Linux: >> Linux Kernel >> 6.1.159 Security Vulnerabilities
A vulnerability was found in systemd-coredump. This flaw allows an attacker to force a SUID process to crash and replace it with a non-SUID binary to access the original's privileged process coredump, allowing the attacker to read sensitive data, such as /etc/shadow content, loaded by the original process.
A SUID binary or process has a special type of permission, which allows the process to run with the file owner's permissions, regardless of the user executing the binary. This allows the process to access more restricted data than unprivileged users or processes would be able to. An attacker can leverage this flaw by forcing a SUID process to crash and force the Linux kernel to recycle the process PID before systemd-coredump can analyze the /proc/pid/auxv file. If the attacker wins the race condition, they gain access to the original's SUID process coredump file. They can read sensitive content loaded into memory by the original binary, affecting data confidentiality.
CVSS Score
4.7
EPSS Score
0.0
Published
2025-05-30
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
If dma-coherent property isn't set then descriptors are non-cacheable
and the iocc shareability bits should be disabled. Without this UFS can
end up in an incompatible configuration and suffer from random cache
related stability issues.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
block: fix resource leak in blk_register_queue() error path
When registering a queue fails after blk_mq_sysfs_register() is
successful but the function later encounters an error, we need
to clean up the blk_mq_sysfs resources.
Add the missing blk_mq_sysfs_unregister() call in the error path
to properly clean up these resources and prevent a memory leak.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix UAF in __close_file_table_ids
A use-after-free is possible if one thread destroys the file
via __ksmbd_close_fd while another thread holds a reference to
it. The existing checks on fp->refcount are not sufficient to
prevent this.
The fix takes ft->lock around the section which removes the
file from the file table. This prevents two threads acquiring the
same file pointer via __close_file_table_ids, as well as the other
functions which retrieve a file from the IDR and which already use
this same lock.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
smb: client: Avoid race in open_cached_dir with lease breaks
A pre-existing valid cfid returned from find_or_create_cached_dir might
race with a lease break, meaning open_cached_dir doesn't consider it
valid, and thinks it's newly-constructed. This leaks a dentry reference
if the allocation occurs before the queued lease break work runs.
Avoid the race by extending holding the cfid_list_lock across
find_or_create_cached_dir and when the result is checked.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent rename with empty string
Client can send empty newname string to ksmbd server.
It will cause a kernel oops from d_alloc.
This patch return the error when attempting to rename
a file or directory with an empty new name string.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
Previously, commit ed129ec9057f ("KVM: x86: forcibly leave nested mode
on vCPU reset") addressed an issue where a triple fault occurring in
nested mode could lead to use-after-free scenarios. However, the commit
did not handle the analogous situation for System Management Mode (SMM).
This omission results in triggering a WARN when KVM forces a vCPU INIT
after SHUTDOWN interception while the vCPU is in SMM. This situation was
reprodused using Syzkaller by:
1) Creating a KVM VM and vCPU
2) Sending a KVM_SMI ioctl to explicitly enter SMM
3) Executing invalid instructions causing consecutive exceptions and
eventually a triple fault
The issue manifests as follows:
WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112
kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Modules linked in:
CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted
6.1.130-syzkaller-00157-g164fe5dde9b6 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.12.0-1 04/01/2014
RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112
Call Trace:
<TASK>
shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136
svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395
svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457
vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline]
vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062
kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283
kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN()
in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper
emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to
do _something_ sane with the VMCB, since it's technically undefined, and
INIT is the least awful choice given KVM's ABI.
So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of
SMM to avoid any weirdness (and the WARN).
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
[sean: massage changelog, make it clear this isn't architectural behavior]
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_session_rpc_open
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-05-20
In the Linux kernel, the following vulnerability has been resolved:
xsk: Fix race condition in AF_XDP generic RX path
Move rx_lock from xsk_socket to xsk_buff_pool.
Fix synchronization for shared umem mode in
generic RX path where multiple sockets share
single xsk_buff_pool.
RX queue is exclusive to xsk_socket, while FILL
queue can be shared between multiple sockets.
This could result in race condition where two
CPU cores access RX path of two different sockets
sharing the same umem.
Protect both queues by acquiring spinlock in shared
xsk_buff_pool.
Lock contention may be minimized in the future by some
per-thread FQ buffering.
It's safe and necessary to move spin_lock_bh(rx_lock)
after xsk_rcv_check():
* xs->pool and spinlock_init is synchronized by
xsk_bind() -> xsk_is_bound() memory barriers.
* xsk_rcv_check() may return true at the moment
of xsk_release() or xsk_unbind_dev(),
however this will not cause any data races or
race conditions. xsk_unbind_dev() removes xdp
socket from all maps and waits for completion
of all outstanding rx operations. Packets in
RX path will either complete safely or drop.
CVSS Score
4.7
EPSS Score
0.0
Published
2025-05-20