Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix integer overflow in UNMAP bounds check
sbc_execute_unmap() checks LBA + range does not exceed the device capacity,
but does not guard against LBA + range wrapping around on 64-bit overflow.
Add an overflow check matching the pattern already used for WRITE_SAME in
the same file.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
[ij: add include]
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: terminate the cached volume label after UTF-8 conversion
ntfs_fill_super() loads the on-disk volume label with utf16s_to_utf8s()
and stores the result in sbi->volume.label. The converted label is later
exposed through ntfs3_label_show() using %s, but utf16s_to_utf8s() only
returns the number of bytes written and does not add a trailing NUL.
If the converted label fills the entire fixed buffer,
ntfs3_label_show() can read past the end of sbi->volume.label while
looking for a terminator.
Terminate the cached label explicitly after a successful conversion and
clamp the exact-full case to the last byte of the buffer.
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free if write is called after disconnect
If a user writes to the chardev after disconnect has been called, the
kernel panics with the following trace (with
CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
BUG: kernel NULL pointer dereference, address: 0000000000000218
...
Call Trace:
<TASK>
gb_operation_create_common+0x61/0x180
gb_operation_create_flags+0x28/0xa0
gb_operation_sync_timeout+0x6f/0x100
raw_write+0x7b/0xc7 [gb_raw]
vfs_write+0xcf/0x420
? task_mm_cid_work+0x136/0x220
ksys_write+0x63/0xe0
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Disconnect calls gb_connection_destroy, which ends up freeing the
connection object. When gb_operation_sync is called in the write file
operations, its gets a freed connection as parameter and the kernel
panics.
The gb_connection_destroy cannot be moved out of the disconnect
function, as the Greybus subsystem expect all connections belonging to a
bundle to be destroyed when disconnect returns.
To prevent this bug, use a rw lock to synchronize access between write
and disconnect. This guarantees that the write function doesn't try
to use a disconnected connection.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cdev is contained in the "gb_raw" structure, which is freed in the
disconnect operation. When the cdev is released at a later time,
cdev_put gets an address that points to freed memory.
To fix this use-after-free, convert the struct device from a pointer to
being embedded, that makes the lifetime of the cdev and of this device
the same. Then, use cdev_device_add, which guarantees that the device
won't be released until all references to the cdev have been released.
Finally, delegate the freeing of the structure to the device release
function, instead of freeing immediately in the disconnect callback.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
NFSD: fix nfs4_file access extra count in nfsd4_add_rdaccess_to_wrdeleg
In nfsd4_add_rdaccess_to_wrdeleg, if fp->fi_fds[O_RDONLY] is already
set by another thread, __nfs4_file_get_access should not be called
to increment the nfs4_file access count since that was already done
by the thread that added READ access to the file. The extra fi_access
count in nfs4_file can prevent the corresponding nfsd_file from being
freed.
When stopping nfs-server service, these extra access counts trigger a
BUG in kmem_cache_destroy() that shows nfsd_file object remaining on
__kmem_cache_shutdown.
This problem can be reproduced by running the Git project's test
suite over NFS.
CVSS Score
7.5
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ice: fix race condition in TX timestamp ring cleanup
Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map()
that can cause a NULL pointer dereference.
ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag
after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map
call on another CPU to dereference the tstamp_ring, which could lead to
a NULL pointer dereference.
CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map()
--------------------------------|---------------------------------
tx_ring->tstamp_ring = NULL |
| ice_is_txtime_cfg() -> true
| tstamp_ring = tx_ring->tstamp_ring
| tstamp_ring->count // NULL deref!
flags &= ~ICE_TX_FLAGS_TXTIME |
Fix by:
1. Reordering ice_free_tx_tstamp_ring() to clear the flag before
NULLing the pointer, with smp_wmb() to ensure proper ordering.
2. Adding smp_rmb() in ice_tx_map() after the flag check to order the
flag read before the pointer read, using READ_ONCE() for the
pointer, and adding a NULL check as a safety net.
3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using
atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag
operations throughout the driver:
- ICE_TX_RING_FLAGS_XDP
- ICE_TX_RING_FLAGS_VLAN_L2TAG1
- ICE_TX_RING_FLAGS_VLAN_L2TAG2
- ICE_TX_RING_FLAGS_TXTIME
CVSS Score
4.7
EPSS Score
0.002
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb2_open during durable reconnect
In smb2_open, the call to ksmbd_put_durable_fd(fp) drops the reference
to the durable file descriptor early during the durable reconnect
process. If an error occurs subsequently (eg, ksmbd_iov_pin_rsp fails)
or a scavenger accesses the file, it leads to a use-after-free when
accessing fp properties (eg fp->create_time).
Move the single put to the end of the function below err_out2 so fp
stays valid until smb2_open returns.
CVSS Score
9.8
EPSS Score
0.004
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
net/sched: taprio: fix use-after-free in advance_sched() on schedule switch
In advance_sched(), when should_change_schedules() returns true,
switch_schedules() is called to promote the admin schedule to oper.
switch_schedules() queues the old oper schedule for RCU freeing via
call_rcu(), but 'next' still points into an entry of the old oper
schedule. The subsequent 'next->end_time = end_time' and
rcu_assign_pointer(q->current_entry, next) are use-after-free.
Fix this by selecting 'next' from the new oper schedule immediately
after switch_schedules(), and using its pre-calculated end_time.
setup_first_end_time() sets the first entry's end_time to
base_time + interval when the schedule is installed, so the value
is already correct.
The deleted 'end_time = sched_base_time(admin)' assignment was also
harmful independently: it would overwrite the new first entry's
pre-calculated end_time with just base_time.
CVSS Score
7.8
EPSS Score
0.001
Published
2026-06-24
In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3
CVSS Score
5.5
EPSS Score
0.002
Published
2026-06-24