Linux: >> Linux Kernel >> 2.6.23.11 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Run DC_LOG_DC after checking link->link_enc
[WHAT]
The DC_LOG_DC should be run after link->link_enc is checked, not before.
This fixes 1 REVERSE_INULL issue reported by Coverity.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
udf: Avoid excessive partition lengths
Avoid mounting filesystems where the partition would overflow the
32-bits used for block number. Also refuse to mount filesystems where
the partition length is so large we cannot safely index bits in a
block bitmap.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check UnboundedRequestEnabled's value
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled
is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus
if (p->UnboundedRequestEnabled) checks its address, not bool value.
This fixes 1 REVERSE_INULL issue reported by Coverity.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info()
Instead of doing a BUG_ON() handle the error by returning -EUCLEAN,
aborting the transaction and logging an error message.
CVSS Score
5.5
EPSS Score
0.001
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: Do not return unused priv in mwifiex_get_priv_by_id()
mwifiex_get_priv_by_id() returns the priv pointer corresponding to
the bss_num and bss_type, but without checking if the priv is actually
currently in use.
Unused priv pointers do not have a wiphy attached to them which can
lead to NULL pointer dereferences further down the callstack. Fix
this by returning only used priv pointers which have priv->bss_mode
set to something else than NL80211_IFTYPE_UNSPECIFIED.
Said NULL pointer dereference happened when an Accesspoint was started
with wpa_supplicant -i mlan0 with this config:
network={
ssid="somessid"
mode=2
frequency=2412
key_mgmt=WPA-PSK WPA-PSK-SHA256
proto=RSN
group=CCMP
pairwise=CCMP
psk="12345678"
}
When waiting for the AP to be established, interrupting wpa_supplicant
with <ctrl-c> and starting it again this happens:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000
| [0000000000000140] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio
+mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs
+imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6
| CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18
| Hardware name: somemachine (DT)
| Workqueue: events sdio_irq_work
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| lr : mwifiex_get_cfp+0x34/0x15c [mwifiex]
| sp : ffff8000818b3a70
| x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004
| x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9
| x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000
| x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000
| x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517
| x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1
| x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157
| x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124
| x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000
| Call trace:
| mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex]
| mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex]
| mwifiex_process_sta_event+0x298/0xf0c [mwifiex]
| mwifiex_process_event+0x110/0x238 [mwifiex]
| mwifiex_main_process+0x428/0xa44 [mwifiex]
| mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio]
| process_sdio_pending_irqs+0x64/0x1b8
| sdio_irq_work+0x4c/0x7c
| process_one_work+0x148/0x2a0
| worker_thread+0x2fc/0x40c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
| Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000)
| ---[ end trace 0000000000000000 ]---
CVSS Score
5.5
EPSS Score
0.001
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
CVSS Score
7.8
EPSS Score
0.001
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: usb: schedule rx work after everything is set up
Right now it's possible to hit NULL pointer dereference in
rtw_rx_fill_rx_status on hw object and/or its fields because
initialization routine can start getting USB replies before
rtw_dev is fully setup.
The stack trace looks like this:
rtw_rx_fill_rx_status
rtw8821c_query_rx_desc
rtw_usb_rx_handler
...
queue_work
rtw_usb_read_port_complete
...
usb_submit_urb
rtw_usb_rx_resubmit
rtw_usb_init_rx
rtw_usb_probe
So while we do the async stuff rtw_usb_probe continues and calls
rtw_register_hw, which does all kinds of initialization (e.g.
via ieee80211_register_hw) that rtw_rx_fill_rx_status relies on.
Fix this by moving the first usb_submit_urb after everything
is set up.
For me, this bug manifested as:
[ 8.893177] rtw_8821cu 1-1:1.2: band wrong, packet dropped
[ 8.910904] rtw_8821cu 1-1:1.2: hw->conf.chandef.chan NULL in rtw_rx_fill_rx_status
because I'm using Larry's backport of rtw88 driver with the NULL
checks in rtw_rx_fill_rx_status.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed.
CVSS Score
5.5
EPSS Score
0.001
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
xen: privcmd: Fix possible access to a freed kirqfd instance
Nothing prevents simultaneous ioctl calls to privcmd_irqfd_assign() and
privcmd_irqfd_deassign(). If that happens, it is possible that a kirqfd
created and added to the irqfds_list by privcmd_irqfd_assign() may get
removed by another thread executing privcmd_irqfd_deassign(), while the
former is still using it after dropping the locks.
This can lead to a situation where an already freed kirqfd instance may
be accessed and cause kernel oops.
Use SRCU locking to prevent the same, as is done for the KVM
implementation for irqfds.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-09-18
In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
null-ptr-deref will occur when (req_op_level == SMB2_OPLOCK_LEVEL_LEASE)
and parse_lease_state() return NULL.
Fix this by check if 'lease_ctx_info' is NULL.
Additionally, remove the redundant parentheses in
parse_durable_handle_context().
CVSS Score
5.5
EPSS Score
0.001
Published
2024-09-18