Linux: >> Linux Kernel >> 2.6.16.18 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate zero num_subauth before sub_auth is accessed
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix session use-after-free in multichannel connection
There is a race condition between session setup and
ksmbd_sessions_deregister. The session can be freed before the connection
is added to channel list of session.
This patch check reference count of session before freeing it.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_sessions_deregister()
In multichannel mode, UAF issue can occur in session_deregister
when the second channel sets up a session through the connection of
the first channel. session that is freed through the global session
table can be accessed again through ->sessions of connection.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
nfsd: put dl_stid if fail to queue dl_recall
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't ignore the return code of svc_proc_register()
Currently, nfsd_proc_stat_init() ignores the return value of
svc_proc_register(). If the procfile creation fails, then the kernel
will WARN when it tries to remove the entry later.
Fix nfsd_proc_stat_init() to return the same type of pointer as
svc_proc_register(), and fix up nfsd_net_init() to check that and fail
the nfsd_net construction if it occurs.
svc_proc_register() can fail if the dentry can't be allocated, or if an
identical dentry already exists. The second case is pretty unlikely in
the nfsd_net construction codepath, so if this happens, return -ENOMEM.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before truncation in jfs_truncate_nolock()
Added a check for "read-only" mode in the `jfs_truncate_nolock`
function to avoid errors related to writing to a read-only
filesystem.
Call stack:
block_write_begin() {
jfs_write_failed() {
jfs_truncate() {
jfs_truncate_nolock() {
txEnd() {
...
log = JFS_SBI(tblk->sb)->log;
// (log == NULL)
If the `isReadOnly(ip)` condition is triggered in
`jfs_truncate_nolock`, the function execution will stop, and no
further data modification will occur. Instead, the `xtTruncate`
function will be called with the "COMMIT_WMAP" flag, preventing
modifications in "read-only" mode.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
jfs: add check read-only before txBeginAnon() call
Added a read-only check before calling `txBeginAnon` in `extAlloc`
and `extRecord`. This prevents modification attempts on a read-only
mounted filesystem, avoiding potential errors or crashes.
Call trace:
txBeginAnon+0xac/0x154
extAlloc+0xe8/0xdec fs/jfs/jfs_extent.c:78
jfs_get_block+0x340/0xb98 fs/jfs/inode.c:248
__block_write_begin_int+0x580/0x166c fs/buffer.c:2128
__block_write_begin fs/buffer.c:2177 [inline]
block_write_begin+0x98/0x11c fs/buffer.c:2236
jfs_write_begin+0x44/0x88 fs/jfs/inode.c:299
CVSS Score
5.5
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
usb: xhci: Apply the link chain quirk on NEC isoc endpoints
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No ne
---truncated---
CVSS Score
7.8
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
atm: Fix NULL pointer dereference
When MPOA_cache_impos_rcvd() receives the msg, it can trigger
Null Pointer Dereference Vulnerability if both entry and
holding_time are NULL. Because there is only for the situation
where entry is NULL and holding_time exists, it can be passed
when both entry and holding_time are NULL. If these are NULL,
the entry will be passd to eg_cache_put() as parameter and
it is referenced by entry->use code in it.
