Linux: >> Linux Kernel >> 4.14.315 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Pointer may be dereferenced
Klocwork tool reported pointer 'rport' returned from call to function
fc_bsg_to_rport() may be NULL and will be dereferenced.
Add a fix to validate rport before dereferencing.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
md/raid10: prevent soft lockup while flush writes
Currently, there is no limit for raid1/raid10 plugged bio. While flushing
writes, raid1 has cond_resched() while raid10 doesn't, and too many
writes can cause soft lockup.
Follow up soft lockup can be triggered easily with writeback test for
raid10 with ramdisks:
watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293]
Call Trace:
<TASK>
call_rcu+0x16/0x20
put_object+0x41/0x80
__delete_object+0x50/0x90
delete_object_full+0x2b/0x40
kmemleak_free+0x46/0xa0
slab_free_freelist_hook.constprop.0+0xed/0x1a0
kmem_cache_free+0xfd/0x300
mempool_free_slab+0x1f/0x30
mempool_free+0x3a/0x100
bio_free+0x59/0x80
bio_put+0xcf/0x2c0
free_r10bio+0xbf/0xf0
raid_end_bio_io+0x78/0xb0
one_write_done+0x8a/0xa0
raid10_end_write_request+0x1b4/0x430
bio_endio+0x175/0x320
brd_submit_bio+0x3b9/0x9b7 [brd]
__submit_bio+0x69/0xe0
submit_bio_noacct_nocheck+0x1e6/0x5a0
submit_bio_noacct+0x38c/0x7e0
flush_pending_writes+0xf0/0x240
raid10d+0xac/0x1ed0
Fix the problem by adding cond_resched() to raid10 like what raid1 did.
Note that unlimited plugged bio still need to be optimized, for example,
in the case of lots of dirty pages writeback, this will take lots of
memory and io will spend a long time in plug, hence io latency is bad.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix calltrace warning in amddrm_buddy_fini
The following call trace is observed when removing the amdgpu driver, which
is caused by that BOs allocated for psp are not freed until removing.
[61811.450562] RIP: 0010:amddrm_buddy_fini.cold+0x29/0x47 [amddrm_buddy]
[61811.450577] Call Trace:
[61811.450577] <TASK>
[61811.450579] amdgpu_vram_mgr_fini+0x135/0x1c0 [amdgpu]
[61811.450728] amdgpu_ttm_fini+0x207/0x290 [amdgpu]
[61811.450870] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[61811.451012] gmc_v9_0_sw_fini+0x4a/0x60 [amdgpu]
[61811.451166] amdgpu_device_fini_sw+0x117/0x520 [amdgpu]
[61811.451306] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[61811.451447] devm_drm_dev_init_release+0x4d/0x80 [drm]
[61811.451466] devm_action_release+0x15/0x20
[61811.451469] release_nodes+0x40/0xb0
[61811.451471] devres_release_all+0x9b/0xd0
[61811.451473] __device_release_driver+0x1bb/0x2a0
[61811.451476] driver_detach+0xf3/0x140
[61811.451479] bus_remove_driver+0x6c/0xf0
[61811.451481] driver_unregister+0x31/0x60
[61811.451483] pci_unregister_driver+0x40/0x90
[61811.451486] amdgpu_exit+0x15/0x447 [amdgpu]
For smu v13_0_2, if the GPU supports xgmi, refer to
commit f5c7e7797060 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2"),
it will run gpu recover in AMDGPU_RESET_FOR_DEVICE_REMOVE mode when removing,
which makes all devices in hive list have hw reset but no resume except the
basic ip blocks, then other ip blocks will not call .hw_fini according to
ip_block.status.hw.
Since psp_free_shared_bufs just includes some software operations, so move
it to psp_sw_fini.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
drm/meson: remove drm bridges at aggregate driver unbind time
drm bridges added by meson_encoder_hdmi_init and meson_encoder_cvbs_init
were not manually removed at module unload time, which caused dangling
references to freed memory to remain linked in the global bridge_list.
