Zephyrproject: >> Zephyr >> 3.7.0 Security Vulnerabilities
bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x09 followed by a 2-byte attribute ID) causes a one-byte read past the end of the logical buffer. The parser is reachable from inbound, remote-controlled data: a Bluetooth BR/EDR peer acting as an SDP server returns discovery-response records that are stored verbatim in the client receive buffer and parsed via the public bt_sdp_get_attr()/bt_sdp_has_attr()/bt_sdp_record_parse() helpers. The over-read is bounded to a single byte that is used only as an internal length selector and is never leaked to the attacker; subsequent length checks then reject the malformed record. Realistic impact is therefore limited to an edge-case denial of service (a fault only if the record ends exactly at a mapped-memory boundary, or a deterministic assert panic when CONFIG_ASSERT=y). Affects Zephyr v4.3.0 and v4.4.0; fixed by adding sizeof(type) to the length check.
CVSS Score
7.1
EPSS Score
0.003
Published
2026-06-23
bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The flaw affects ISO receive builds (CONFIG_BT_ISO_RX, selected by the default-off LE Audio options BT_ISO_PERIPHERAL/BT_ISO_CENTRAL/BT_ISO_SYNC_RECEIVER) and has existed since the ISO subsystem was introduced (v2.6.0) through v4.4.0. The fix adds explicit buf->len < sizeof(ts_hdr) and buf->len < sizeof(hdr) checks that drop the buffer before pulling.
CVSS Score
7.1
EPSS Score
0.002
Published
2026-06-23
Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf->ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of struct bt_hfp_hf. Because the parser places no cap on the number of +CIND: list entries, a remote Attendant Gateway (a malicious, compromised, or spoofed peer the device connects to over Bluetooth) can send a response with more than 20 recognized indicator entries and drive index arbitrarily large, writing a small attacker-positioned value past the array into adjacent struct fields (feature masks, SDP/version state, the calls[] array, work/atomic bookkeeping) and potentially beyond the static connection pool slot. This yields memory corruption and at least denial of service of the Bluetooth host, triggered by a single malformed AT response with no user interaction. The sibling consumer ag_indicator_handle_values() already performed the equivalent bounds check; this commit adds the same index >= ARRAY_SIZE(hf->ind_table) guard to close the gap. Affects builds with CONFIG_BT_HFP_HF enabled; introduced with the original HFP HF CIND parser (~v1.7) and present through v4.4.0.
CVSS Score
7.1
EPSS Score
0.003
Published
2026-06-17
In Zephyr's native IPv4 stack, icmpv4_handle_echo_request() in subsys/net/ip/icmpv4.c builds an echo-reply packet (reply), hands it to net_try_send_data(), and then, on success, calls net_stats_update_icmp_sent(net_pkt_iface(reply)). net_try_send_data() transfers ownership of reply to the TX path (net_if_try_queue_tx -> net_if_tx -> L2/driver send, or the asynchronous net_if_tx_thread), which can unref it to refcount 0 and return the struct net_pkt to its slab (net_pkt_unref -> k_mem_slab_free) before the stats line runs. net_core.c documents this exact contract ('the pkt might contain garbage already ... do not use pkt after that call').
The post-send net_pkt_iface(reply) therefore reads reply->iface out of a freed (and possibly already reallocated) net_pkt, a use-after-free read; with CONFIG_NET_STATISTICS_PER_INTERFACE the stats macro additionally increments a counter through that value, i.e. a dereference/write through a stale or recycled-slot pointer.
The path is reached unauthenticated by any remote host that pings the device (net_icmpv4_input -> net_icmp_call_ipv4_handlers -> icmpv4_handle_echo_request) and is gated on CONFIG_NET_STATISTICS_ICMP. Impact is a probabilistic read of recycled packet memory plus a possible wild-pointer write under a timing race, leading most likely to corrupted interface statistics or a remotely triggerable crash (DoS).
