Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Remove redundant css_put() in scx_cgroup_init()
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
net/mana: Null service_wq on setup error to prevent double destroy
In mana_gd_setup() error path, set gc->service_wq to NULL after
destroy_workqueue() to match the cleanup in mana_gd_cleanup().
This prevents a use-after-free if the workqueue pointer is checked
after a failed setup.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
net: bonding: Fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If bonding ARP/NS validation is enabled, an IPv6
NS/NA packet received on a slave can reach bond_validate_na(), which
calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can
crash in __ipv6_chk_addr_and_flags().
BUG: kernel NULL pointer dereference, address: 00000000000005d8
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170
Call Trace:
<IRQ>
ipv6_chk_addr+0x1f/0x30
bond_validate_na+0x12e/0x1d0 [bonding]
? __pfx_bond_handle_frame+0x10/0x10 [bonding]
bond_rcv_validate+0x1a0/0x450 [bonding]
bond_handle_frame+0x5e/0x290 [bonding]
? srso_alias_return_thunk+0x5/0xfbef5
__netif_receive_skb_core.constprop.0+0x3e8/0xe50
? srso_alias_return_thunk+0x5/0xfbef5
? update_cfs_rq_load_avg+0x1a/0x240
? srso_alias_return_thunk+0x5/0xfbef5
? __enqueue_entity+0x5e/0x240
__netif_receive_skb_one_core+0x39/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x30/0x200
? srso_alias_return_thunk+0x5/0xfbef5
net_rx_action+0x338/0x3b0
handle_softirqs+0xc9/0x2a0
do_softirq+0x42/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
__dev_queue_xmit+0x2d3/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? packet_parse_headers+0x10a/0x1a0
packet_sendmsg+0x10da/0x1700
? kick_pool+0x5f/0x140
? srso_alias_return_thunk+0x5/0xfbef5
? __queue_work+0x12d/0x4f0
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to
bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()
and avoid the path to ipv6_chk_addr().
CVSS Score
7.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix physical SQE bounds check for SQE_MIXED 128-byte ops
When IORING_SETUP_SQE_MIXED is used without IORING_SETUP_NO_SQARRAY,
the boundary check for 128-byte SQE operations in io_init_req()
validated the logical SQ head position rather than the physical SQE
index.
The existing check:
!(ctx->cached_sq_head & (ctx->sq_entries - 1))
ensures the logical position isn't at the end of the ring, which is
correct for NO_SQARRAY rings where physical == logical. However, when
sq_array is present, an unprivileged user can remap any logical
position to an arbitrary physical index via sq_array. Setting
sq_array[N] = sq_entries - 1 places a 128-byte operation at the last
physical SQE slot, causing the 128-byte memcpy in
io_uring_cmd_sqe_copy() to read 64 bytes past the end of the SQE
array.
Replace the cached_sq_head alignment check with a direct validation
of the physical SQE index, which correctly handles both sq_array and
NO_SQARRAY cases.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-mach-common: Add missing error check for clock acquisition
The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not
check the return values of clk_get(). This could lead to a kernel crash
when the invalid pointers are later dereferenced by clock core
functions.
Fix this by:
1. Changing clk_get() to the device-managed devm_clk_get().
2. Adding IS_ERR() checks immediately after each clock acquisition.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unreserve bo if queue update failed
Error handling path should unreserve bo then return failed.
(cherry picked from commit c24afed7de9ecce341825d8ab55a43a254348b33)
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e
driver")
Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")
Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of
unsigned in *_tx_map()") fixed the infinite loop, but introduced the
off-by-one error.
This issue may still exist in the igbvf driver, but I did not address it
in this patch.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts
The usbtmc driver accepts timeout values specified by the user in an
ioctl command, and uses these timeouts for some usb_bulk_msg() calls.
Since the user can specify arbitrarily long timeouts and
usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable()
instead to avoid the possibility of the user hanging a kernel thread
indefinitely.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
usb: yurex: fix race in probe
The bbu member of the descriptor must be set to the value
standing for uninitialized values before the URB whose
completion handler sets bbu is submitted. Otherwise there is
a window during which probing can overwrite already retrieved
data.
CVSS Score
4.7
EPSS Score
0.0
Published
2026-05-08