Linux: >> Linux Kernel >> 5.1.17 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: force responder MITM requirements before building the pairing response
smp_cmd_pairing_req() currently builds the pairing response from the
initiator auth_req before enforcing the local BT_SECURITY_HIGH
requirement. If the initiator omits SMP_AUTH_MITM, the response can
also omit it even though the local side still requires MITM.
tk_request() then sees an auth value without SMP_AUTH_MITM and may
select JUST_CFM, making method selection inconsistent with the pairing
policy the responder already enforces.
When the local side requires HIGH security, first verify that MITM can
be achieved from the IO capabilities and then force SMP_AUTH_MITM in the
response in both rsp.auth_req and auth. This keeps the responder auth bits
and later method selection aligned.
CVSS Score
8.8
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
lib/crypto: chacha: Zeroize permuted_state before it leaves scope
Since the ChaCha permutation is invertible, the local variable
'permuted_state' is sufficient to compute the original 'state', and thus
the key, even after the permutation has been done.
While the kernel is quite inconsistent about zeroizing secrets on the
stack (and some prominent userspace crypto libraries don't bother at all
since it's not guaranteed to work anyway), the kernel does try to do it
as a best practice, especially in cases involving the RNG.
Thus, explicitly zeroize 'permuted_state' before it goes out of scope.
CVSS Score
7.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
btrfs: reserve enough transaction items for qgroup ioctls
Currently our qgroup ioctls don't reserve any space, they just do a
transaction join, which does not reserve any space, neither for the quota
tree updates nor for the delayed refs generated when updating the quota
tree. The quota root uses the global block reserve, which is fine most of
the time since we don't expect a lot of updates to the quota root, or to
be too close to -ENOSPC such that other critical metadata updates need to
resort to the global reserve.
However this is not optimal, as not reserving proper space may result in a
transaction abort due to not reserving space for delayed refs and then
abusing the use of the global block reserve.
For example, the following reproducer (which is unlikely to model any
real world use case, but just to illustrate the problem), triggers such a
transaction abort due to -ENOSPC when running delayed refs:
$ cat test.sh
#!/bin/bash
DEV=/dev/nullb0
MNT=/mnt/nullb0
umount $DEV &> /dev/null
# Limit device to 1G so that it's much faster to reproduce the issue.
mkfs.btrfs -f -b 1G $DEV
mount -o commit=600 $DEV $MNT
fallocate -l 800M $MNT/filler
btrfs quota enable $MNT
for ((i = 1; i <= 400000; i++)); do
btrfs qgroup create 1/$i $MNT
done
umount $MNT
When running this, we can see in dmesg/syslog that a transaction abort
happened:
[436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28
[436.493] ------------[ cut here ]------------
[436.494] BTRFS: Transaction aborted (error -28)
[436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372
[436.497] Modules linked in: btrfs loop (...)
[436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full)
[436.510] Tainted: [W]=WARN
[436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs]
[436.514] Code: 0f 82 ea (...)
[436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292
[436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001
[436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80
[436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867
[436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400
[436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000
[436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000
[436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0
[436.530] Call Trace:
[436.530] <TASK>
[436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs]
[436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs]
[436.532] sync_filesystem+0x7a/0x90
[436.533] generic_shutdown_super+0x28/0x180
[436.533] kill_anon_super+0x12/0x40
[436.534] btrfs_kill_super+0x12/0x20 [btrfs]
[436.534] deactivate_locked_super+0x2f/0xb0
[436.534] cleanup_mnt+0xea/0x180
[436.535] task_work_run+0x58/0xa0
[436.535] exit_to_user_mode_loop+0xed/0x480
[436.536] ? __x64_sys_umount+0x68/0x80
[436.536] do_syscall_64+0x2a5/0xf20
[436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[436.537] RIP: 0033:0x7fe5906b6217
[436.538] Code: 0d 00 f7 (...)
[436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217
[436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100
[436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff
[436.544] R10: 0000000000000103 R11:
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent possible UaF in addrconf_permanent_addr()
The mentioned helper try to warn the user about an exceptional
condition, but the message is delivered too late, accessing the ipv6
after its possible deletion.
Reorder the statement to avoid the possible UaF; while at it, place the
warning outside the idev->lock as it needs no protection.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
USB: dummy-hcd: Fix locking/synchronization error
Syzbot testing was able to provoke an addressing exception and crash
in the usb_gadget_udc_reset() routine in
drivers/usb/gadgets/udc/core.c, resulting from the fact that the
routine was called with a second ("driver") argument of NULL. The bad
caller was set_link_state() in dummy_hcd.c, and the problem arose
because of a race between a USB reset and driver unbind.
