Linux: >> Linux Kernel >> 4.14.323 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix crash due to stale SRB access around I/O timeouts
Ensure SRB is returned during I/O timeout error escalation. If that is not
possible fail the escalation path.
Following crash stack was seen:
BUG: unable to handle kernel paging request at 0000002f56aa90f8
IP: qla_chk_edif_rx_sa_delete_pending+0x14/0x30 [qla2xxx]
Call Trace:
? qla2x00_status_entry+0x19f/0x1c50 [qla2xxx]
? qla2x00_start_sp+0x116/0x1170 [qla2xxx]
? dma_pool_alloc+0x1d6/0x210
? mempool_alloc+0x54/0x130
? qla24xx_process_response_queue+0x548/0x12b0 [qla2xxx]
? qla_do_work+0x2d/0x40 [qla2xxx]
? process_one_work+0x14c/0x390
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
sched, cpuset: Fix dl_cpu_busy() panic due to empty cs->cpus_allowed
With cgroup v2, the cpuset's cpus_allowed mask can be empty indicating
that the cpuset will just use the effective CPUs of its parent. So
cpuset_can_attach() can call task_can_attach() with an empty mask.
This can lead to cpumask_any_and() returns nr_cpu_ids causing the call
to dl_bw_of() to crash due to percpu value access of an out of bound
CPU value. For example:
[80468.182258] BUG: unable to handle page fault for address: ffffffff8b6648b0
:
[80468.191019] RIP: 0010:dl_cpu_busy+0x30/0x2b0
:
[80468.207946] Call Trace:
[80468.208947] cpuset_can_attach+0xa0/0x140
[80468.209953] cgroup_migrate_execute+0x8c/0x490
[80468.210931] cgroup_update_dfl_csses+0x254/0x270
[80468.211898] cgroup_subtree_control_write+0x322/0x400
[80468.212854] kernfs_fop_write_iter+0x11c/0x1b0
[80468.213777] new_sync_write+0x11f/0x1b0
[80468.214689] vfs_write+0x1eb/0x280
[80468.215592] ksys_write+0x5f/0xe0
[80468.216463] do_syscall_64+0x5c/0x80
[80468.224287] entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix that by using effective_cpus instead. For cgroup v1, effective_cpus
is the same as cpus_allowed. For v2, effective_cpus is the real cpumask
to be used by tasks within the cpuset anyway.
Also update task_can_attach()'s 2nd argument name to cs_effective_cpus to
reflect the change. In addition, a check is added to task_can_attach()
to guard against the possibility that cpumask_any_and() may return a
value >= nr_cpu_ids.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
Fault inject on pool metadata device reports:
BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950
CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xeb/0x3f4
kasan_report.cold+0xe6/0x147
dm_pool_register_metadata_threshold+0x40/0x80
pool_ctr+0xa0a/0x1150
dm_table_add_target+0x2c8/0x640
table_load+0x1fd/0x430
ctl_ioctl+0x2c4/0x5a0
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb3/0xd0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This can be easily reproduced using:
echo offline > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"
If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).
Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d
CVSS Score
7.1
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix warning in ext4_iomap_begin as race between bmap and write
We got issue as follows:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0
RIP: 0010:ext4_iomap_begin+0x182/0x5d0
RSP: 0018:ffff88812460fa08 EFLAGS: 00010293
RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f
R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001
R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee
FS: 00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
iomap_apply+0x119/0x570
iomap_bmap+0x124/0x150
ext4_bmap+0x14f/0x250
bmap+0x55/0x80
do_vfs_ioctl+0x952/0xbd0
__x64_sys_ioctl+0xc6/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Above issue may happen as follows:
bmap write
bmap
ext4_bmap
iomap_bmap
ext4_iomap_begin
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin
ext4_prepare_inline_data
ext4_create_inline_data
ext4_set_inode_flag(inode,
EXT4_INODE_INLINE_DATA);
if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on
To solved above issue hold inode lock in ext4_bamp.
CVSS Score
7.0
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
block: don't allow the same type rq_qos add more than once
In our test of iocost, we encountered some list add/del corruptions of
inner_walk list in ioc_timer_fn.
