Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conncount: update last_gc only when GC has been performed
Currently last_gc is being updated everytime a new connection is
tracked, that means that it is updated even if a GC wasn't performed.
With a sufficiently high packet rate, it is possible to always bypass
the GC, causing the list to grow infinitely.
Update the last_gc value only when a GC has been actually performed.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-02-14
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early read unlock of page with EOF in middle
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread.
CVSS Score
7.1
EPSS Score
0.0
Published
2026-02-14
In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: invalidate stale IOTLB entries for kernel address space
Introduce a new IOMMU interface to flush IOTLB paging cache entries for
the CPU kernel address space. This interface is invoked from the x86
architecture code that manages combined user and kernel page tables,
specifically before any kernel page table page is freed and reused.
This addresses the main issue with vfree() which is a common occurrence
and can be triggered by unprivileged users. While this resolves the
primary problem, it doesn't address some extremely rare case related to
memory unplug of memory that was present as reserved memory at boot, which
cannot be triggered by unprivileged users. The discussion can be found at
the link below.
Enable SVA on x86 architecture since the IOMMU can now receive
notification to flush the paging cache before freeing the CPU kernel page
table pages.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-02-14
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dead lock while flushing management frames
Commit [1] converted the management transmission work item into a
wiphy work. Since a wiphy work can only run under wiphy lock
protection, a race condition happens in below scenario:
1. a management frame is queued for transmission.
2. ath12k_mac_op_flush() gets called to flush pending frames associated
with the hardware (i.e, vif being NULL). Then in ath12k_mac_flush()
the process waits for the transmission done.
3. Since wiphy lock has been taken by the flush process, the transmission
work item has no chance to run, hence the dead lock.
>From user view, this dead lock results in below issue:
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticate with xxxxxx (local address=xxxxxx)
wlp8s0: send auth to xxxxxx (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with xxxxxx (try 1/3)
wlp8s0: aborting association with xxxxxx by local choice (Reason: 3=DEAUTH_LEAVING)
ath12k_pci 0000:08:00.0: failed to flush mgmt transmit queue, mgmt pkts pending 1
The dead lock can be avoided by invoking wiphy_work_flush() to proactively
run the queued work item. Note actually it is already present in
ath12k_mac_op_flush(), however it does not protect the case where vif
being NULL. Hence move it ahead to cover this case as well.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
CVSS Score
5.5
EPSS Score
0.0
Published
2026-02-14
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes.
CVSS Score
5.5
EPSS Score
0.0
Published
2026-02-14
Caido is a web security auditing toolkit. Prior to 0.55.0, Caido blocks non whitelisted domains to reach out through the 8080 port, and shows Host/IP is not allowed to connect to Caido on all endpoints. But this is bypassable by injecting a X-Forwarded-Host: 127.0.0.1:8080 header. This vulnerability is fixed in 0.55.0.
CVSS Score
8.1
EPSS Score
0.001
Published
2026-02-13
Known is a social publishing platform. Prior to 1.6.3, a Critical Broken Authentication vulnerability exists in Known 1.6.2 and earlier. The application leaks the password reset token within a hidden HTML input field on the password reset page. This allows any unauthenticated attacker to retrieve the reset token for any user by simply querying the user's email, leading to full Account Takeover (ATO) without requiring access to the victim's email inbox. This vulnerability is fixed in 1.6.3.
CVSS Score
9.8
EPSS Score
0.002
Published
2026-02-13
LavaLite CMS 10.1.0 is vulnerable to Incorrect Access Control. An authenticated user with low-level privileges (User role) can directly access the admin backend by logging in through /admin/login. The vulnerability exists because the admin and user authentication guards share the same user provider without role-based access control verification.
CVSS Score
8.8
EPSS Score
0.0
Published
2026-02-13
Calero VeraSMART versions prior to 2022 R1 expose an unauthenticated .NET Remoting HTTP service on TCP port 8001. The service publishes default ObjectURIs (including EndeavorServer.rem and RemoteFileReceiver.rem) and permits the use of SOAP and binary formatters with TypeFilterLevel set to Full. An unauthenticated remote attacker can invoke the exposed remoting endpoints to perform arbitrary file read and write operations via the WebClient class. This allows retrieval of sensitive files such as WebRoot\\web.config, which may disclose IIS machineKey validation and decryption keys. An attacker can use these keys to generate a malicious ASP.NET ViewState payload and achieve remote code execution within the IIS application context. Additionally, supplying a UNC path can trigger outbound SMB authentication from the service account, potentially exposing NTLMv2 hashes for relay or offline cracking.
CVSS Score
9.8
EPSS Score
0.002
Published
2026-02-13
Calero VeraSMART versions prior to 2026 R1 contain hardcoded static AES encryption keys within Veramark.Framework.dll (Veramark.Core.Config class). These keys are used to encrypt the password of the service account stored in C:\\VeraSMART Data\\app.settings. An attacker with local access to the system can extract the hardcoded keys from the Veramark.Framework.dll module and decrypt the stored credentials. The recovered credentials can then be used to authenticate to the Windows host, potentially resulting in local privilege escalation depending on the privileges of the configured service account.
CVSS Score
7.8
EPSS Score
0.0
Published
2026-02-13