When loading the driver modules back in, the same functions would again
call drm_bridge_add, and when traversing the global bridge_list, would
end up peeking into freed memory.
Once again KASAN revealed the problem:
[ +0.000095] =============================================================
[ +0.000008] BUG: KASAN: use-after-free in __list_add_valid+0x9c/0x120
[ +0.000018] Read of size 8 at addr ffff00003da291f0 by task modprobe/2483
[ +0.000018] CPU: 3 PID: 2483 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000011] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000006] dump_backtrace+0x1ec/0x280
[ +0.000012] show_stack+0x24/0x80
[ +0.000008] dump_stack_lvl+0x98/0xd4
[ +0.000011] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000008] kasan_report+0xb8/0xfc
[ +0.000008] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] __list_add_valid+0x9c/0x120
[ +0.000009] drm_bridge_add+0x6c/0x104 [drm]
[ +0.000165] dw_hdmi_probe+0x1900/0x2360 [dw_hdmi]
[ +0.000022] meson_dw_hdmi_bind+0x520/0x814 [meson_dw_hdmi]
[ +0.000014] component_bind+0x174/0x520
[ +0.000012] component_bind_all+0x1a8/0x38c
[ +0.000010] meson_drv_bind_master+0x5e8/0xb74 [meson_drm]
[ +0.000032] meson_drv_bind+0x20/0x2c [meson_drm]
[ +0.000027] try_to_bring_up_aggregate_device+0x19c/0x390
[ +0.000010] component_master_add_with_match+0x1c8/0x284
[ +0.000009] meson_drv_probe+0x274/0x280 [meson_drm]
[ +0.000026] platform_probe+0xd0/0x220
[ +0.000009] really_probe+0x3ac/0xa80
[ +0.000009] __driver_probe_device+0x1f8/0x400
[ +0.000009] driver_probe_device+0x68/0x1b0
[ +0.000009] __driver_attach+0x20c/0x480
[ +0.000008] bus_for_each_dev+0x114/0x1b0
[ +0.000009] driver_attach+0x48/0x64
[ +0.000008] bus_add_driver+0x390/0x564
[ +0.000009] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000008] meson_drm_platform_driver_init+0x3c/0x1000 [meson_drm]
[ +0.000027] do_one_initcall+0xc4/0x2b0
[ +0.000011] do_init_module+0x154/0x570
[ +0.000011] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000009] __arm64_sys_init_module+0x78/0xb0
[ +0.000009] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000012] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000016] Allocated by task 879:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000011] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc+0x278/0x4a0
[ +0.000011] mpi_resize+0x13c/0x1d0
[ +0.000011] mpi_powm+0xd24/0x1570
[ +0.000009] rsa_enc+0x1a4/0x30c
[ +0.000009] pkcs1pad_verify+0x3f0/0x580
[ +0.000009] public_key_verify_signature+0x7a8/0xba4
[ +0.000010] public_key_verify_signature_2+0x40/0x60
[ +0.000008] verify_signature+0xb4/0x114
[ +0.000008] pkcs7_validate_trust_one.constprop.0+0x3b8/0x574
[ +0.000009] pkcs7_validate_trust+0xb8/0x15c
[ +0.000008] verify_pkcs7_message_sig+0xec/0x1b0
[ +0.000012] verify_pkcs7_signature+0x78/0xac
[ +0.000007] mod_verify_sig+0x110/0x190
[ +0.000009] module_sig_check+0x114/0x1e0
[ +0.000009] load_module+0xa0/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000009] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000008] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64
---truncated---
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Make .remove and .shutdown HW shutdown consistent
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 00000
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
regulator: core: fix use_count leakage when handling boot-on
I found a use_count leakage towards supply regulator of rdev with
boot-on option.
