Linux: >> Linux Kernel >> 5.7.7 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: free skb on nci_transceive early error paths
nci_transceive() takes ownership of the skb passed by the caller,
but the -EPROTO, -EINVAL, and -EBUSY error paths return without
freeing it.
Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes
the nci/nci_dev selftest hits the error path occasionally in NIPA,
and kmemleak detects leaks:
unreferenced object 0xff11000015ce6a40 (size 640):
comm "nci_dev", pid 3954, jiffies 4295441246
hex dump (first 32 bytes):
6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
backtrace (crc 7c40cc2a):
kmem_cache_alloc_node_noprof+0x492/0x630
__alloc_skb+0x11e/0x5f0
alloc_skb_with_frags+0xc6/0x8f0
sock_alloc_send_pskb+0x326/0x3f0
nfc_alloc_send_skb+0x94/0x1d0
rawsock_sendmsg+0x162/0x4c0
do_syscall_64+0x117/0xfc0
CVSS Score
5.5
EPSS Score
0.0
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs
When shrinking the number of real tx queues,
netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush
qdiscs for queues which will no longer be used.
qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with
qdisc_lock(). However, for lockless qdiscs, the dequeue path is
serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so
qdisc_reset() can run concurrently with __qdisc_run() and free skbs
while they are still being dequeued, leading to UAF.
This can easily be reproduced on e.g. virtio-net by imposing heavy
traffic while frequently changing the number of queue pairs:
iperf3 -ub0 -c $peer -t 0 &
while :; do
ethtool -L eth0 combined 1
ethtool -L eth0 combined 2
done
With KASAN enabled, this leads to reports like:
BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760
...
Call Trace:
<TASK>
...
__qdisc_run+0x133f/0x1760
__dev_queue_xmit+0x248f/0x3550
ip_finish_output2+0xa42/0x2110
ip_output+0x1a7/0x410
ip_send_skb+0x2e6/0x480
udp_send_skb+0xb0a/0x1590
udp_sendmsg+0x13c9/0x1fc0
...
</TASK>
Allocated by task 1270 on cpu 5 at 44.558414s:
...
alloc_skb_with_frags+0x84/0x7c0
sock_alloc_send_pskb+0x69a/0x830
__ip_append_data+0x1b86/0x48c0
ip_make_skb+0x1e8/0x2b0
udp_sendmsg+0x13a6/0x1fc0
...
Freed by task 1306 on cpu 3 at 44.558445s:
...
kmem_cache_free+0x117/0x5e0
pfifo_fast_reset+0x14d/0x580
qdisc_reset+0x9e/0x5f0
netif_set_real_num_tx_queues+0x303/0x840
virtnet_set_channels+0x1bf/0x260 [virtio_net]
ethnl_set_channels+0x684/0xae0
ethnl_default_set_doit+0x31a/0x890
...
Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by
taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the
serialization model already used by dev_reset_queue().
Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state
reflects an empty queue, avoiding needless re-scheduling.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: complete pending data exchange on device close
In nci_close_device(), complete any pending data exchange before
closing. The data exchange callback (e.g.
rawsock_data_exchange_complete) holds a socket reference.
NIPA occasionally hits this leak:
unreferenced object 0xff1100000f435000 (size 2048):
comm "nci_dev", pid 3954, jiffies 4295441245
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............
backtrace (crc ec2b3c5):
__kmalloc_noprof+0x4db/0x730
sk_prot_alloc.isra.0+0xe4/0x1d0
sk_alloc+0x36/0x760
rawsock_create+0xd1/0x540
nfc_sock_create+0x11f/0x280
__sock_create+0x22d/0x630
__sys_socket+0x115/0x1d0
__x64_sys_socket+0x72/0xd0
do_syscall_64+0x117/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CVSS Score
5.5
EPSS Score
0.0
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Use correct version for UAC3 header validation
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-03-25
In the Linux kernel, the following vulnerability has been resolved:
fbdev: smscufx: properly copy ioctl memory to kernelspace
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
CVSS Score
7.3
EPSS Score
0.0
Published
2026-03-04
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: classmate-laptop: Add missing NULL pointer checks
In a few places in the Classmate laptop driver, code using the accel
object may run before that object's address is stored in the driver
data of the input device using it.
For example, cmpc_accel_sensitivity_store_v4() is the "show" method
of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(),
before calling dev_set_drvdata() for inputdev->dev. If the sysfs
attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev)
call in in cmpc_accel_sensitivity_store_v4() returns NULL which
leads to a NULL pointer dereference going forward.