The defect was introduced in 2019 (v1.14) and is present through v4.4.0. The companion change in net_icmpv4_send_error() is not a use-after-free because it reads net_pkt_iface(orig), the caller-owned received packet, which stays alive across the send. The fix caches the interface pointer from the live received packet before sending and uses it for the post-send stats updates.
CVSS Score
4.8
EPSS Score
0.002
Published
2026-06-16
Zephyr's IPv6 Neighbor Discovery send paths (net_ipv6_send_na, net_ipv6_send_ns, net_ipv6_send_rs in subsys/net/ip/ipv6_nbr.c) updated the per-interface ICMP-sent statistics by calling net_pkt_iface(pkt) after net_send_data(pkt) had already returned successfully. On the success path the network stack owns and releases the packet's reference (the L2/driver send unrefs it, e.g. ethernet_send -> net_pkt_unref), so for a freshly allocated packet with refcount 1 the net_pkt slab block can be freed before the statistics line runs (synchronously when no TX queue thread is configured, or via a concurrent TX thread otherwise).
The subsequent net_pkt_iface(pkt) reads pkt->iface from the freed slab block, and with CONFIG_NET_STATISTICS_PER_INTERFACE enabled that loaded pointer is dereferenced to increment iface->stats.icmp.sent, a use-after-free (CWE-416). If the slab block was reallocated in the meantime the read/increment targets unrelated or attacker-influenced memory, yielding corrupted statistics, a fault/crash (denial of service), or potential limited memory corruption.
The vulnerable Neighbor Advertisement path is reachable by any unauthenticated on-link node simply by sending ICMPv6 Neighbor Solicitations to a Zephyr node with native IPv6 enabled (handle_ns_input -> net_ipv6_send_na).
Affected from v3.3.0 through v4.4.0; the fix uses the already-available iface argument instead of touching the sent packet. Configurations without per-interface statistics dereference only a global counter and are not affected by the memory-safety aspect.
CVSS Score
4.2
EPSS Score
0.004
Published
2026-06-16
In Zephyr's IPv4 IGMP implementation, igmp_send() in subsys/net/ip/igmp.c read the network interface back out of the packet via net_pkt_iface(pkt) after the packet had been handed to net_send_data(). On the successful-send path the packet's last reference may already have been released by the L2 driver or by the network stack's TX handling (synchronously in the default NET_TC_TX_COUNT=0 immediate-transmit configuration), returning the net_pkt slab block to its free list. The subsequent net_pkt_iface(pkt) dereferences the freed packet, a use-after-free read; with CONFIG_NET_STATISTICS_PER_INTERFACE the resulting dangling interface pointer is further dereferenced for a statistics-counter write.
The IGMP send path is reachable without authentication from inbound IPv4 IGMP membership queries addressed to 224.0.0.1 (net_ipv4_igmp_input -> send_igmp_report/send_igmp_v3_report -> igmp_send), as well as from local multicast join/leave/rejoin operations.
Realistic impact is undefined behavior and potential denial of service (sporadic crash or stats corruption); a controllable write requires the asynchronous TX path plus a concurrent slab reuse.
The flaw was introduced with IGMPv2 support and affects releases from v2.6.0 through v4.4.0. The fix caches the interface pointer before sending. Note the analogous IPv6 MLD path (mld_send in subsys/net/ip/ipv6_mld.c) retains the same unfixed pattern.
CVSS Score
3.7
EPSS Score
0.003
Published
2026-06-16
subsys/net/ip/ipv6_mld.c:mld_send() read the packet interface via net_pkt_iface(pkt) after net_send_data(pkt) returned successfully. Per the network stack's ownership contract (include/zephyr/net/net_core.h, and the explicit warning in subsys/net/ip/net_core.c:453-460 'do not use pkt after that call'), a successful send transfers ownership of the net_pkt and the L2 driver frees it (e.g. ethernet_send() unrefs the packet on success, subsys/net/l2/ethernet/ethernet.c:790), returning it to its k_mem_slab.