┌───────────────────┐ ┌───────────────────┐
│ regulator_dev A │ │ regulator_dev B │
│ (boot-on) │ │ (boot-on) │
│ use_count=0 │◀──supply──│ use_count=1 │
│ │ │ │
└───────────────────┘ └───────────────────┘
In case of rdev(A) configured with `regulator-boot-on', the use_count
of supplying regulator(B) will increment inside
regulator_enable(rdev->supply).
Thus, B will acts like always-on, and further balanced
regulator_enable/disable cannot actually disable it anymore.
However, B was also configured with `regulator-boot-on', we wish it
could be disabled afterwards.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Fix crash on isr after kexec()
If the system is rebooted via isr(), the IRQ handler might
be triggered before the domain is initialized. Resulting on
an invalid memory access error.
Fix:
[ 0.500930] Unable to handle kernel read from unreadable memory at virtual address 0000000000000070
[ 0.501166] Call trace:
[ 0.501174] report_iommu_fault+0x28/0xfc
[ 0.501180] mtk_iommu_isr+0x10c/0x1c0
[ joro: Fixed spelling in commit message ]
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix use-after-free on source server when doing inter-server copy
Use-after-free occurred when the laundromat tried to free expired
cpntf_state entry on the s2s_cp_stateids list after inter-server
copy completed. The sc_cp_list that the expired copy state was
inserted on was already freed.
When COPY completes, the Linux client normally sends LOCKU(lock_state x),
FREE_STATEID(lock_state x) and CLOSE(open_state y) to the source server.
The nfs4_put_stid call from nfsd4_free_stateid cleans up the copy state
from the s2s_cp_stateids list before freeing the lock state's stid.
However, sometimes the CLOSE was sent before the FREE_STATEID request.
When this happens, the nfsd4_close_open_stateid call from nfsd4_close
frees all lock states on its st_locks list without cleaning up the copy
state on the sc_cp_list list. When the time the FREE_STATEID arrives the
server returns BAD_STATEID since the lock state was freed. This causes
the use-after-free error to occur when the laundromat tries to free
the expired cpntf_state.
This patch adds a call to nfs4_free_cpntf_statelist in
nfsd4_close_open_stateid to clean up the copy state before calling
free_ol_stateid_reaplist to free the lock state's stid on the reaplist.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
btrfs: abort transaction on unexpected eb generation at btrfs_copy_root()
If we find an unexpected generation for the extent buffer we are cloning
at btrfs_copy_root(), we just WARN_ON() and don't error out and abort the
transaction, meaning we allow to persist metadata with an unexpected
generation. Instead of warning only, abort the transaction and return
-EUCLEAN.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15
In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: Remove WARN_ON for device endpoint command timeouts
This commit addresses a rarely observed endpoint command timeout
which causes kernel panic due to warn when 'panic_on_warn' is enabled
and unnecessary call trace prints when 'panic_on_warn' is disabled.
It is seen during fast software-controlled connect/disconnect testcases.
The following is one such endpoint command timeout that we observed:
1. Connect
=======
->dwc3_thread_interrupt
->dwc3_ep0_interrupt
->configfs_composite_setup
->composite_setup
->usb_ep_queue
->dwc3_gadget_ep0_queue
->__dwc3_gadget_ep0_queue
->__dwc3_ep0_do_control_data
->dwc3_send_gadget_ep_cmd
2. Disconnect
==========
->dwc3_thread_interrupt
->dwc3_gadget_disconnect_interrupt
->dwc3_ep0_reset_state
->dwc3_ep0_end_control_data
->dwc3_send_gadget_ep_cmd
In the issue scenario, in Exynos platforms, we observed that control
transfers for the previous connect have not yet been completed and end
transfer command sent as a part of the disconnect sequence and
processing of USB_ENDPOINT_HALT feature request from the host timeout.
This maybe an expected scenario since the controller is processing EP
commands sent as a part of the previous connect. It maybe better to
remove WARN_ON in all places where device endpoint commands are sent to
avoid unnecessary kernel panic due to warn.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-09-15