Linux: >> Linux Kernel >> 2.6.16.29 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
ext4: don't set SB_RDONLY after filesystem errors
When the filesystem is mounted with errors=remount-ro, we were setting
SB_RDONLY flag to stop all filesystem modifications. We knew this misses
proper locking (sb->s_umount) and does not go through proper filesystem
remount procedure but it has been the way this worked since early ext2
days and it was good enough for catastrophic situation damage
mitigation. Recently, syzbot has found a way (see link) to trigger
warnings in filesystem freezing because the code got confused by
SB_RDONLY changing under its hands. Since these days we set
EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all
filesystem modifications, modifying SB_RDONLY shouldn't be needed. So
stop doing that.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
x86/entry_32: Clear CPU buffers after register restore in NMI return
CPU buffers are currently cleared after call to exc_nmi, but before
register state is restored. This may be okay for MDS mitigation but not for
RDFS. Because RDFS mitigation requires CPU buffers to be cleared when
registers don't have any sensitive data.
Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI.
CVSS Score
7.1
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: ocelot: fix system hang on level based interrupts
The current implementation only calls chained_irq_enter() and
chained_irq_exit() if it detects pending interrupts.
```
for (i = 0; i < info->stride; i++) {
uregmap_read(info->map, id_reg + 4 * i, ®);
if (!reg)
continue;
chained_irq_enter(parent_chip, desc);
```
However, in case of GPIO pin configured in level mode and the parent
controller configured in edge mode, GPIO interrupt might be lowered by the
hardware. In the result, if the interrupt is short enough, the parent
interrupt is still pending while the GPIO interrupt is cleared;
chained_irq_enter() never gets called and the system hangs trying to
service the parent interrupt.
Moving chained_irq_enter() and chained_irq_exit() outside the for loop
ensures that they are called even when GPIO interrupt is lowered by the
hardware.
The similar code with chained_irq_enter() / chained_irq_exit() functions
wrapping interrupt checking loop may be found in many other drivers:
```
grep -r -A 10 chained_irq_enter drivers/pinctrl
```
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix a UBSAN warning in DML2.1
When programming phantom pipe, since cursor_width is explicity set to 0,
this causes calculation logic to trigger overflow for an unsigned int
triggering the kernel's UBSAN check as below:
[ 40.962845] UBSAN: shift-out-of-bounds in /tmp/amd.EfpumTkO/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:3312:34
[ 40.962849] shift exponent 4294967170 is too large for 32-bit type 'unsigned int'
[ 40.962852] CPU: 1 PID: 1670 Comm: gnome-shell Tainted: G W OE 6.5.0-41-generic #41~22.04.2-Ubuntu
[ 40.962854] Hardware name: Gigabyte Technology Co., Ltd. X670E AORUS PRO X/X670E AORUS PRO X, BIOS F21 01/10/2024
[ 40.962856] Call Trace:
[ 40.962857] <TASK>
[ 40.962860] dump_stack_lvl+0x48/0x70
[ 40.962870] dump_stack+0x10/0x20
[ 40.962872] __ubsan_handle_shift_out_of_bounds+0x1ac/0x360
[ 40.962878] calculate_cursor_req_attributes.cold+0x1b/0x28 [amdgpu]
[ 40.963099] dml_core_mode_support+0x6b91/0x16bc0 [amdgpu]
[ 40.963327] ? srso_alias_return_thunk+0x5/0x7f
[ 40.963331] ? CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport+0x18b8/0x2790 [amdgpu]
[ 40.963534] ? srso_alias_return_thunk+0x5/0x7f
[ 40.963536] ? dml_core_mode_support+0xb3db/0x16bc0 [amdgpu]
[ 40.963730] dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu]
[ 40.963906] ? srso_alias_return_thunk+0x5/0x7f
[ 40.963909] ? dml2_core_calcs_mode_support_ex+0x2c/0x90 [amdgpu]
[ 40.964078] core_dcn4_mode_support+0x72/0xbf0 [amdgpu]
[ 40.964247] dml2_top_optimization_perform_optimization_phase+0x1d3/0x2a0 [amdgpu]
[ 40.964420] dml2_build_mode_programming+0x23d/0x750 [amdgpu]
[ 40.964587] dml21_validate+0x274/0x770 [amdgpu]
[ 40.964761] ? srso_alias_return_thunk+0x5/0x7f
[ 40.964763] ? resource_append_dpp_pipes_for_plane_composition+0x27c/0x3b0 [amdgpu]
[ 40.964942] dml2_validate+0x504/0x750 [amdgpu]
[ 40.965117] ? dml21_copy+0x95/0xb0 [amdgpu]
[ 40.965291] ? srso_alias_return_thunk+0x5/0x7f
[ 40.965295] dcn401_validate_bandwidth+0x4e/0x70 [amdgpu]
[ 40.965491] update_planes_and_stream_state+0x38d/0x5c0 [amdgpu]
[ 40.965672] update_planes_and_stream_v3+0x52/0x1e0 [amdgpu]
[ 40.965845] ? srso_alias_return_thunk+0x5/0x7f
[ 40.965849] dc_update_planes_and_stream+0x71/0xb0 [amdgpu]
Fix this by adding a guard for checking cursor width before triggering
the size calculation.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request()
Use raw_smp_processor_id() instead of plain smp_processor_id() in
do_service_request(), otherwise we may get some errors with the driver
enabled:
BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208
caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
fbdev: sisfb: Fix strbuf array overflow
The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
Deleting an NPIV instance requires all fabric ndlps to be released before
an NPIV's resources can be torn down. Failure to release fabric ndlps
beforehand opens kref imbalance race conditions. Fix by forcing the DA_ID
to complete synchronously with usage of wait_queue.
CVSS Score
4.7
EPSS Score
0.0
Published
2024-11-08
In the Linux kernel, the following vulnerability has been resolved:
net: systemport: fix potential memory leak in bcm_sysport_xmit()
The bcm_sysport_xmit() returns NETDEV_TX_OK without freeing skb
in case of dma_map_single() fails, add dev_kfree_skb() to fix it.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-07
In the Linux kernel, the following vulnerability has been resolved:
net/sun3_82586: fix potential memory leak in sun3_82586_send_packet()
The sun3_82586_send_packet() returns NETDEV_TX_OK without freeing skb
in case of skb->len being too long, add dev_kfree_skb() to fix it.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-07
In the Linux kernel, the following vulnerability has been resolved:
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
This expands the validation introduced in commit 07bf7908950a ("xfrm:
Validate address prefix lengths in the xfrm selector.")
syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET
Because of the AF_UNSPEC selector, verify_newsa_info doesn't put
limits on prefixlen_{s,d}. But then copy_from_user_state sets
x->sel.family to usersa.family (AF_INET). Do the same conversion in
verify_newsa_info before validating prefixlen_{s,d}, since that's how
prefixlen is going to be used later on.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-07