These sorts of races were not supposed to be possible; commit
7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"),
along with a few followup commits, was written specifically to prevent
them. As it turns out, there are (at least) two errors remaining in
the code. Another patch will address the second error; this one is
concerned with the first.
The error responsible for the syzbot crash occurred because the
stop_activity() routine will sometimes drop and then re-acquire the
dum->lock spinlock. A call to stop_activity() occurs in
set_link_state() when handling an emulated USB reset, after the test
of dum->ints_enabled and before the increment of dum->callback_usage.
This allowed another thread (doing a driver unbind) to sneak in and
grab the spinlock, and then clear dum->ints_enabled and dum->driver.
Normally this other thread would have to wait for dum->callback_usage
to go down to 0 before it would clear dum->driver, but in this case it
didn't have to wait since dum->callback_usage had not yet been
incremented.
The fix is to increment dum->callback_usage _before_ calling
stop_activity() instead of after. Then the thread doing the unbind
will not clear dum->driver until after the call to
usb_gadget_udc_reset() safely returns and dum->callback_usage has been
decremented again.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x]
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()
In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE
device and then reassigned an ISA device:
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...);
dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...);
If the first lookup succeeds but the second fails, dev becomes NULL. This
leads to a potential null-pointer dereference when dev_dbg() is called:
if (errata.piix4.bmisx)
dev_dbg(&dev->dev, ...);
To prevent this, use two temporary pointers and retrieve each device
independently, avoiding overwriting dev with a possible NULL value.
[ rjw: Subject adjustment, added an empty code line ]
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
dm: remove fake timeout to avoid leak request
Since commit 15f73f5b3e59 ("blk-mq: move failure injection out of
blk_mq_complete_request"), drivers are responsible for calling
blk_should_fake_timeout() at appropriate code paths and opportunities.
However, the dm driver does not implement its own timeout handler and
relies on the timeout handling of its slave devices.
If an io-timeout-fail error is injected to a dm device, the request
will be leaked and never completed, causing tasks to hang indefinitely.
Reproduce:
1. prepare dm which has iscsi slave device
2. inject io-timeout-fail to dm
echo 1 >/sys/class/block/dm-0/io-timeout-fail
echo 100 >/sys/kernel/debug/fail_io_timeout/probability
echo 10 >/sys/kernel/debug/fail_io_timeout/times
3. read/write dm
4. iscsiadm -m node -u
Result: hang task like below
[ 862.243768] INFO: task kworker/u514:2:151 blocked for more than 122 seconds.
[ 862.244133] Tainted: G E 6.19.0-rc1+ #51
[ 862.244337] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 862.244718] task:kworker/u514:2 state:D stack:0 pid:151 tgid:151 ppid:2 task_flags:0x4288060 flags:0x00080000
[ 862.245024] Workqueue: iscsi_ctrl_3:1 __iscsi_unbind_session [scsi_transport_iscsi]
[ 862.245264] Call Trace:
[ 862.245587] <TASK>
[ 862.245814] __schedule+0x810/0x15c0
[ 862.246557] schedule+0x69/0x180
[ 862.246760] blk_mq_freeze_queue_wait+0xde/0x120
[ 862.247688] elevator_change+0x16d/0x460
[ 862.247893] elevator_set_none+0x87/0xf0
[ 862.248798] blk_unregister_queue+0x12e/0x2a0
[ 862.248995] __del_gendisk+0x231/0x7e0
[ 862.250143] del_gendisk+0x12f/0x1d0
[ 862.250339] sd_remove+0x85/0x130 [sd_mod]
[ 862.250650] device_release_driver_internal+0x36d/0x530
[ 862.250849] bus_remove_device+0x1dd/0x3f0
[ 862.251042] device_del+0x38a/0x930
[ 862.252095] __scsi_remove_device+0x293/0x360
[ 862.252291] scsi_remove_target+0x486/0x760
[ 862.252654] __iscsi_unbind_session+0x18a/0x3e0 [scsi_transport_iscsi]
[ 862.252886] process_one_work+0x633/0xe50
[ 862.253101] worker_thread+0x6df/0xf10
[ 862.253647] kthread+0x36d/0x720
[ 862.254533] ret_from_fork+0x2a6/0x470
[ 862.255852] ret_from_fork_asm+0x1a/0x30
[ 862.256037] </TASK>
Remove the blk_should_fake_timeout() check from dm, as dm has no
native timeout handling and should not attempt to fake timeouts.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG() on unexpected delayed ref type in run_one_delayed_ref()
There is no need to BUG(), we can just return an error and log an error
message.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08