Security Vulnerabilities
- CVEs Published In 2024
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: fix potential array underflow in ucsi_ccg_sync_control()
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow.
In the Linux kernel, the following vulnerability has been resolved:
phy: realtek: usb: fix NULL deref in rtk_usb3phy_probe
In rtk_usb3phy_probe() devm_kzalloc() may return NULL
but this returned value is not checked.
In the Linux kernel, the following vulnerability has been resolved:
phy: realtek: usb: fix NULL deref in rtk_usb2phy_probe
In rtk_usb2phy_probe() devm_kzalloc() may return NULL
but this returned value is not checked.
In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix use-after-free of nreq in reqsk_timer_handler().
The cited commit replaced inet_csk_reqsk_queue_drop_and_put() with
__inet_csk_reqsk_queue_drop() and reqsk_put() in reqsk_timer_handler().
Then, oreq should be passed to reqsk_put() instead of req; otherwise
use-after-free of nreq could happen when reqsk is migrated but the
retry attempt failed (e.g. due to timeout).
Let's pass oreq to reqsk_put().
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix possible deadlocks
This fixes possible deadlocks like the following caused by
hci_cmd_sync_dequeue causing the destroy function to run:
INFO: task kworker/u19:0:143 blocked for more than 120 seconds.
Tainted: G W O 6.8.0-2024-03-19-intel-next-iLS-24ww14 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u19:0 state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
__schedule+0x374/0xaf0
schedule+0x3c/0xf0
schedule_preempt_disabled+0x1c/0x30
__mutex_lock.constprop.0+0x3ef/0x7a0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3c/0x50
mgmt_set_connectable_complete+0xa4/0x150 [bluetooth]
? kfree+0x211/0x2a0
hci_cmd_sync_dequeue+0xae/0x130 [bluetooth]
? __pfx_cmd_complete_rsp+0x10/0x10 [bluetooth]
cmd_complete_rsp+0x26/0x80 [bluetooth]
mgmt_pending_foreach+0x4d/0x70 [bluetooth]
__mgmt_power_off+0x8d/0x180 [bluetooth]
? _raw_spin_unlock_irq+0x23/0x40
hci_dev_close_sync+0x445/0x5b0 [bluetooth]
hci_set_powered_sync+0x149/0x250 [bluetooth]
set_powered_sync+0x24/0x60 [bluetooth]
hci_cmd_sync_work+0x90/0x150 [bluetooth]
process_one_work+0x13e/0x300
worker_thread+0x2f7/0x420
? __pfx_worker_thread+0x10/0x10
kthread+0x107/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3d/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_sync
This fixes the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54
CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
q kasan_report+0x143/0x180 mm/kasan/report.c:601
set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353
hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:328
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd10 kernel/workqueue.c:3389
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Allocated by task 5247:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
kasan_kmalloc include/linux/kasan.h:211 [inline]
__kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4193
kmalloc_noprof include/linux/slab.h:681 [inline]
kzalloc_noprof include/linux/slab.h:807 [inline]
mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269
mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296
set_powered+0x3cd/0x5e0 net/bluetooth/mgmt.c:1394
hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712
hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
sock_write_iter+0x2dd/0x400 net/socket.c:1160
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xa72/0xc90 fs/read_write.c:590
ksys_write+0x1a0/0x2c0 fs/read_write.c:643
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 5246:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
__kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
kasan_slab_free include/linux/kasan.h:184 [inline]
slab_free_hook mm/slub.c:2256 [inline]
slab_free mm/slub.c:4477 [inline]
kfree+0x149/0x360 mm/slub.c:4598
settings_rsp+0x2bc/0x390 net/bluetooth/mgmt.c:1443
mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259
__mgmt_power_off+0x112/0x420 net/bluetooth/mgmt.c:9455
hci_dev_close_sync+0x665/0x11a0 net/bluetooth/hci_sync.c:5191
hci_dev_do_close net/bluetooth/hci_core.c:483 [inline]
hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508
sock_do_ioctl+0x158/0x460 net/socket.c:1222
sock_ioctl+0x629/0x8e0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83gv
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix receive ring space parameters when XDP is active
The MTU setting at the time an XDP multi-buffer is attached
determines whether the aggregation ring will be used and the
rx_skb_func handler. This is done in bnxt_set_rx_skb_mode().
If the MTU is later changed, the aggregation ring setting may need
to be changed and it may become out-of-sync with the settings
initially done in bnxt_set_rx_skb_mode(). This may result in
random memory corruption and crashes as the HW may DMA data larger
than the allocated buffer size, such as:
BUG: kernel NULL pointer dereference, address: 00000000000003c0
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 17 PID: 0 Comm: swapper/17 Kdump: loaded Tainted: G S OE 6.1.0-226bf9805506 #1
Hardware name: Wiwynn Delta Lake PVT BZA.02601.0150/Delta Lake-Class1, BIOS F0E_3A12 08/26/2021
RIP: 0010:bnxt_rx_pkt+0xe97/0x1ae0 [bnxt_en]
Code: 8b 95 70 ff ff ff 4c 8b 9d 48 ff ff ff 66 41 89 87 b4 00 00 00 e9 0b f7 ff ff 0f b7 43 0a 49 8b 95 a8 04 00 00 25 ff 0f 00 00 <0f> b7 14 42 48 c1 e2 06 49 03 95 a0 04 00 00 0f b6 42 33f
RSP: 0018:ffffa19f40cc0d18 EFLAGS: 00010202
RAX: 00000000000001e0 RBX: ffff8e2c805c6100 RCX: 00000000000007ff
RDX: 0000000000000000 RSI: ffff8e2c271ab990 RDI: ffff8e2c84f12380
RBP: ffffa19f40cc0e48 R08: 000000000001000d R09: 974ea2fcddfa4cbf
R10: 0000000000000000 R11: ffffa19f40cc0ff8 R12: ffff8e2c94b58980
R13: ffff8e2c952d6600 R14: 0000000000000016 R15: ffff8e2c271ab990
FS: 0000000000000000(0000) GS:ffff8e3b3f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000003c0 CR3: 0000000e8580a004 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
__bnxt_poll_work+0x1c2/0x3e0 [bnxt_en]
To address the issue, we now call bnxt_set_rx_skb_mode() within
bnxt_change_mtu() to properly set the AGG rings configuration and
update rx_skb_func based on the new MTU value.
Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of
bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on
the current MTU.
In the Linux kernel, the following vulnerability has been resolved:
s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()
Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount
(skb->users) and iucv_sock_recvmsg() does not decrement skb refcount
at exit.
This results in skb memory leak in skb_queue_purge() and WARN_ON in
iucv_sock_destruct() during socket close. To fix this decrease
skb refcount by one if MSG_PEEK is set in order to prevent memory
leak and WARN_ON.
WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv]
CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv]
[<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv]
[<001587c704117a32>] __sk_destruct+0x52/0x550
[<001587c704104a54>] __sock_release+0xa4/0x230
[<001587c704104c0c>] sock_close+0x2c/0x40
[<001587c702c5f5a8>] __fput+0x2e8/0x970
[<001587c7024148c4>] task_work_run+0x1c4/0x2c0
[<001587c7023b0716>] do_exit+0x996/0x1050
[<001587c7023b13aa>] do_group_exit+0x13a/0x360
[<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60
[<001587c7022bccca>] do_syscall+0x27a/0x380
[<001587c7049a6a0c>] __do_syscall+0x9c/0x160
[<001587c7049ce8a8>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv]
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix use-after-free of slot->bus on hot remove
Dennis reports a boot crash on recent Lenovo laptops with a USB4 dock.
Since commit 0fc70886569c ("thunderbolt: Reset USB4 v2 host router") and
commit 59a54c5f3dbd ("thunderbolt: Reset topology created by the boot
firmware"), USB4 v2 and v1 Host Routers are reset on probe of the
thunderbolt driver.
The reset clears the Presence Detect State and Data Link Layer Link Active
bits at the USB4 Host Router's Root Port and thus causes hot removal of the
dock.
The crash occurs when pciehp is unbound from one of the dock's Downstream
Ports: pciehp creates a pci_slot on bind and destroys it on unbind. The
pci_slot contains a pointer to the pci_bus below the Downstream Port, but
a reference on that pci_bus is never acquired. The pci_bus is destroyed
before the pci_slot, so a use-after-free ensues when pci_slot_release()
accesses slot->bus.
In principle this should not happen because pci_stop_bus_device() unbinds
pciehp (and therefore destroys the pci_slot) before the pci_bus is
destroyed by pci_remove_bus_device().
However the stacktrace provided by Dennis shows that pciehp is unbound from
pci_remove_bus_device() instead of pci_stop_bus_device(). To understand
the significance of this, one needs to know that the PCI core uses a two
step process to remove a portion of the hierarchy: It first unbinds all
drivers in the sub-hierarchy in pci_stop_bus_device() and then actually
removes the devices in pci_remove_bus_device(). There is no precaution to
prevent driver binding in-between pci_stop_bus_device() and
pci_remove_bus_device().
In Dennis' case, it seems removal of the hierarchy by pciehp races with
driver binding by pci_bus_add_devices(). pciehp is bound to the
Downstream Port after pci_stop_bus_device() has run, so it is unbound by
pci_remove_bus_device() instead of pci_stop_bus_device(). Because the
pci_bus has already been destroyed at that point, accesses to it result in
a use-after-free.
One might conclude that driver binding needs to be prevented after
pci_stop_bus_device() has run. However it seems risky that pci_slot points
to pci_bus without holding a reference. Solely relying on correct ordering
of driver unbind versus pci_bus destruction is certainly not defensive
programming.
If pci_slot has a need to access data in pci_bus, it ought to acquire a
reference. Amend pci_create_slot() accordingly. Dennis reports that the
crash is not reproducible with this change.
Abridged stacktrace:
pcieport 0000:00:07.0: PME: Signaling with IRQ 156
pcieport 0000:00:07.0: pciehp: Slot #12 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pci_bus 0000:20: dev 00, created physical slot 12
pcieport 0000:00:07.0: pciehp: Slot(12): Card not present
...
pcieport 0000:21:02.0: pciehp: pcie_disable_notification: SLOTCTRL d8 write cmd 0
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
CPU: 13 UID: 0 PID: 134 Comm: irq/156-pciehp Not tainted 6.11.0-devel+ #1
RIP: 0010:dev_driver_string+0x12/0x40
pci_destroy_slot
pciehp_remove
pcie_port_remove_service
device_release_driver_internal
bus_remove_device
device_del
device_unregister
remove_iter
device_for_each_child
pcie_portdrv_remove
pci_device_remove
device_release_driver_internal
bus_remove_device
device_del
pci_remove_bus_device (recursive invocation)
pci_remove_bus_device
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix potential out-of-bound accesses for Extigy and Mbox devices
A bogus device can provide a bNumConfigurations value that exceeds the
initial value used in usb_get_configuration for allocating dev->config.
This can lead to out-of-bounds accesses later, e.g. in
usb_destroy_configuration.