Linux: >> Linux Kernel >> 6.6.62 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
pds_core: Prevent possible adminq overflow/stuck condition
The pds_core's adminq is protected by the adminq_lock, which prevents
more than 1 command to be posted onto it at any one time. This makes it
so the client drivers cannot simultaneously post adminq commands.
However, the completions happen in a different context, which means
multiple adminq commands can be posted sequentially and all waiting
on completion.
On the FW side, the backing adminq request queue is only 16 entries
long and the retry mechanism and/or overflow/stuck prevention is
lacking. This can cause the adminq to get stuck, so commands are no
longer processed and completions are no longer sent by the FW.
As an initial fix, prevent more than 16 outstanding adminq commands so
there's no way to cause the adminq from getting stuck. This works
because the backing adminq request queue will never have more than 16
pending adminq commands, so it will never overflow. This is done by
reducing the adminq depth to 16.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
fix a couple of races in MNT_TREE_BENEATH handling by do_move_mount()
Normally do_lock_mount(path, _) is locking a mountpoint pinned by
*path and at the time when matching unlock_mount() unlocks that
location it is still pinned by the same thing.
Unfortunately, for 'beneath' case it's no longer that simple -
the object being locked is not the one *path points to. It's the
mountpoint of path->mnt. The thing is, without sufficient locking
->mnt_parent may change under us and none of the locks are held
at that point. The rules are
* mount_lock stabilizes m->mnt_parent for any mount m.
* namespace_sem stabilizes m->mnt_parent, provided that
m is mounted.
* if either of the above holds and refcount of m is positive,
we are guaranteed the same for refcount of m->mnt_parent.
namespace_sem nests inside inode_lock(), so do_lock_mount() has
to take inode_lock() before grabbing namespace_sem. It does
recheck that path->mnt is still mounted in the same place after
getting namespace_sem, and it does take care to pin the dentry.
It is needed, since otherwise we might end up with racing mount --move
(or umount) happening while we were getting locks; in that case
dentry would no longer be a mountpoint and could've been evicted
on memory pressure along with its inode - not something you want
when grabbing lock on that inode.
However, pinning a dentry is not enough - the matching mount is
also pinned only by the fact that path->mnt is mounted on top it
and at that point we are not holding any locks whatsoever, so
the same kind of races could end up with all references to
that mount gone just as we are about to enter inode_lock().
If that happens, we are left with filesystem being shut down while
we are holding a dentry reference on it; results are not pretty.
What we need to do is grab both dentry and mount at the same time;
that makes inode_lock() safe *and* avoids the problem with fs getting
shut down under us. After taking namespace_sem we verify that
path->mnt is still mounted (which stabilizes its ->mnt_parent) and
check that it's still mounted at the same place. From that point
on to the matching namespace_unlock() we are guaranteed that
mount/dentry pair we'd grabbed are also pinned by being the mountpoint
of path->mnt, so we can quietly drop both the dentry reference (as
the current code does) and mnt one - it's OK to do under namespace_sem,
since we are not dropping the final refs.
That solves the problem on do_lock_mount() side; unlock_mount()
also has one, since dentry is guaranteed to stay pinned only until
the namespace_unlock(). That's easy to fix - just have inode_unlock()
done earlier, while it's still pinned by mp->m_dentry.
CVSS Score
4.7
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
net: phy: leds: fix memory leak
A network restart test on a router led to an out-of-memory condition,
which was traced to a memory leak in the PHY LED trigger code.
The root cause is misuse of the devm API. The registration function
(phy_led_triggers_register) is called from phy_attach_direct, not
phy_probe, and the unregister function (phy_led_triggers_unregister)
is called from phy_detach, not phy_remove. This means the register and
unregister functions can be called multiple times for the same PHY
device, but devm-allocated memory is not freed until the driver is
unbound.
This also prevents kmemleak from detecting the leak, as the devm API
internally stores the allocated pointer.
Fix this by replacing devm_kzalloc/devm_kcalloc with standard
kzalloc/kcalloc, and add the corresponding kfree calls in the unregister
path.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
parisc: Fix double SIGFPE crash
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
If dma-coherent property isn't set then descriptors are non-cacheable
and the iocc shareability bits should be disabled. Without this UFS can
end up in an incompatible configuration and suffer from random cache
related stability issues.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
Case values introduced in commit
5f78e1fb7a3e ("ASoC: qcom: Add driver support for audioreach solution")
cause out of bounds access in arrays of sc7280 driver data (e.g. in case
of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()).
Redefine LPASS_MAX_PORTS to consider the maximum possible port id for
q6dsp as sc7280 driver utilizes some of those values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
block: fix resource leak in blk_register_queue() error path
When registering a queue fails after blk_mq_sysfs_register() is
successful but the function later encounters an error, we need
to clean up the blk_mq_sysfs resources.
Add the missing blk_mq_sysfs_unregister() call in the error path
to properly clean up these resources and prevent a memory leak.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
wifi: wl1251: fix memory leak in wl1251_tx_work
The skb dequeued from tx_queue is lost when wl1251_ps_elp_wakeup fails
with a -ETIMEDOUT error. Fix that by queueing the skb back to tx_queue.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: displayport: Fix deadlock
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20