kasan log:
[ 3.316691] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006:I
[ 3.317568] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 3.318188] CPU: 3 UID: 0 PID: 79 Comm: ex Not tainted 6.14.0-rc2 #102
[ 3.318601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 3.319298] RIP: 0010:eg_cache_remove_entry+0xa5/0x470
[ 3.319677] Code: c1 f7 6e fd 48 c7 c7 00 7e 38 b2 e8 95 64 54 fd 48 c7 c7 40 7e 38 b2 48 89 ee e80
[ 3.321220] RSP: 0018:ffff88800583f8a8 EFLAGS: 00010006
[ 3.321596] RAX: 0000000000000006 RBX: ffff888005989000 RCX: ffffffffaecc2d8e
[ 3.322112] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000030
[ 3.322643] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6558b88
[ 3.323181] R10: 0000000000000003 R11: 203a207972746e65 R12: 1ffff11000b07f15
[ 3.323707] R13: dffffc0000000000 R14: ffff888005989000 R15: ffff888005989068
[ 3.324185] FS: 000000001b6313c0(0000) GS:ffff88806d380000(0000) knlGS:0000000000000000
[ 3.325042] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3.325545] CR2: 00000000004b4b40 CR3: 000000000248e000 CR4: 00000000000006f0
[ 3.326430] Call Trace:
[ 3.326725] <TASK>
[ 3.326927] ? die_addr+0x3c/0xa0
[ 3.327330] ? exc_general_protection+0x161/0x2a0
[ 3.327662] ? asm_exc_general_protection+0x26/0x30
[ 3.328214] ? vprintk_emit+0x15e/0x420
[ 3.328543] ? eg_cache_remove_entry+0xa5/0x470
[ 3.328910] ? eg_cache_remove_entry+0x9a/0x470
[ 3.329294] ? __pfx_eg_cache_remove_entry+0x10/0x10
[ 3.329664] ? console_unlock+0x107/0x1d0
[ 3.329946] ? __pfx_console_unlock+0x10/0x10
[ 3.330283] ? do_syscall_64+0xa6/0x1a0
[ 3.330584] ? entry_SYSCALL_64_after_hwframe+0x47/0x7f
[ 3.331090] ? __pfx_prb_read_valid+0x10/0x10
[ 3.331395] ? down_trylock+0x52/0x80
[ 3.331703] ? vprintk_emit+0x15e/0x420
[ 3.331986] ? __pfx_vprintk_emit+0x10/0x10
[ 3.332279] ? down_trylock+0x52/0x80
[ 3.332527] ? _printk+0xbf/0x100
[ 3.332762] ? __pfx__printk+0x10/0x10
[ 3.333007] ? _raw_write_lock_irq+0x81/0xe0
[ 3.333284] ? __pfx__raw_write_lock_irq+0x10/0x10
[ 3.333614] msg_from_mpoad+0x1185/0x2750
[ 3.333893] ? __build_skb_around+0x27b/0x3a0
[ 3.334183] ? __pfx_msg_from_mpoad+0x10/0x10
[ 3.334501] ? __alloc_skb+0x1c0/0x310
[ 3.334809] ? __pfx___alloc_skb+0x10/0x10
[ 3.335283] ? _raw_spin_lock+0xe0/0xe0
[ 3.335632] ? finish_wait+0x8d/0x1e0
[ 3.335975] vcc_sendmsg+0x684/0xba0
[ 3.336250] ? __pfx_vcc_sendmsg+0x10/0x10
[ 3.336587] ? __pfx_autoremove_wake_function+0x10/0x10
[ 3.337056] ? fdget+0x176/0x3e0
[ 3.337348] __sys_sendto+0x4a2/0x510
[ 3.337663] ? __pfx___sys_sendto+0x10/0x10
[ 3.337969] ? ioctl_has_perm.constprop.0.isra.0+0x284/0x400
[ 3.338364] ? sock_ioctl+0x1bb/0x5a0
[ 3.338653] ? __rseq_handle_notify_resume+0x825/0xd20
[ 3.339017] ? __pfx_sock_ioctl+0x10/0x10
[ 3.339316] ? __pfx___rseq_handle_notify_resume+0x10/0x10
[ 3.339727] ? selinux_file_ioctl+0xa4/0x260
[ 3.340166] __x64_sys_sendto+0xe0/0x1c0
[ 3.340526] ? syscall_exit_to_user_mode+0x123/0x140
[ 3.340898] do_syscall_64+0xa6/0x1a0
[ 3.341170] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 3.341533] RIP: 0033:0x44a380
[ 3.341757] Code: 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c00
[
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-04-16
In the Linux kernel, the following vulnerability has been resolved:
regulator: check that dummy regulator has been probed before using it
Due to asynchronous driver probing there is a chance that the dummy
regulator hasn't already been probed when first accessing it.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-04-08