In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix race condition in RPC handle list access
The 'sess->rpc_handle_list' XArray manages RPC handles within a ksmbd
session. Access to this list is intended to be protected by
'sess->rpc_lock' (an rw_semaphore). However, the locking implementation was
flawed, leading to potential race conditions.
In ksmbd_session_rpc_open(), the code incorrectly acquired only a read lock
before calling xa_store() and xa_erase(). Since these operations modify
the XArray structure, a write lock is required to ensure exclusive access
and prevent data corruption from concurrent modifications.
Furthermore, ksmbd_session_rpc_method() accessed the list using xa_load()
without holding any lock at all. This could lead to reading inconsistent
data or a potential use-after-free if an entry is concurrently removed and
the pointer is dereferenced.
Fix these issues by:
1. Using down_write() and up_write() in ksmbd_session_rpc_open()
to ensure exclusive access during XArray modification, and ensuring
the lock is correctly released on error paths.
2. Adding down_read() and up_read() in ksmbd_session_rpc_method()
to safely protect the lookup.
In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: Implement refcount to handle unbind during busy
driver support indirect read and indirect write operation with
assumption no force device removal(unbind) operation. However
force device removal(removal) is still available to root superuser.
Unbinding driver during operation causes kernel crash. This changes
ensure driver able to handle such operation for indirect read and
indirect write by implementing refcount to track attached devices
to the controller and gracefully wait and until attached devices
remove operation completed before proceed with removal operation.
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd/pgtbl: Fix possible race while increase page table level
The AMD IOMMU host page table implementation supports dynamic page table levels
(up to 6 levels), starting with a 3-level configuration that expands based on
IOVA address. The kernel maintains a root pointer and current page table level
to enable proper page table walks in alloc_pte()/fetch_pte() operations.
The IOMMU IOVA allocator initially starts with 32-bit address and onces its
exhuasted it switches to 64-bit address (max address is determined based
on IOMMU and device DMA capability). To support larger IOVA, AMD IOMMU
driver increases page table level.
But in unmap path (iommu_v1_unmap_pages()), fetch_pte() reads
pgtable->[root/mode] without lock. So its possible that in exteme corner case,
when increase_address_space() is updating pgtable->[root/mode], fetch_pte()
reads wrong page table level (pgtable->mode). It does compare the value with
level encoded in page table and returns NULL. This will result is
iommu_unmap ops to fail and upper layer may retry/log WARN_ON.
CPU 0 CPU 1
------ ------
map pages unmap pages
alloc_pte() -> increase_address_space() iommu_v1_unmap_pages() -> fetch_pte()
pgtable->root = pte (new root value)
READ pgtable->[mode/root]
Reads new root, old mode
Updates mode (pgtable->mode += 1)
Since Page table level updates are infrequent and already synchronized with a
spinlock, implement seqcount to enable lock-free read operations on the read path.
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: delete timer and free skb queue when unloading
Fix possible crash and memory leak on driver unload by deleting
TX purge timer and freeing C2H queue in 'rtw_core_deinit()',
shrink critical section in the latter by freeing COEX queue
out of TX report lock scope.
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220] drm_release+0x5e/0x100 [drm]
[14616.937234] __fput+0x9f/0x280
[14616.937239] ____fput+0xe/0x20
[14616.937241] task_work_run+0x61/0x90
[14616.937246] exit_to_user_mode_prepare+0x215/0x220
[14616.937251] syscall_exit_to_user_mode+0x2a/0x60
[14616.937254] do_syscall_64+0x48/0x90
[14616.937257] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In the Linux kernel, the following vulnerability has been resolved:
btrfs: insert tree mod log move in push_node_left
There is a fairly unlikely race condition in tree mod log rewind that
can result in a kernel panic which has the following trace:
[530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096
[530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096
[530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002
[530.618] #PF: supervisor read access in kernel mode
[530.629] #PF: error_code(0x0000) - not-present page
[530.641] PGD 0 P4D 0
[530.647] Oops: 0000 [#1] SMP
[530.654] CPU: 30 PID: 398973 Comm: below Kdump: loaded Tainted: G S O K 5.12.0-0_fbk13_clang_7455_gb24de3bdb045 #1
[530.680] Hardware name: Quanta Mono Lake-M.2 SATA 1HY9U9Z001G/Mono Lake-M.2 SATA, BIOS F20_3A15 08/16/2017
