Linux: >> Linux Kernel >> 5.4.265 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
drm/ioc32: stop speculation on the drm_compat_ioctl path
The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (occ) Fix division by zero in occ_show_power_1()
In occ_show_power_1() case 1, the accumulator is divided by
update_tag without checking for zero. If no samples have been
collected yet (e.g. during early boot when the sensor block is
included but hasn't been updated), update_tag is zero, causing
a kernel divide-by-zero crash.
The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by
zero issue") only addressed occ_get_powr_avg() used by
occ_show_power_2() and occ_show_power_a0(). This separate code
path in occ_show_power_1() was missed.
Fix this by reusing the existing occ_get_powr_avg() helper, which
already handles the zero-sample case and uses mul_u64_u32_div()
to multiply before dividing for better precision. Move the helper
above occ_show_power_1() so it is visible at the call site.
[groeck: Fix alignment problems reported by checkpatch]
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated.
CVSS Score
8.8
EPSS Score
0.003
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio_device_register() should be at the end of the probe function to
prevent race conditions.
Place iio_device_register() at the end of the probe function and place
iio_device_unregister() accordingly.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix irq resource leak
The interrupt handler is setup but only a few lines down if
iio_trigger_register() fails the function returns without properly
releasing the handler.
Add cleanup goto to resolve resource leak.
Detected by Smatch:
drivers/iio/gyro/mpu3050-core.c:1128 mpu3050_trigger_probe() warn:
'irq' from request_threaded_irq() not released on lines: 1124.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050: Fix incorrect free_irq() variable
The handler for the IRQ part of this driver is mpu3050->trig but,
in the teardown free_irq() is called with handler mpu3050.
Use correct IRQ handler when calling free_irq().
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-adc161s626: use DMA-safe memory for spi_read()
Add a DMA-safe buffer and use it for spi_read() instead of a stack
memory. All SPI buffers must be DMA-safe.
Since we only need up to 3 bytes, we just use a u8[] instead of __be16
and __be32 and change the conversion functions appropriately.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: validate ND option lengths
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: gadget: fix state inconsistency on gadget init failure
When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode
while software state remains INACTIVE, creating hardware/software state
inconsistency.
When switching to host mode via sysfs:
echo host > /sys/class/usb_role/13180000.usb-role-switch/role
The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error,
so cdns_role_stop() skips cleanup because state is still INACTIVE.
This violates the DRD controller design specification (Figure22),
which requires returning to idle state before switching roles.
This leads to a synchronous external abort in xhci_gen_setup() when
setting up the host controller:
[ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19
[ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget
[ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed
...
[ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 1301.382485] pc : xhci_gen_setup+0xa4/0x408
[ 1301.393391] backtrace:
...
xhci_gen_setup+0xa4/0x408 <-- CRASH
xhci_plat_setup+0x44/0x58
usb_add_hcd+0x284/0x678
...
cdns_role_set+0x9c/0xbc <-- Role switch
Fix by calling cdns_drd_gadget_off() in the error path to properly
clean up the DRD gadget state.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-01
In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: Flush anchored URBs in usbtmc_release
When calling usbtmc_release, pending anchored URBs must be flushed or
killed to prevent use-after-free errors (e.g. in the HCD giveback
path). Call usbtmc_draw_down() to allow anchored URBs to be completed.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-01