Junos OS routing protocol daemon (RPD) process may crash and restart or may lead to remote code execution while processing specific BGP NOTIFICATION messages. By continuously sending crafted BGP NOTIFICATION messages, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Due to design improvements, this issue does not affect Junos OS 16.1R1, and all subsequent releases. This issue only affects the receiving BGP device and is non-transitive in nature. Affected releases are Juniper Networks Junos OS: 15.1F5 versions starting from 15.1F5-S7 and all subsequent releases; 15.1F6 versions starting from 15.1F6-S3 and later releases prior to 15.1F6-S10; 15.1F7 versions 15.1 versions starting from 15.1R5 and later releases, including the Service Releases based on 15.1R5 and on 15.1R6 prior to 15.1R6-S6 and 15.1R7;
Receipt of a specially crafted Connectionless Network Protocol (CLNP) datagram destined to an interface of a Junos OS device may result in a kernel crash or lead to remote code execution. Devices are only vulnerable to the specially crafted CLNP datagram if 'clns-routing' or ES-IS is explicitly configured. Devices with without CLNS enabled are not vulnerable to this issue. Devices with IS-IS configured on the interface are not vulnerable to this issue unless CLNS routing is also enabled. This issue only affects devices running Junos OS 15.1. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F5-S3, 15.1F6-S8, 15.1F7, 15.1R5; 15.1X49 versions prior to 15.1X49-D60; 15.1X53 versions prior to 15.1X53-D66, 15.1X53-D233, 15.1X53-D471. Earlier releases are unaffected by this vulnerability, and the issue has been resolved in Junos OS 16.1R1 and all subsequent releases.
A vulnerability in the Network Address Translation - Protocol Translation (NAT-PT) feature of Junos OS on SRX series devices may allow a certain valid IPv6 packet to crash the flowd daemon. Repeated crashes of the flowd daemon can result in an extended denial of service condition for the SRX device. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D72; 12.3X48 versions prior to 12.3X48-D55; 15.1X49 versions prior to 15.1X49-D90.
On SRX Series devices during compilation of IDP policies, an attacker sending specially crafted packets may be able to bypass firewall rules, leading to information disclosure which an attacker may use to gain control of the target device or other internal devices, systems or services protected by the SRX Series device. This issue only applies to devices where IDP policies are applied to one or more rules. Customers not using IDP policies are not affected. Depending on if the IDP updates are automatic or not, as well as the interval between available updates, an attacker may have more or less success in performing reconnaissance or bypass attacks on the victim SRX Series device or protected devices. ScreenOS with IDP is not vulnerable to this issue. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D60 on SRX; 12.3X48 versions prior to 12.3X48-D35 on SRX; 15.1X49 versions prior to 15.1X49-D60 on SRX.
A vulnerability in Junos OS SNMP MIB-II subagent daemon (mib2d) may allow a remote network based attacker to cause the mib2d process to crash resulting in a denial of service condition (DoS) for the SNMP subsystem. While a mib2d process crash can disrupt the network monitoring via SNMP, it does not impact routing, switching or firewall functionalities. SNMP is disabled by default on devices running Junos OS. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D76; 12.3 versions prior to 12.3R12-S7, 12.3R13; 12.3X48 versions prior to 12.3X48-D65; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D130; 15.1 versions prior to 15.1F2-S20, 15.1F6-S10, 15.1R7; 15.1X49 versions prior to 15.1X49-D130; 15.1X53 versions prior to 15.1X53-D233, 15.1X53-D471, 15.1X53-D472, 15.1X53-D58, 15.1X53-D66; 16.1 versions prior to 16.1R5-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.1X70 versions prior to 16.1X70-D10; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S6, 17.1R3;
Junos OS may be impacted by the receipt of a malformed BGP UPDATE which can lead to a routing process daemon (rpd) crash and restart. Receipt of a repeated malformed BGP UPDATEs can result in an extended denial of service condition for the device. This malformed BGP UPDATE does not propagate to other BGP peers. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1F6-S10, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D130 on SRX; 15.1X53 versions prior to 15.1X53-D66 on QFX10K; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S3, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S3, 17.1R3; 17.2 versions prior to 17.2R1-S3, 17.2R2-S1, 17.2R3; 17.2X75 versions prior to 17.2X75-D70; 13.2 versions above and including 13.2R1. Versions prior to 13.2R1 are not affected. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. No other Juniper Networks products or platforms are affected by this issue.
