Linux: >> Linux Kernel >> 6.1.49 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
jbd2: stop waiting for space when jbd2_cleanup_journal_tail() returns error
In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail()
to recover some journal space. But if an error occurs while executing
jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free
space right away, we try other branches, and if j_committing_transaction
is NULL (i.e., the tid is 0), we will get the following complain:
============================================
JBD2: I/O error when updating journal superblock for sdd-8.
__jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available
__jbd2_log_wait_for_space: no way to get more journal space in sdd-8
------------[ cut here ]------------
WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0
Modules linked in:
CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1
RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0
Call Trace:
<TASK>
add_transaction_credits+0x5d1/0x5e0
start_this_handle+0x1ef/0x6a0
jbd2__journal_start+0x18b/0x340
ext4_dirty_inode+0x5d/0xb0
__mark_inode_dirty+0xe4/0x5d0
generic_update_time+0x60/0x70
[...]
============================================
So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to
clean up at the moment, continue to try to reclaim free space in other ways.
Note that this fix relies on commit 6f6a6fda2945 ("jbd2: fix ocfs2 corrupt
when updating journal superblock fails") to make jbd2_cleanup_journal_tail
return the correct error code.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix timer use-after-free on failed mount
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ar0521: Use cansleep version of gpiod_set_value()
If we use GPIO reset from I2C port expander, we must use *_cansleep()
variant of GPIO functions.
This was not done in ar0521_power_on()/ar0521_power_off() functions.
Let's fix that.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c
Modules linked in:
CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53
Hardware name: Diasom DS-RK3568-SOM-EVB (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : gpiod_set_value+0x74/0x7c
lr : ar0521_power_on+0xcc/0x290
sp : ffffff8001d7ab70
x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000
x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088
x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088
x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80
x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000
x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930
x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0
x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780
x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001
Call trace:
gpiod_set_value+0x74/0x7c
ar0521_power_on+0xcc/0x290
...
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package()
ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0
ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause
NULL pointer dereference later.
[ rjw: Subject and changelog edits ]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
mailbox: bcm2835: Fix timeout during suspend mode
During noirq suspend phase the Raspberry Pi power driver suffer of
firmware property timeouts. The reason is that the IRQ of the underlying
BCM2835 mailbox is disabled and rpi_firmware_property_list() will always
run into a timeout [1].
Since the VideoCore side isn't consider as a wakeup source, set the
IRQF_NO_SUSPEND flag for the mailbox IRQ in order to keep it enabled
during suspend-resume cycle.
[1]
PM: late suspend of devices complete after 1.754 msecs
WARNING: CPU: 0 PID: 438 at drivers/firmware/raspberrypi.c:128
rpi_firmware_property_list+0x204/0x22c
Firmware transaction 0x00028001 timeout
Modules linked in:
CPU: 0 PID: 438 Comm: bash Tainted: G C 6.9.3-dirty #17
Hardware name: BCM2835
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x44
dump_stack_lvl from __warn+0x88/0xec
__warn from warn_slowpath_fmt+0x7c/0xb0
warn_slowpath_fmt from rpi_firmware_property_list+0x204/0x22c
rpi_firmware_property_list from rpi_firmware_property+0x68/0x8c
rpi_firmware_property from rpi_firmware_set_power+0x54/0xc0
rpi_firmware_set_power from _genpd_power_off+0xe4/0x148
_genpd_power_off from genpd_sync_power_off+0x7c/0x11c
genpd_sync_power_off from genpd_finish_suspend+0xcc/0xe0
genpd_finish_suspend from dpm_run_callback+0x78/0xd0
dpm_run_callback from device_suspend_noirq+0xc0/0x238
device_suspend_noirq from dpm_suspend_noirq+0xb0/0x168
dpm_suspend_noirq from suspend_devices_and_enter+0x1b8/0x5ac
suspend_devices_and_enter from pm_suspend+0x254/0x2e4
pm_suspend from state_store+0xa8/0xd4
state_store from kernfs_fop_write_iter+0x154/0x1a0
kernfs_fop_write_iter from vfs_write+0x12c/0x184
vfs_write from ksys_write+0x78/0xc0
ksys_write from ret_fast_syscall+0x0/0x54
Exception stack(0xcc93dfa8 to 0xcc93dff0)
[...]
PM: noirq suspend of devices complete after 3095.584 msecs
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: remove unreasonable unlock in ocfs2_read_blocks
Patch series "Misc fixes for ocfs2_read_blocks", v5.
This series contains 2 fixes for ocfs2_read_blocks(). The first patch fix
the issue reported by syzbot, which detects bad unlock balance in
ocfs2_read_blocks(). The second patch fixes an issue reported by Heming
Zhao when reviewing above fix.
This patch (of 2):
There was a lock release before exiting, so remove the unreasonable unlock.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cancel dqi_sync_work before freeing oinfo
ocfs2_global_read_info() will initialize and schedule dqi_sync_work at the
end, if error occurs after successfully reading global quota, it will
trigger the following warning with CONFIG_DEBUG_OBJECTS_* enabled:
ODEBUG: free active (active state 0) object: 00000000d8b0ce28 object type: timer_list hint: qsync_work_fn+0x0/0x16c
This reports that there is an active delayed work when freeing oinfo in
error handling, so cancel dqi_sync_work first. BTW, return status instead
of -1 when .read_file_info fails.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
ext4: filesystems without casefold feature cannot be mounted with siphash
When mounting the ext4 filesystem, if the default hash version is set to
DX_HASH_SIPHASH but the casefold feature is not set, exit the mounting.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix index out of bounds in DCN30 color transformation
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_hw_format` function in the DCN30 color
management module. The issue could occur when the index 'i' exceeds the
number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
CVSS Score
7.8
EPSS Score
0.0
Published
2024-10-21
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Implement bounds check for stream encoder creation in DCN401
'stream_enc_regs' array is an array of dcn10_stream_enc_registers
structures. The array is initialized with four elements, corresponding
to the four calls to stream_enc_regs() in the array initializer. This
means that valid indices for this array are 0, 1, 2, and 3.
The error message 'stream_enc_regs' 4 <= 5 below, is indicating that
there is an attempt to access this array with an index of 5, which is
out of bounds. This could lead to undefined behavior
Here, eng_id is used as an index to access the stream_enc_regs array. If
eng_id is 5, this would result in an out-of-bounds access on the
stream_enc_regs array.
Thus fixing Buffer overflow error in dcn401_stream_encoder_create
Found by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn401/dcn401_resource.c:1209 dcn401_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-21