[530.703] RIP: 0010:__btrfs_map_block+0xaa/0xd00
[530.755] RSP: 0018:ffffc9002c2f7600 EFLAGS: 00010246
[530.767] RAX: ffffffffffffffea RBX: ffff888292e41000 RCX: f2702d8b8be15100
[530.784] RDX: ffff88885fda6fb8 RSI: ffff88885fd973c8 RDI: ffff88885fd973c8
[530.800] RBP: ffff888292e410d0 R08: ffffffff82fd7fd0 R09: 00000000fffeffff
[530.816] R10: ffffffff82e57fd0 R11: ffffffff82e57d70 R12: 0000000000000000
[530.832] R13: 0000000000001000 R14: 0000000000001000 R15: ffffc9002c2f76f0
[530.848] FS: 00007f38d64af000(0000) GS:ffff88885fd80000(0000) knlGS:0000000000000000
[530.866] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[530.880] CR2: 0000000000000002 CR3: 00000002b6770004 CR4: 00000000003706e0
[530.896] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[530.912] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[530.928] Call Trace:
[530.934] ? btrfs_printk+0x13b/0x18c
[530.943] ? btrfs_bio_counter_inc_blocked+0x3d/0x130
[530.955] btrfs_map_bio+0x75/0x330
[530.963] ? kmem_cache_alloc+0x12a/0x2d0
[530.973] ? btrfs_submit_metadata_bio+0x63/0x100
[530.984] btrfs_submit_metadata_bio+0xa4/0x100
[530.995] submit_extent_page+0x30f/0x360
[531.004] read_extent_buffer_pages+0x49e/0x6d0
[531.015] ? submit_extent_page+0x360/0x360
[531.025] btree_read_extent_buffer_pages+0x5f/0x150
[531.037] read_tree_block+0x37/0x60
[531.046] read_block_for_search+0x18b/0x410
[531.056] btrfs_search_old_slot+0x198/0x2f0
[531.066] resolve_indirect_ref+0xfe/0x6f0
[531.076] ? ulist_alloc+0x31/0x60
[531.084] ? kmem_cache_alloc_trace+0x12e/0x2b0
[531.095] find_parent_nodes+0x720/0x1830
[531.105] ? ulist_alloc+0x10/0x60
[531.113] iterate_extent_inodes+0xea/0x370
[531.123] ? btrfs_previous_extent_item+0x8f/0x110
[531.134] ? btrfs_search_path_in_tree+0x240/0x240
[531.146] iterate_inodes_from_logical+0x98/0xd0
[531.157] ? btrfs_search_path_in_tree+0x240/0x240
[531.168] btrfs_ioctl_logical_to_ino+0xd9/0x180
[531.179] btrfs_ioctl+0xe2/0x2eb0
This occurs when logical inode resolution takes a tree mod log sequence
number, and then while backref walking hits a rewind on a busy node
which has the following sequence of tree mod log operations (numbers
filled in from a specific example, but they are somewhat arbitrary)
REMOVE_WHILE_FREEING slot 532
REMOVE_WHILE_FREEING slot 531
REMOVE_WHILE_FREEING slot 530
...
REMOVE_WHILE_FREEING slot 0
REMOVE slot 455
REMOVE slot 454
REMOVE slot 453
...
REMOVE slot 0
ADD slot 455
ADD slot 454
ADD slot 453
...
ADD slot 0
MOVE src slot 0 -> dst slot 456 nritems 533
REMOVE slot 455
REMOVE slot 454
REMOVE slot 453
...
REMOVE slot 0
When this sequence gets applied via btrfs_tree_mod_log_rewind, it
allocates a fresh rewind eb, and first inserts the correct key info for
the 533 elements, then overwrites the first 456 of them, then decrements
the count by 456 via the add ops, then rewinds the move by doing a
memmove from 456:988->0:532. We have never written anything past 532,
---truncated---
In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: avoid buffer overflow in WID string configuration
Fix the following copy overflow warning identified by Smatch checker.
drivers/net/wireless/microchip/wilc1000/wlan_cfg.c:184 wilc_wlan_parse_response_frame()
error: '__memcpy()' 'cfg->s[i]->str' copy overflow (512 vs 65537)
This patch introduces size check before accessing the memory buffer.
The checks are base on the WID type of received data from the firmware.
For WID string configuration, the size limit is determined by individual
element size in 'struct wilc_cfg_str_vals' that is maintained in 'len' field
of 'struct wilc_cfg_str'.
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Harden uplink netdev access against device unbind
The function mlx5_uplink_netdev_get() gets the uplink netdevice
pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can
be removed and its pointer cleared when unbound from the mlx5_core.eth
driver. This results in a NULL pointer, causing a kernel panic.
BUG: unable to handle page fault for address: 0000000000001300
at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core]
Call Trace:
<TASK>
mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core]
esw_offloads_enable+0x593/0x910 [mlx5_core]
mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core]
devlink_nl_eswitch_set_doit+0x60/0xd0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x183/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
do_syscall_64+0x53/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Ensure the pointer is valid before use by checking it for NULL. If it
is valid, immediately call netdev_hold() to take a reference, and
preventing the netdevice from being freed while it is in use.
In the Linux kernel, the following vulnerability has been resolved:
smb: client: let recv_done verify data_offset, data_length and remaining_data_length
This is inspired by the related server fixes.