Linux: >> Linux Kernel >> 2.6.35.12 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: fix deadlock and link starvation in outgoing data path
The current implementation queues up new control and user packets as needed
and processes this queue down to the ldisc in the same code path.
That means that the upper and the lower layer are hard coupled in the code.
Due to this deadlocks can happen as seen below while transmitting data,
especially during ldisc congestion. Furthermore, the data channels starve
the control channel on high transmission load on the ldisc.
Introduce an additional control channel data queue to prevent timeouts and
link hangups during ldisc congestion. This is being processed before the
user channel data queue in gsm_data_kick(), i.e. with the highest priority.
Put the queue to ldisc data path into a workqueue and trigger it whenever
new data has been put into the transmission queue. Change
gsm_dlci_data_sweep() accordingly to fill up the transmission queue until
TX_THRESH_HI. This solves the locking issue, keeps latency low and provides
good performance on high data load.
Note that now all packets from a DLCI are removed from the internal queue
if the associated DLCI was closed. This ensures that no data is sent by the
introduced write task to an already closed DLCI.
BUG: spinlock recursion on CPU#0, test_v24_loop/124
lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0
CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
do_raw_spin_lock+0x76/0xa0
_raw_spin_lock_irqsave+0x72/0x80
uart_write_room+0x3b/0xc0
gsm_data_kick+0x14b/0x240 [n_gsm]
gsmld_write_wakeup+0x35/0x70 [n_gsm]
tty_wakeup+0x53/0x60
tty_port_default_wakeup+0x1b/0x30
serial8250_tx_chars+0x12f/0x220
serial8250_handle_irq.part.0+0xfe/0x150
serial8250_default_handle_irq+0x48/0x80
serial8250_interrupt+0x56/0xa0
__handle_irq_event_percpu+0x78/0x1f0
handle_irq_event+0x34/0x70
handle_fasteoi_irq+0x90/0x1e0
__common_interrupt+0x69/0x100
common_interrupt+0x48/0xc0
asm_common_interrupt+0x1e/0x40
RIP: 0010:__do_softirq+0x83/0x34e
Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d
e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61
80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00
RSP: 0018:ffffc90000003f98 EFLAGS: 00000286
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7
RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000
? __do_softirq+0x73/0x34e
irq_exit_rcu+0xb5/0x100
common_interrupt+0xa4/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x1e/0x40
RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50
Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff
48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff
65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44
RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001
RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8
? _raw_spin_unlock_irqrestore+0x23/0x50
gsmtty_write+0x65/0x80 [n_gsm]
n_tty_write+0x33f/0x530
? swake_up_all+0xe0/0xe0
file_tty_write.constprop.0+0x1b1/0x320
? n_tty_flush_buffer+0xb0/0xb0
new_sync_write+0x10c/0x190
vfs_write+0x282/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3e5e35c15c
Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
of_get_next_parent() returns a node pointer with refcount incremented,
we should use of_node_put() on it when not need anymore.
Add missing of_node_put() in the error path to avoid refcount leak.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: arkfb: Check the size of screen before memset_io()
In the function arkfb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 659.399066] BUG: unable to handle page fault for address: ffffc90003000000
[ 659.399077] #PF: supervisor write access in kernel mode
[ 659.399079] #PF: error_code(0x0002) - not-present page
[ 659.399094] RIP: 0010:memset_orig+0x33/0xb0
[ 659.399116] Call Trace:
[ 659.399122] arkfb_set_par+0x143f/0x24c0
[ 659.399130] fb_set_var+0x604/0xeb0
[ 659.399161] do_fb_ioctl+0x234/0x670
[ 659.399189] fb_ioctl+0xdd/0x130
Fix the this by checking the value of 'screen_size' before memset_io().
CVSS Score
7.8
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: vt8623fb: Check the size of screen before memset_io()
In the function vt8623fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 583.339036] BUG: unable to handle page fault for address: ffffc90005000000
[ 583.339049] #PF: supervisor write access in kernel mode
[ 583.339052] #PF: error_code(0x0002) - not-present page
[ 583.339074] RIP: 0010:memset_orig+0x33/0xb0
[ 583.339110] Call Trace:
[ 583.339118] vt8623fb_set_par+0x11cd/0x21e0
[ 583.339146] fb_set_var+0x604/0xeb0
[ 583.339181] do_fb_ioctl+0x234/0x670
[ 583.339209] fb_ioctl+0xdd/0x130
Fix the this by checking the value of 'screen_size' before memset_io().
CVSS Score
7.8
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug
in:
drivers/video/fbdev/arkfb.c:784: ark_set_pixclock(info, (hdiv * info->var.pixclock) / hmul);
with hdiv=1, pixclock=1 and hmul=2 you end up with (1*1)/2 = (int) 0.
and then in:
drivers/video/fbdev/arkfb.c:504: rv = dac_set_freq(par->dac, 0, 1000000000 / pixclock);
we'll get a division-by-zero.
