because
resuming involves submitting a SCSI command and ufshcd_queuecommand()
returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this
hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has
been called instead of before.
Backtrace:
__switch_to+0x174/0x338
__schedule+0x600/0x9e4
schedule+0x7c/0xe8
schedule_timeout+0xa4/0x1c8
io_schedule_timeout+0x48/0x70
wait_for_common_io+0xa8/0x160 //waiting on START_STOP
wait_for_completion_io_timeout+0x10/0x20
blk_execute_rq+0xe4/0x1e4
scsi_execute_cmd+0x108/0x244
ufshcd_set_dev_pwr_mode+0xe8/0x250
__ufshcd_wl_resume+0x94/0x354
ufshcd_wl_runtime_resume+0x3c/0x174
scsi_runtime_resume+0x64/0xa4
rpm_resume+0x15c/0xa1c
__pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing
ufshcd_err_handler+0x1a0/0xd08
process_one_work+0x174/0x808
worker_thread+0x15c/0x490
kthread+0xf4/0x1ec
ret_from_fork+0x10/0x20
[ bvanassche: rewrote patch description ]
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken
A SCO connection without the proper voice_setting can cause
the controller to lock up.
In the Linux kernel, the following vulnerability has been resolved:
VMCI: fix race between vmci_host_setup_notify and vmci_ctx_unset_notify
During our test, it is found that a warning can be trigger in try_grab_folio
as follow:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef)
RIP: 0010:try_grab_folio+0x106/0x130
Call Trace:
<TASK>
follow_huge_pmd+0x240/0x8e0
follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0
follow_pud_mask.constprop.0.isra.0+0x14a/0x170
follow_page_mask+0x1c2/0x1f0
__get_user_pages+0x176/0x950
__gup_longterm_locked+0x15b/0x1060
? gup_fast+0x120/0x1f0
gup_fast_fallback+0x17e/0x230
get_user_pages_fast+0x5f/0x80
vmci_host_unlocked_ioctl+0x21c/0xf80
RIP: 0033:0x54d2cd
---[ end trace 0000000000000000 ]---
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
cpu0 cpu1
vmci_host_do_set_notify
vmci_host_setup_notify
get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page);
lockless_pages_from_mm
gup_pgd_range
gup_huge_pmd // update &context->notify_page
vmci_host_do_set_notify
vmci_ctx_unset_notify
notify_page = context->notify_page;
if (notify_page)
put_page(notify_page); // page is freed
__gup_longterm_locked
__get_user_pages
follow_trans_huge_pmd
try_grab_folio // warn here
To slove this, use local variable page to make notify_page can be seen
after finish get_user_pages_fast.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill timer properly at removal
The USB-audio MIDI code initializes the timer, but in a rare case, the
driver might be freed without the disconnect call. This leaves the
timer in an active state while the assigned object is released via
snd_usbmidi_free(), which ends up with a kernel warning when the debug
configuration is enabled, as spotted by fuzzer.
For avoiding the problem, put timer_shutdown_sync() at
snd_usbmidi_free(), so that the timer can be killed properly.
While we're at it, replace the existing timer_delete_sync() at the
disconnect callback with timer_shutdown_sync(), too.
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: don't warn when if there is a FW error
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently.