Debian: Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix data corruption in dsync block recovery for small block sizes
The helper function nilfs_recovery_copy_block() of
nilfs_recovery_dsync_blocks(), which recovers data from logs created by
data sync writes during a mount after an unclean shutdown, incorrectly
calculates the on-page offset when copying repair data to the file's page
cache. In environments where the block size is smaller than the page
size, this flaw can cause data corruption and leak uninitialized memory
bytes during the recovery process.
Fix these issues by correcting this byte offset calculation on the page.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-04-03
In the Linux kernel, the following vulnerability has been resolved:
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the
VMBus channel"), napi_disable was getting called for all channels,
including all subchannels without confirming if they are enabled or not.
This caused hv_netvsc getting hung at napi_disable, when netvsc_probe()
has finished running but nvdev->subchan_work has not started yet.
netvsc_subchan_work() -> rndis_set_subchannel() has not created the
sub-channels and because of that netvsc_sc_open() is not running.
netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which
netvsc_subchan_work did not run.
netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI
cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the
NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the
opposite.
Now during netvsc_device_remove(), when napi_disable is called for those
subchannels, napi_disable gets stuck on infinite msleep.
This fix addresses this problem by ensuring that napi_disable() is not
getting called for non-enabled NAPI struct.
But netif_napi_del() is still necessary for these non-enabled NAPI struct
for cleanup purpose.
Call trace:
[ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002
[ 654.568030] Call Trace:
[ 654.571221] <TASK>
[ 654.573790] __schedule+0x2d6/0x960
[ 654.577733] schedule+0x69/0xf0
[ 654.581214] schedule_timeout+0x87/0x140
[ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20
[ 654.590291] msleep+0x2d/0x40
[ 654.593625] napi_disable+0x2b/0x80
[ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc]
[ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc]
[ 654.611101] ? do_wait_intr+0xb0/0xb0
[ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc]
[ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus]
CVSS Score
4.7
EPSS Score
0.0
Published
2024-04-03
In the Linux kernel, the following vulnerability has been resolved:
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...)
modifies jsk->filters while receiving packets.
Following trace was seen on affected system:
==================================================================
BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
Read of size 4 at addr ffff888012144014 by task j1939/350
CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
print_report+0xd3/0x620
? kasan_complete_mode_report_info+0x7d/0x200
? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
kasan_report+0xc2/0x100
? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
__asan_load4+0x84/0xb0
j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939]
j1939_sk_recv+0x20b/0x320 [can_j1939]
? __kasan_check_write+0x18/0x20
? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939]
? j1939_simple_recv+0x69/0x280 [can_j1939]
? j1939_ac_recv+0x5e/0x310 [can_j1939]
j1939_can_recv+0x43f/0x580 [can_j1939]
? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
? raw_rcv+0x42/0x3c0 [can_raw]
? __pfx_j1939_can_recv+0x10/0x10 [can_j1939]
can_rcv_filter+0x11f/0x350 [can]
can_receive+0x12f/0x190 [can]
? __pfx_can_rcv+0x10/0x10 [can]
can_rcv+0xdd/0x130 [can]
? __pfx_can_rcv+0x10/0x10 [can]
__netif_receive_skb_one_core+0x13d/0x150
? __pfx___netif_receive_skb_one_core+0x10/0x10
? __kasan_check_write+0x18/0x20
? _raw_spin_lock_irq+0x8c/0xe0
__netif_receive_skb+0x23/0xb0
process_backlog+0x107/0x260
__napi_poll+0x69/0x310
net_rx_action+0x2a1/0x580
? __pfx_net_rx_action+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? handle_irq_event+0x7d/0xa0
__do_softirq+0xf3/0x3f8
do_softirq+0x53/0x80
</IRQ>
<TASK>
__local_bh_enable_ip+0x6e/0x70
netif_rx+0x16b/0x180
can_send+0x32b/0x520 [can]
? __pfx_can_send+0x10/0x10 [can]
? __check_object_size+0x299/0x410
raw_sendmsg+0x572/0x6d0 [can_raw]
? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
? apparmor_socket_sendmsg+0x2f/0x40
? __pfx_raw_sendmsg+0x10/0x10 [can_raw]
sock_sendmsg+0xef/0x100
sock_write_iter+0x162/0x220
? __pfx_sock_write_iter+0x10/0x10
? __rtnl_unlock+0x47/0x80
? security_file_permission+0x54/0x320
vfs_write+0x6ba/0x750
? __pfx_vfs_write+0x10/0x10
? __fget_light+0x1ca/0x1f0
? __rcu_read_unlock+0x5b/0x280
ksys_write+0x143/0x170
? __pfx_ksys_write+0x10/0x10
? __kasan_check_read+0x15/0x20
? fpregs_assert_state_consistent+0x62/0x70
__x64_sys_write+0x47/0x60
do_syscall_64+0x60/0x90
? do_syscall_64+0x6d/0x90
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x79/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Allocated by task 348:
kasan_save_stack+0x2a/0x50
kasan_set_track+0x29/0x40
kasan_save_alloc_info+0x1f/0x30
__kasan_kmalloc+0xb5/0xc0
__kmalloc_node_track_caller+0x67/0x160
j1939_sk_setsockopt+0x284/0x450 [can_j1939]
__sys_setsockopt+0x15c/0x2f0
__x64_sys_setsockopt+0x6b/0x80
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 349:
kasan_save_stack+0x2a/0x50
kasan_set_track+0x29/0x40
kasan_save_free_info+0x2f/0x50
__kasan_slab_free+0x12e/0x1c0
__kmem_cache_free+0x1b9/0x380
kfree+0x7a/0x120
j1939_sk_setsockopt+0x3b2/0x450 [can_j1939]
__sys_setsockopt+0x15c/0x2f0
__x64_sys_setsockopt+0x6b/0x80
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
CVSS Score
7.8
EPSS Score
0.0
Published
2024-04-03
In the Linux kernel, the following vulnerability has been resolved:
ppp_async: limit MRU to 64K
syzbot triggered a warning [1] in __alloc_pages():
WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)
Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K")
Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU)
[1]:
WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Workqueue: events_unbound flush_to_ldisc
pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543
lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537
sp : ffff800093967580
x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000
x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0
x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8
x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120
x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005
x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000
x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001
x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0
Call trace:
__alloc_pages+0x308/0x698 mm/page_alloc.c:4543
__alloc_pages_node include/linux/gfp.h:238 [inline]
alloc_pages_node include/linux/gfp.h:261 [inline]
__kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926
__do_kmalloc_node mm/slub.c:3969 [inline]
__kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001
kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590
__alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651
__netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715
netdev_alloc_skb include/linux/skbuff.h:3235 [inline]
dev_alloc_skb include/linux/skbuff.h:3248 [inline]
ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline]
ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341
tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390
tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37
receive_buf drivers/tty/tty_buffer.c:444 [inline]
flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494
process_one_work+0x694/0x1204 kernel/workqueue.c:2633
process_scheduled_works kernel/workqueue.c:2706 [inline]
worker_thread+0x938/0xef4 kernel/workqueue.c:2787
kthread+0x288/0x310 kernel/kthread.c:388
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
CVSS Score
5.5
EPSS Score
0.0
Published
2024-04-02
In the Linux kernel, the following vulnerability has been resolved:
inet: read sk->sk_family once in inet_recv_error()
inet_recv_error() is called without holding the socket lock.
IPv6 socket could mutate to IPv4 with IPV6_ADDRFORM
socket option and trigger a KCSAN warning.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-04-02
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: xgmac: fix handling of DPP safety error for DMA channels
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in
XGMAC core") checks and reports safety errors, but leaves the
Data Path Parity Errors for each channel in DMA unhandled at all, lead to
a storm of interrupt.
Fix it by checking and clearing the DMA_DPP_Interrupt_Status register.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-04-02
In the Linux kernel, the following vulnerability has been resolved:
tipc: Check the bearer type before calling tipc_udp_nl_bearer_add()
syzbot reported the following general protection fault [1]:
general protection fault, probably for non-canonical address 0xdffffc0000000010: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000080-0x0000000000000087]
...
RIP: 0010:tipc_udp_is_known_peer+0x9c/0x250 net/tipc/udp_media.c:291
...
Call Trace:
<TASK>
tipc_udp_nl_bearer_add+0x212/0x2f0 net/tipc/udp_media.c:646
tipc_nl_bearer_add+0x21e/0x360 net/tipc/bearer.c:1089
genl_family_rcv_msg_doit+0x1fc/0x2e0 net/netlink/genetlink.c:972
genl_family_rcv_msg net/netlink/genetlink.c:1052 [inline]
genl_rcv_msg+0x561/0x800 net/netlink/genetlink.c:1067
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2544
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
netlink_unicast+0x53b/0x810 net/netlink/af_netlink.c:1367
netlink_sendmsg+0x8b7/0xd70 net/netlink/af_netlink.c:1909
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The cause of this issue is that when tipc_nl_bearer_add() is called with
the TIPC_NLA_BEARER_UDP_OPTS attribute, tipc_udp_nl_bearer_add() is called
even if the bearer is not UDP.
tipc_udp_is_known_peer() called by tipc_udp_nl_bearer_add() assumes that
the media_ptr field of the tipc_bearer has an udp_bearer type object, so
the function goes crazy for non-UDP bearers.
This patch fixes the issue by checking the bearer type before calling
tipc_udp_nl_bearer_add() in tipc_nl_bearer_add().
CVSS Score
5.5
EPSS Score
0.0
Published
2024-04-02
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix out-of-bounds memory access
Fix a bug that pdata->cpu_map[] is set before out-of-bounds check.
The problem might be triggered on systems with more than 128 cores per
package.
CVSS Score
7.1
EPSS Score
0.0
Published
2024-04-02
In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix out of bounds access when building IPv6 PMTU error
If the ICMPv6 error is built from a non-linear skb we get the following
splat,
BUG: KASAN: slab-out-of-bounds in do_csum+0x220/0x240
Read of size 4 at addr ffff88811d402c80 by task netperf/820
CPU: 0 PID: 820 Comm: netperf Not tainted 6.8.0-rc1+ #543
...
kasan_report+0xd8/0x110
do_csum+0x220/0x240
csum_partial+0xc/0x20
skb_tunnel_check_pmtu+0xeb9/0x3280
vxlan_xmit_one+0x14c2/0x4080
vxlan_xmit+0xf61/0x5c00
dev_hard_start_xmit+0xfb/0x510
__dev_queue_xmit+0x7cd/0x32a0
br_dev_queue_push_xmit+0x39d/0x6a0
Use skb_checksum instead of csum_partial who cannot deal with non-linear
SKBs.
CVSS Score
7.1
EPSS Score
0.0
Published
2024-04-02
In the Linux kernel, the following vulnerability has been resolved:
blk-mq: fix IO hang from sbitmap wakeup race
In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.
Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.
This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.
modprobe -r scsi_debug
modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4
dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \
--runtime=100 --numjobs=40 --time_based --name=test \
--ioengine=libaio
Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which
is just fine in case of running out of tag.
CVSS Score
4.7
EPSS Score
0.0
Published
2024-04-02