Linux: >> Linux Kernel >> 5.10.146 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
x86/apic: Disable x2apic on resume if the kernel expects so
When resuming from s2ram, firmware may re-enable x2apic mode, which may have
been disabled by the kernel during boot either because it doesn't support IRQ
remapping or for other reasons. This causes the kernel to continue using the
xapic interface, while the hardware is in x2apic mode, which causes hangs.
This happens on defconfig + bare metal + s2ram.
Fix this in lapic_resume() by disabling x2apic if the kernel expects it to be
disabled, i.e. when x2apic_mode = 0.
The ACPI v6.6 spec, Section 16.3 [1] says firmware restores either the
pre-sleep configuration or initial boot configuration for each CPU, including
MSR state:
When executing from the power-on reset vector as a result of waking from an
S2 or S3 sleep state, the platform firmware performs only the hardware
initialization required to restore the system to either the state the
platform was in prior to the initial operating system boot, or to the
pre-sleep configuration state. In multiprocessor systems, non-boot
processors should be placed in the same state as prior to the initial
operating system boot.
(further ahead)
If this is an S2 or S3 wake, then the platform runtime firmware restores
minimum context of the system before jumping to the waking vector. This
includes:
CPU configuration. Platform runtime firmware restores the pre-sleep
configuration or initial boot configuration of each CPU (MSR, MTRR,
firmware update, SMBase, and so on). Interrupts must be disabled (for
IA-32 processors, disabled by CLI instruction).
(and other things)
So at least as per the spec, re-enablement of x2apic by the firmware is
allowed if "x2apic on" is a part of the initial boot configuration.
[1] https://uefi.org/specs/ACPI/6.6/16_Waking_and_Sleeping.html#initialization
[ bp: Massage. ]
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
iio: gyro: mpu3050-core: fix pm_runtime error handling
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort on set received ioctl due to item overflow
If the set received ioctl fails due to an item overflow when attempting to
add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction
since we did some metadata updates before.
This means that if a user calls this ioctl with the same received UUID
field for a lot of subvolumes, we will hit the overflow, trigger the
transaction abort and turn the filesystem into RO mode. A malicious user
could exploit this, and this ioctl does not even requires that a user
has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume.
Fix this by doing an early check for item overflow before starting a
transaction. This is also race safe because we are holding the subvol_sem
semaphore in exclusive (write) mode.
A test case for fstests will follow soon.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction abort when snapshotting received subvolumes
Currently a user can trigger a transaction abort by snapshotting a
previously received snapshot a bunch of times until we reach a
BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we
can store in a leaf). This is very likely not common in practice, but
if it happens, it turns the filesystem into RO mode. The snapshot, send
and set_received_subvol and subvol_setflags (used by receive) don't
require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user
could use this to turn a filesystem into RO mode and disrupt a system.
Reproducer script:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
# Use smallest node size to make the test faster.
mkfs.btrfs -f --nodesize 4K $DEV
mount $DEV $MNT
# Create a subvolume and set it to RO so that it can be used for send.
btrfs subvolume create $MNT/sv
touch $MNT/sv/foo
btrfs property set $MNT/sv ro true
# Send and receive the subvolume into snaps/sv.
mkdir $MNT/snaps
btrfs send $MNT/sv | btrfs receive $MNT/snaps
# Now snapshot the received subvolume, which has a received_uuid, a
# lot of times to trigger the leaf overflow.
total=500
for ((i = 1; i <= $total; i++)); do
echo -ne "\rCreating snapshot $i/$total"
btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null
done
echo
umount $MNT
When running the test:
$ ./test.sh
(...)
Create subvolume '/mnt/sdi/sv'
At subvol /mnt/sdi/sv
At subvol sv
Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type
Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system
Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system
And in dmesg/syslog:
$ dmesg
(...)
[251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252!
[251067.629212] ------------[ cut here ]------------
[251067.630033] BTRFS: Transaction aborted (error -75)
[251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235
[251067.632851] Modules linked in: btrfs dm_zero (...)
[251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[251067.646165] Tainted: [W]=WARN
[251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs]
[251067.649984] Code: f0 48 0f (...)
[251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292
[251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3
[251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750
[251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820
[251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0
[251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5
[251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000
[251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0
[251067.661972] Call Trace:
[251067.662292] <TASK>
[251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs]
[251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs]
[251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs]
[251067.665238] ? _raw_spin_unlock+0x15/0x30
[251067.665837] ? record_root_
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
smb: client: require a full NFS mode SID before reading mode bits
parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS
mode SID and reads sid.sub_auth[2] to recover the mode bits.
That assumes the ACE carries three subauthorities, but compare_sids()
only compares min(a, b) subauthorities. A malicious server can return
an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still
matches sid_unix_NFS_mode and then drives the sub_auth[2] read four
bytes past the end of the ACE.
Require num_subauth >= 3 before treating the ACE as an NFS mode SID.
This keeps the fix local to the special-SID mode path without changing
compare_sids() semantics for the rest of cifsacl.
CVSS Score
7.6
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Protect RNDIS options with mutex
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
CVSS Score
8.8
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: chacha: Zeroize permuted_state before it leaves scope
Since the ChaCha permutation is invertible, the local variable
'permuted_state' is sufficient to compute the original 'state', and thus
the key, even after the permutation has been done.
While the kernel is quite inconsistent about zeroizing secrets on the
stack (and some prominent userspace crypto libraries don't bother at all
since it's not guaranteed to work anyway), the kernel does try to do it
as a best practice, especially in cases involving the RNG.
Thus, explicitly zeroize 'permuted_state' before it goes out of scope.
CVSS Score
7.5
EPSS Score
0.001
Published
2026-05-08