Moreover, sysfs attributes using the input device are added before
initializing that device by cmpc_add_acpi_notify_device() and if one
of them is accessed before running that function, a NULL pointer
dereference will occur.
For example, cmpc_accel_sensitivity_attr_v4 is added before calling
cmpc_add_acpi_notify_device() and if it is read prematurely, the
dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4()
returns NULL which leads to a NULL pointer dereference going forward.
Fix this by adding NULL pointer checks in all of the relevant places.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-03-04
In the Linux kernel, the following vulnerability has been resolved:
romfs: check sb_set_blocksize() return value
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-03-04
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid UAF in f2fs_write_end_io()
As syzbot reported an use-after-free issue in f2fs_write_end_io().
It is caused by below race condition:
loop device umount
- worker_thread
- loop_process_work
- do_req_filebacked
- lo_rw_aio
- lo_rw_aio_complete
- blk_mq_end_request
- blk_update_request
- f2fs_write_end_io
- dec_page_count
- folio_end_writeback
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: free(sbi)
: get_pages(, F2FS_WB_CP_DATA)
accessed sbi which is freed
In kill_f2fs_super(), we will drop all page caches of f2fs inodes before
call free(sbi), it guarantee that all folios should end its writeback, so
it should be safe to access sbi before last folio_end_writeback().
Let's relocate ckpt thread wakeup flow before folio_end_writeback() to
resolve this issue.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-03-04
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix out-of-bounds access in sysfs attribute read/write
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-03-04
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix bsg_done() causing double free
Kernel panic observed on system,
[5353358.825191] BUG: unable to handle page fault for address: ff5f5e897b024000
[5353358.825194] #PF: supervisor write access in kernel mode
[5353358.825195] #PF: error_code(0x0002) - not-present page
[5353358.825196] PGD 100006067 P4D 0
[5353358.825198] Oops: 0002 [#1] PREEMPT SMP NOPTI
[5353358.825200] CPU: 5 PID: 2132085 Comm: qlafwupdate.sub Kdump: loaded Tainted: G W L ------- --- 5.14.0-503.34.1.el9_5.x86_64 #1
[5353358.825203] Hardware name: HPE ProLiant DL360 Gen11/ProLiant DL360 Gen11, BIOS 2.44 01/17/2025
[5353358.825204] RIP: 0010:memcpy_erms+0x6/0x10
[5353358.825211] RSP: 0018:ff591da8f4f6b710 EFLAGS: 00010246
[5353358.825212] RAX: ff5f5e897b024000 RBX: 0000000000007090 RCX: 0000000000001000
[5353358.825213] RDX: 0000000000001000 RSI: ff591da8f4fed090 RDI: ff5f5e897b024000
[5353358.825214] RBP: 0000000000010000 R08: ff5f5e897b024000 R09: 0000000000000000
[5353358.825215] R10: ff46cf8c40517000 R11: 0000000000000001 R12: 0000000000008090
[5353358.825216] R13: ff591da8f4f6b720 R14: 0000000000001000 R15: 0000000000000000
[5353358.825218] FS: 00007f1e88d47740(0000) GS:ff46cf935f940000(0000) knlGS:0000000000000000
[5353358.825219] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[5353358.825220] CR2: ff5f5e897b024000 CR3: 0000000231532004 CR4: 0000000000771ef0
[5353358.825221] PKRU: 55555554
[5353358.825222] Call Trace:
[5353358.825223] <TASK>
[5353358.825224] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825229] ? show_trace_log_lvl+0x1c4/0x2df
[5353358.825232] ? sg_copy_buffer+0xc8/0x110
[5353358.825236] ? __die_body.cold+0x8/0xd
[5353358.825238] ? page_fault_oops+0x134/0x170
[5353358.825242] ? kernelmode_fixup_or_oops+0x84/0x110
[5353358.825244] ? exc_page_fault+0xa8/0x150
[5353358.825247] ? asm_exc_page_fault+0x22/0x30
[5353358.825252] ? memcpy_erms+0x6/0x10
[5353358.825253] sg_copy_buffer+0xc8/0x110
[5353358.825259] qla2x00_process_vendor_specific+0x652/0x1320 [qla2xxx]
[5353358.825317] qla24xx_bsg_request+0x1b2/0x2d0 [qla2xxx]
Most routines in qla_bsg.c call bsg_done() only for success cases.
However a few invoke it for failure case as well leading to a double
free. Validate before calling bsg_done().
CVSS Score
7.8
EPSS Score
0.0
Published
2026-03-04