The subsequent net_pkt_iface(pkt) is therefore a read of a freed object; the recovered interface pointer is then dereferenced and incremented by the per-interface statistics path (net_stats.h UPDATE_STAT/SET_STAT) when CONFIG_NET_STATISTICS_PER_INTERFACE is enabled. If the freed slot is concurrently reallocated, pkt->iface may read back as NULL (NULL-pointer dereference / crash) or as a stale/garbage pointer (stray increment write / memory corruption).
The path is reachable remotely on the local link without authentication: handle_mld_query() (registered for NET_ICMPV6_MLD_QUERY) responds to a valid MLDv2 General Query (unspecified multicast address, hop limit 1) by calling send_mld_report() -> mld_send().
The result is a remotely triggerable denial of service of the networking stack, with a narrow possibility of memory corruption. The fix caches the interface in a local before sending and no longer touches the packet after net_send_data(). The IPv4/IGMP sibling (igmp_send) already used the corrected pattern.
CVSS Score
5.9
EPSS Score
0.003
Published
2026-06-16
Zephyr's native TCP stack iterates the global connection list in net_tcp_foreach() (subsys/net/ip/tcp.c) using the SYS_SLIST_FOR_EACH_CONTAINER_SAFE macro, which caches a pointer to the next list node. Prior to this fix the function released tcp_lock while invoking the per-connection callback and re-acquired it afterwards.
During that window a concurrent tcp_conn_release(), running on the dedicated TCP work-queue thread when a connection's reference count drops to zero (e.g. a remote peer closing or resetting the connection), can remove and k_mem_slab_free() the cached next connection. When the iterator advances it dereferences the freed (and possibly reallocated) slab memory — a use-after-free that can crash the system (denial of service) and, if the slot has been reused, cause the callback to operate on an attacker-influenced object (potential information disclosure or further fault).
net_tcp_foreach() is reached in production via the net conn network shell command and via net_tcp_close_all_for_iface() on interface-down; the freeing side is driven by ordinary TCP traffic.
The fix moves the connection/context teardown in tcp_conn_release() inside the tcp_lock critical section and keeps tcp_lock held across the callback in net_tcp_foreach(). The defect was introduced with the modern (TCP2) stack in 2020 and affects releases up to and including v4.4.0.
CVSS Score
4.8
EPSS Score
0.003
Published
2026-06-15
A remote, unauthenticated BLE peer can trigger a 2-byte out-of-bounds write in the Bluetooth host during L2CAP LE CoC SDU reassembly. When the application enables segmentation (via chan_ops.alloc_buf) and the chosen RX pool has a user_data_size smaller than 2 bytes, the segmentation counter stored in the net_buf user_data area is written out of bounds in l2cap_chan_le_recv_seg (subsys/bluetooth/host/l2cap.c). The observed effects are an AddressSanitizer abort and, without ASan, heap corruption / fatal error.
CVSS Score
7.6
EPSS Score
0.005
Published
2026-06-09
A remote, unauthenticated attacker can trigger memory corruption in Zephyr's HTTP server WebSocket upgrade path by sending a crafted Sec-WebSocket-Key header. The HTTP/1 header parser copies the header into a fixed-size buffer using a bounded copy that does not guarantee NUL termination when the input length reaches the buffer size. During upgrade handling the buffer is copied to a local stack buffer and passed to strlen(); if no NUL exists in-bounds, strlen() reads beyond the stack buffer and subsequent concatenation with the WebSocket magic string can write out of bounds. This leads to out-of-bounds read and write on stack memory, resulting in crash (denial of service) and potentially code execution. The path is reachable when CONFIG_HTTP_SERVER_WEBSOCKET is enabled.
CVSS Score
9.8
EPSS Score
0.006
Published
2026-06-09