Linux: >> Linux Kernel >> 5.15.210 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()
rtw8822b_set_antenna() can be called from userspace when the chip is
powered off. In that case a WARNING is triggered in
rtw8822b_config_trx_mode() because trying to read the RF registers
when the chip is powered off returns an unexpected value.
Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when
the chip is powered on.
------------[ cut here ]------------
write RF mode table fail
WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021
RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b]
Call Trace:
<TASK>
rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b]
rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb]
ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3]
nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? netdev_run_todo+0x63/0x550
genl_family_rcv_msg_doit+0xfc/0x160
genl_rcv_msg+0x1aa/0x2b0
? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda]
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x59/0x110
genl_rcv+0x28/0x40
netlink_unicast+0x285/0x3c0
? __alloc_skb+0xdb/0x1a0
netlink_sendmsg+0x20d/0x430
____sys_sendmsg+0x39f/0x3d0
? import_iovec+0x2f/0x40
___sys_sendmsg+0x99/0xe0
? refill_obj_stock+0x12e/0x240
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x81/0x970
? do_syscall_64+0x81/0x970
? ksys_read+0x73/0xf0
? do_syscall_64+0x81/0x970
? count_memcg_events+0xc2/0x190
? handle_mm_fault+0x1d7/0x2d0
? do_user_addr_fault+0x21a/0x690
? exc_page_fault+0x7e/0x1a0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
---[ end trace 0000000000000000 ]---
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-08
In the Linux kernel, the following vulnerability has been resolved:
mailbox: Prevent out-of-bounds access in fw_mbox_index_xlate()
Although it is guided that `#mbox-cells` must be at least 1, there are
many instances of `#mbox-cells = <0>;` in the device tree. If that is
the case and the corresponding mailbox controller does not provide
`fw_xlate` and of_xlate` function pointers, `fw_mbox_index_xlate()` will
be used by default and out-of-bounds accesses could occur due to lack of
bounds check in that function.
CVSS Score
7.1
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
md-cluster: fix NULL pointer dereference in process_metadata_update
The function process_metadata_update() blindly dereferences the 'thread'
pointer (acquired via rcu_dereference_protected) within the wait_event()
macro.
While the code comment states "daemon thread must exist", there is a valid
race condition window during the MD array startup sequence (md_run):
1. bitmap_load() is called, which invokes md_cluster_ops->join().
2. join() starts the "cluster_recv" thread (recv_daemon).
3. At this point, recv_daemon is active and processing messages.
4. However, mddev->thread (the main MD thread) is not initialized until
later in md_run().
If a METADATA_UPDATED message is received from a remote node during this
specific window, process_metadata_update() will be called while
mddev->thread is still NULL, leading to a kernel panic.
To fix this, we must validate the 'thread' pointer. If it is NULL, we
release the held lock (no_new_dev_lockres) and return early, safely
ignoring the update request as the array is not yet fully ready to
process it.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
CVSS Score
7.5
EPSS Score
0.003
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap
corruption when memory compaction is enabled.
Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned
tcache chunk"), and compiler internal errors. The failures disappear
when compaction is disabled or when using global TLB invalidation.
The root cause is insufficient TLB shootdown during page migration.
Alpha relies on ASN-based MM context rollover for instruction cache
coherency, but this alone is not sufficient to prevent stale data or
instruction translations from surviving migration.
Fix this by introducing a migration-specific helper that combines:
- MM context invalidation (ASN rollover),
- immediate per-CPU TLB invalidation (TBI),
- synchronous cross-CPU shootdown when required.
The helper is used only by migration/compaction paths to avoid changing
global TLB semantics.
Additionally, update flush_tlb_other(), pte_clear(), to use
READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering.
This fixes observed crashes on both UP and SMP Alpha systems.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
9p/xen: protect xen_9pfs_front_free against concurrent calls
The xenwatch thread can race with other back-end change notifications
and call xen_9pfs_front_free() twice, hitting the observed general
protection fault due to a double-free. Guard the teardown path so only
one caller can release the front-end state at a time, preventing the
crash.
This is a fix for the following double-free:
[ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatch Not tainted 6.18.0-02087-g51ab33fc0a8b-dirty #60 PREEMPT(none)
[ 27.052363] RIP: e030:xen_9pfs_front_free+0x1d/0x150
[ 27.052368] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 41 55 41 54 55 48 89 fd 48 c7 c7 48 d0 92 85 53 e8 cb cb 05 00 48 8b 45 08 48 8b 55 00 <48> 3b 28 0f 85 f9 28 35 fe 48 3b 6a 08 0f 85 ef 28 35 fe 48 89 42
[ 27.052377] RSP: e02b:ffffc9004016fdd0 EFLAGS: 00010246
[ 27.052381] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88800d66e400 RCX: 0000000000000000
[ 27.052385] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: 0000000000000000
[ 27.052389] RBP: ffff88800a887040 R08: 0000000000000000 R09: 0000000000000000
[ 27.052393] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888009e46b68
[ 27.052397] R13: 0000000000000200 R14: 0000000000000000 R15: ffff88800a887040
[ 27.052404] FS: 0000000000000000(0000) GS:ffff88808ca57000(0000) knlGS:0000000000000000
[ 27.052408] CS: e030 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 27.052412] CR2: 00007f9714004360 CR3: 0000000004834000 CR4: 0000000000050660
[ 27.052418] Call Trace:
[ 27.052420] <TASK>
[ 27.052422] xen_9pfs_front_changed+0x5d5/0x720
[ 27.052426] ? xenbus_otherend_changed+0x72/0x140
[ 27.052430] ? __pfx_xenwatch_thread+0x10/0x10
[ 27.052434] xenwatch_thread+0x94/0x1c0
[ 27.052438] ? __pfx_autoremove_wake_function+0x10/0x10
[ 27.052442] kthread+0xf8/0x240
[ 27.052445] ? __pfx_kthread+0x10/0x10
[ 27.052449] ? __pfx_kthread+0x10/0x10
[ 27.052452] ret_from_fork+0x16b/0x1a0
[ 27.052456] ? __pfx_kthread+0x10/0x10
[ 27.052459] ret_from_fork_asm+0x1a/0x30
[ 27.052463] </TASK>
[ 27.052465] Modules linked in:
[ 27.052471] ---[ end trace 0000000000000000 ]---
CVSS Score
8.8
EPSS Score
0.002
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted).
CVSS Score
7.8
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
| frag_list-+--> tskb
+-----------+ +----------+
| frags[0] | (empty! copy failed before filling)
+----------+
For SOCK_SEQPACKET with partial data already copied, the error path
saves this message via partial_message for later completion. For
SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a
subsequent zero-length write(fd, NULL, 0) completes the message and
queues it to sk_write_queue. kcm_write_msgs() then walks the
frag_list and hits:
WARN_ON(!skb_shinfo(skb)->nr_frags)
TCP has a similar pattern where skbs are enqueued before data copy
and cleaned up on failure via tcp_remove_empty_skb(). KCM was
missing the equivalent cleanup.
Fix this by tracking the predecessor skb (frag_prev) when allocating
a new frag_list entry. On error, if the tail skb has zero frags,
use frag_prev to unlink and free it in O(1) without walking the
singly-linked frag_list. frag_prev is safe to dereference because
the entire message chain is only held locally (or in kcm->seq_skb)
and is not added to sk_write_queue until MSG_EOR, so the send path
cannot free it underneath us.
Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log
if the condition is somehow hit repeatedly.
There are currently no KCM selftests in the kernel tree; a simple
reproducer is available at [1].
[1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06
In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
CVSS Score
5.5
EPSS Score
0.001
Published
2026-05-06