The reason can be described as follows:
cpu 0 cpu 1
ioc_qos_write ioc_qos_write
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
ioc = q_to_ioc(queue);
if (!ioc) {
ioc = kzalloc();
...
rq_qos_add(q, rqos);
}
...
rq_qos_add(q, rqos);
...
}
When the io.cost.qos file is written by two cpus concurrently, rq_qos may
be added to one disk twice. In that case, there will be two iocs enabled
and running on one disk. They own different iocgs on their active list. In
the ioc_timer_fn function, because of the iocgs from two iocs have the
same root iocg, the root iocg's walk_list may be overwritten by each other
and this leads to list add/del corruptions in building or destroying the
inner_walk list.
And so far, the blk-rq-qos framework works in case that one instance for
one type rq_qos per queue by default. This patch make this explicit and
also fix the crash above.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null
Fixes a NULL pointer derefence bug triggered from tap driver.
When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null
(in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb)
virtio_net_hdr_to_skb calls dev_parse_header_protocol which
needs skb->dev field to be valid.
The line that trigers the bug is in dev_parse_header_protocol
(dev is at offset 0x10 from skb and is stored in RAX register)
if (!dev->header_ops || !dev->header_ops->parse_protocol)
22e1: mov 0x10(%rbx),%rax
22e5: mov 0x230(%rax),%rax
Setting skb->dev before the call in tap.c fixes the issue.
BUG: kernel NULL pointer dereference, address: 0000000000000230
RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap]
Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48
RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010
RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300
RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8
R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6
FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0
Call Trace:
tap_get_user+0x3f1/0x540 [tap]
tap_sendmsg+0x56/0x362 [tap]
? get_tx_bufs+0xc2/0x1e0 [vhost_net]
handle_tx_copy+0x114/0x670 [vhost_net]
handle_tx+0xb0/0xe0 [vhost_net]
handle_tx_kick+0x15/0x20 [vhost_net]
vhost_worker+0x7b/0xc0 [vhost]
? vhost_vring_call_reset+0x40/0x40 [vhost]
kthread+0xfa/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
net: atlantic: fix aq_vec index out of range error
The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.
[ 97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[ 97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[ 97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[ 97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[ 97.937611] Workqueue: events_unbound async_run_entry_fn
[ 97.937616] Call Trace:
[ 97.937617] <TASK>
[ 97.937619] dump_stack_lvl+0x49/0x63
[ 97.937624] dump_stack+0x10/0x16
[ 97.937626] ubsan_epilogue+0x9/0x3f
[ 97.937627] __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 97.937629] ? __scm_send+0x348/0x440
[ 97.937632] ? aq_vec_stop+0x72/0x80 [atlantic]
[ 97.937639] aq_nic_stop+0x1b6/0x1c0 [atlantic]
[ 97.937644] aq_suspend_common+0x88/0x90 [atlantic]
[ 97.937648] aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[ 97.937653] pci_pm_suspend+0x7e/0x1a0
[ 97.937655] ? pci_pm_suspend_noirq+0x2b0/0x2b0
[ 97.937657] dpm_run_callback+0x54/0x190
[ 97.937660] __device_suspend+0x14c/0x4d0
[ 97.937661] async_suspend+0x23/0x70
[ 97.937663] async_run_entry_fn+0x33/0x120
[ 97.937664] process_one_work+0x21f/0x3f0
[ 97.937666] worker_thread+0x4a/0x3c0
[ 97.937668] ? process_one_work+0x3f0/0x3f0
[ 97.937669] kthread+0xf0/0x120
[ 97.937671] ? kthread_complete_and_exit+0x20/0x20
[ 97.937672] ret_from_fork+0x22/0x30
[ 97.937676] </TASK>
v2. fixed "warning: variable 'aq_vec' set but not used"
v3. simplified a for loop
CVSS Score
7.8
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix adminq error handling
iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent
memory for VF mailbox.
Free DMA regions for both ASQ and ARQ in case error happens during
configuration of ASQ/ARQ registers.
Without this change it is possible to see when unloading interface:
74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32]
One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent]
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18