The following log can reveal it:
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:ark_set_pixclock drivers/video/fbdev/arkfb.c:504 [inline]
RIP: 0010:arkfb_set_par+0x10fc/0x24c0 drivers/video/fbdev/arkfb.c:784
Call Trace:
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Fix this by checking the argument of ark_set_pixclock() first.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
KASAN reports:
[ 4.668325][ T0] BUG: KASAN: wild-memory-access in dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
[ 4.676149][ T0] Read of size 8 at addr 1fffffff85115558 by task swapper/0/0
[ 4.683454][ T0]
[ 4.685638][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc3-00004-g0e862838f290 #1
[ 4.694331][ T0] Hardware name: Supermicro SYS-5018D-FN4T/X10SDV-8C-TLN4F, BIOS 1.1 03/02/2016
[ 4.703196][ T0] Call Trace:
[ 4.706334][ T0] <TASK>
[ 4.709133][ T0] ? dmar_parse_one_rhsa (arch/x86/include/asm/bitops.h:214 arch/x86/include/asm/bitops.h:226 include/asm-generic/bitops/instrumented-non-atomic.h:142 include/linux/nodemask.h:415 drivers/iommu/intel/dmar.c:497)
after converting the type of the first argument (@nr, bit number)
of arch_test_bit() from `long` to `unsigned long`[0].
Under certain conditions (for example, when ACPI NUMA is disabled
via command line), pxm_to_node() can return %NUMA_NO_NODE (-1).
It is valid 'magic' number of NUMA node, but not valid bit number
to use in bitops.
node_online() eventually descends to test_bit() without checking
for the input, assuming it's on caller side (which might be good
for perf-critical tasks). There, -1 becomes %ULONG_MAX which leads
to an insane array index when calculating bit position in memory.
For now, add an explicit check for @node being not %NUMA_NO_NODE
before calling test_bit(). The actual logics didn't change here
at all.
[0] https://github.com/norov/linux/commit/0e862838f290147ea9c16db852d8d494b552d38d
CVSS Score
7.1
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
video: fbdev: s3fb: Check the size of screen before memset_io()
In the function s3fb_set_par(), the value of 'screen_size' is
calculated by the user input. If the user provides the improper value,
the value of 'screen_size' may larger than 'info->screen_size', which
may cause the following bug:
[ 54.083733] BUG: unable to handle page fault for address: ffffc90003000000
[ 54.083742] #PF: supervisor write access in kernel mode
[ 54.083744] #PF: error_code(0x0002) - not-present page
[ 54.083760] RIP: 0010:memset_orig+0x33/0xb0
[ 54.083782] Call Trace:
[ 54.083788] s3fb_set_par+0x1ec6/0x4040
[ 54.083806] fb_set_var+0x604/0xeb0
[ 54.083836] do_fb_ioctl+0x234/0x670
Fix the this by checking the value of 'screen_size' before memset_io().
CVSS Score
7.8
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix warning in ext4_iomap_begin as race between bmap and write
We got issue as follows:
------------[ cut here ]------------
WARNING: CPU: 3 PID: 9310 at fs/ext4/inode.c:3441 ext4_iomap_begin+0x182/0x5d0
RIP: 0010:ext4_iomap_begin+0x182/0x5d0
RSP: 0018:ffff88812460fa08 EFLAGS: 00010293
RAX: ffff88811f168000 RBX: 0000000000000000 RCX: ffffffff97793c12
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff88812c669160 R08: ffff88811f168000 R09: ffffed10258cd20f
R10: ffff88812c669077 R11: ffffed10258cd20e R12: 0000000000000001
R13: 00000000000000a4 R14: 000000000000000c R15: ffff88812c6691ee
FS: 00007fd0d6ff3740(0000) GS:ffff8883af180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd0d6dda290 CR3: 0000000104a62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
iomap_apply+0x119/0x570
iomap_bmap+0x124/0x150
ext4_bmap+0x14f/0x250
bmap+0x55/0x80
do_vfs_ioctl+0x952/0xbd0
__x64_sys_ioctl+0xc6/0x170
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Above issue may happen as follows:
bmap write
bmap
ext4_bmap
iomap_bmap
ext4_iomap_begin
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
ext4_da_write_inline_data_begin
ext4_prepare_inline_data
ext4_create_inline_data
ext4_set_inode_flag(inode,
EXT4_INODE_INLINE_DATA);
if (WARN_ON_ONCE(ext4_has_inline_data(inode))) ->trigger bug_on
To solved above issue hold inode lock in ext4_bamp.
CVSS Score
7.0
EPSS Score
0.0
Published
2025-06-18
In the Linux kernel, the following vulnerability has been resolved:
dm raid: fix address sanitizer warning in raid_status
There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid
==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x9c
print_address_description.constprop.0+0x1f/0x1e0
print_report.cold+0x55/0x244
kasan_report+0xc9/0x100
raid_status+0x1747/0x2820 [dm_raid]
dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
table_load+0x35c/0x630 [dm_mod]
ctl_ioctl+0x411/0x630 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
__x64_sys_ioctl+0x12a/0x1a0
do_syscall_64+0x5b/0x80
The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.
However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.
Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.
CVSS Score
7.1
EPSS Score
0.0
Published
2025-06-18