In the Linux kernel, the following vulnerability has been resolved:
gue: Fix skb memleak with inner IP protocol 0.
syzbot reported skb memleak below. [0]
The repro generated a GUE packet with its inner protocol 0.
gue_udp_recv() returns -guehdr->proto_ctype for "resubmit"
in ip_protocol_deliver_rcu(), but this only works with
non-zero protocol number.
Let's drop such packets.
Note that 0 is a valid number (IPv6 Hop-by-Hop Option).
I think it is not practical to encap HOPOPT in GUE, so once
someone starts to complain, we could pass down a resubmit
flag pointer to distinguish two zeros from the upper layer:
* no error
* resubmit HOPOPT
[0]
BUG: memory leak
unreferenced object 0xffff888109695a00 (size 240):
comm "syz.0.17", pid 6088, jiffies 4294943096
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 40 c2 10 81 88 ff ff 00 00 00 00 00 00 00 00 .@..............
backtrace (crc a84b336f):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4958 [inline]
slab_alloc_node mm/slub.c:5263 [inline]
kmem_cache_alloc_noprof+0x3b4/0x590 mm/slub.c:5270
__build_skb+0x23/0x60 net/core/skbuff.c:474
build_skb+0x20/0x190 net/core/skbuff.c:490
__tun_build_skb drivers/net/tun.c:1541 [inline]
tun_build_skb+0x4a1/0xa40 drivers/net/tun.c:1636
tun_get_user+0xc12/0x2030 drivers/net/tun.c:1770
tun_chr_write_iter+0x71/0x120 drivers/net/tun.c:1999
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x45d/0x710 fs/read_write.c:686
ksys_write+0xa7/0x170 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved:
uacce: fix cdev handling in the cleanup path
When cdev_device_add fails, it internally releases the cdev memory,
and if cdev_device_del is then executed, it will cause a hang error.
To fix it, we check the return value of cdev_device_add() and clear
uacce->cdev to avoid calling cdev_device_del in the uacce_remove.
In the Linux kernel, the following vulnerability has been resolved:
migrate: correct lock ordering for hugetlb file folios
Syzbot has found a deadlock (analyzed by Lance Yang):
1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock).
2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire
folio_lock.
migrate_pages()
-> migrate_hugetlbs()
-> unmap_and_move_huge_page() <- Takes folio_lock!
-> remove_migration_ptes()
-> __rmap_walk_file()
-> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)!
hugetlbfs_fallocate()
-> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)!
-> hugetlbfs_zero_partial_page()
-> filemap_lock_hugetlb_folio()
-> filemap_lock_folio()
-> __filemap_get_folio <- Waits for folio_lock!
The migration path is the one taking locks in the wrong order according to
the documentation at the top of mm/rmap.c. So expand the scope of the
existing i_mmap_lock to cover the calls to remove_migration_ptes() too.
This is (mostly) how it used to be after commit c0d0381ade79. That was
removed by 336bf30eb765 for both file & anon hugetlb pages when it should
only have been removed for anon hugetlb pages.
In the Linux kernel, the following vulnerability has been resolved:
netrom: fix double-free in nr_route_frame()
In nr_route_frame(), old_skb is immediately freed without checking if
nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL,
the caller function will free old_skb again, causing a double-free bug.
Therefore, to prevent this, we need to modify it to check whether
nr_neigh->ax25 is NULL before freeing old_skb.
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: fix hugetlb_pmd_shared()
Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using
mmu_gather)", v3.
One functional fix, one performance regression fix, and two related
comment fixes.
I cleaned up my prototype I recently shared [1] for the performance fix,
deferring most of the cleanups I had in the prototype to a later point.
While doing that I identified the other things.
The goal of this patch set is to be backported to stable trees "fairly"
easily. At least patch #1 and #4.
Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing
Patch #2 + #3 are simple comment fixes that patch #4 interacts with.
Patch #4 is a fix for the reported performance regression due to excessive
IPI broadcasts during fork()+exit().
The last patch is all about TLB flushes, IPIs and mmu_gather.
Read: complicated
There are plenty of cleanups in the future to be had + one reasonable
optimization on x86. But that's all out of scope for this series.
Runtime tested, with a focus on fixing the performance regression using
the original reproducer [2] on x86.
This patch (of 4):
We switched from (wrongly) using the page count to an independent shared
count. Now, shared page tables have a refcount of 1 (excluding
speculative references) and instead use ptdesc->pt_share_count to identify
sharing.
We didn't convert hugetlb_pmd_shared(), so right now, we would never
detect a shared PMD table as such, because sharing/unsharing no longer
touches the refcount of a PMD table.
Page migration, like mbind() or migrate_pages() would allow for migrating
folios mapped into such shared PMD tables, even though the folios are not
exclusive. In smaps we would account them as "private" although they are
"shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the
pagemap interface.
Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().
In the Linux kernel, the following vulnerability has been resolved:
leds: led-class: Only Add LED to leds_list when it is fully ready
Before this change the LED was added to leds_list before led_init_core()
gets called adding it the list before led_classdev.set_brightness_work gets
initialized.
This leaves a window where led_trigger_register() of a LED's default
trigger will call led_trigger_set() which calls led_set_brightness()
which in turn will end up queueing the *uninitialized*
led_classdev.set_brightness_work.
This race gets hit by the lenovo-thinkpad-t14s EC driver which registers
2 LEDs with a default trigger provided by snd_ctl_led.ko in quick
succession. The first led_classdev_register() causes an async modprobe of
snd_ctl_led to run and that async modprobe manages to exactly hit
the window where the second LED is on the leds_list without led_init_core()
being called for it, resulting in:
------------[ cut here ]------------
WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390
Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025
...
Call trace:
__flush_work+0x344/0x390 (P)
flush_work+0x2c/0x50
led_trigger_set+0x1c8/0x340
led_trigger_register+0x17c/0x1c0
led_trigger_register_simple+0x84/0xe8
snd_ctl_led_init+0x40/0xf88 [snd_ctl_led]
do_one_initcall+0x5c/0x318
do_init_module+0x9c/0x2b8
load_module+0x7e0/0x998
Close the race window by moving the adding of the LED to leds_list to
after the led_init_core() call.
In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error
In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message.
In the Linux kernel, the following vulnerability has been resolved:
fou: Don't allow 0 for FOU_ATTR_IPPROTO.
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO.
In the Linux kernel, the following vulnerability has been resolved:
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.