If all 64 digits of the connectivity association name (CKN) key or all 32 digits of the connectivity association key (CAK) key are not configured, all remaining digits will be auto-configured to 0. Hence, Juniper devices configured with short MacSec keys are at risk to an increased likelihood that an attacker will discover the secret passphrases configured for these keys through dictionary-based and brute-force-based attacks using spoofed packets. Affected releases are Juniper Networks Junos OS: 14.1 versions prior to 14.1R10, 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D100; 15.1X53 versions prior to 15.1X53-D59; 16.1 versions prior to 16.1R3-S8, 16.1R4-S8, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2; 17.1 versions prior to 17.1R2.
A Junos device with VPLS routing-instances configured on one or more interfaces may be susceptible to an mbuf leak when processing a specific MPLS packet. Approximately 1 mbuf is leaked per each packet processed. The number of mbufs is platform dependent. The following command provides the number of mbufs that are currently in use and maximum number of mbufs that can be allocated on a platform: > show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs it will become inaccessible and a restart will be required. This issue only affects end devices, transit devices are not affected. Affected releases are Juniper Networks Junos OS with VPLS configured running: 12.1X46 versions prior to 12.1X46-D76; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F2-S19, 15.1F6-S10, 15.1R4-S9, 15.1R5-S7, 15.1R6-S4, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 15.1X53 versions prior to 15.1X53-D66 on QFX10; 16.1 versions prior to 16.1R3-S8, 16.1R4-S6, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R1-S5, 17.2R2.
A specially crafted MPLS packet received or processed by the system, on an interface configured with MPLS, will store information in the system memory. Subsequently, if this stored information is accessed, this may result in a kernel crash leading to a denial of service. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71; 12.3 versions prior to 12.3R12-S7; 12.3X48 versions prior to 12.3X48-D55; 14.1 versions prior to 14.1R8-S5, 14.1R9; 14.1X53 versions prior to 14.1X53-D45, 14.1X53-D107; 14.2 versions prior to 14.2R7-S7, 14.2R8; 15.1 versions prior to 15.1F5-S8, 15.1F6-S8, 15.1R5-S6, 15.1R6-S3, 15.1R7; 15.1X49 versions prior to 15.1X49-D100; 15.1X53 versions prior to 15.1X53-D65, 15.1X53-D231; 16.1 versions prior to 16.1R3-S6, 16.1R4-S6, 16.1R5; 16.1X65 versions prior to 16.1X65-D45; 16.2 versions prior to 16.2R2-S1, 16.2R3; 17.1 versions prior to 17.1R2-S2, 17.1R3; 17.2 versions prior to 17.2R1-S3, 17.2R2; 17.2X75 versions prior to 17.2X75-D50. No other Juniper Networks products or platforms are affected by this issue.
A sustained sequence of different types of normal transit traffic can trigger a high CPU consumption denial of service condition in the Junos OS register and schedule software interrupt handler subsystem when a specific command is issued to the device. This affects one or more threads and conversely one or more running processes running on the system. Once this occurs, the high CPU event(s) affects either or both the forwarding and control plane. As a result of this condition the device can become inaccessible in either or both the control and forwarding plane and stops forwarding traffic until the device is rebooted. The issue will reoccur after reboot upon receiving further transit traffic. Score: 5.7 MEDIUM (CVSS:3.0/AV:A/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) For network designs utilizing layer 3 forwarding agents or other ARP through layer 3 technologies, the score is slightly higher. Score: 6.5 MEDIUM (CVSS:3.0/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H) If the following entry exists in the RE message logs then this may indicate the issue is present. This entry may or may not appear when this issue occurs. /kernel: Expensive timeout(9) function: Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D50; 12.3X48 versions prior to 12.3X48-D30; 12.3R versions prior to 12.3R12-S7; 14.1 versions prior to 14.1R8-S4, 14.1R9; 14.1X53 versions prior to 14.1X53-D30, 14.1X53-D34; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F6, 15.1R3; 15.1X49 versions prior to 15.1X49-D40; 15.1X53 versions prior to 15.1X53-D31, 15.1X53-D33, 15.1X53-D60. No other Juniper Networks products or platforms are affected by this issue.