Linux: >> Linux Kernel >> 6.1.49 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
dm vdo: don't refer to dedupe_context after releasing it
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-05
In the Linux kernel, the following vulnerability has been resolved:
thermal: intel: int340x: processor: Fix warning during module unload
The processor_thermal driver uses pcim_device_enable() to enable a PCI
device, which means the device will be automatically disabled on driver
detach. Thus there is no need to call pci_disable_device() again on it.
With recent PCI device resource management improvements, e.g. commit
f748a07a0b64 ("PCI: Remove legacy pcim_release()"), this problem is
exposed and triggers the warining below.
[ 224.010735] proc_thermal_pci 0000:00:04.0: disabling already-disabled device
[ 224.010747] WARNING: CPU: 8 PID: 4442 at drivers/pci/pci.c:2250 pci_disable_device+0xe5/0x100
...
[ 224.010844] Call Trace:
[ 224.010845] <TASK>
[ 224.010847] ? show_regs+0x6d/0x80
[ 224.010851] ? __warn+0x8c/0x140
[ 224.010854] ? pci_disable_device+0xe5/0x100
[ 224.010856] ? report_bug+0x1c9/0x1e0
[ 224.010859] ? handle_bug+0x46/0x80
[ 224.010862] ? exc_invalid_op+0x1d/0x80
[ 224.010863] ? asm_exc_invalid_op+0x1f/0x30
[ 224.010867] ? pci_disable_device+0xe5/0x100
[ 224.010869] ? pci_disable_device+0xe5/0x100
[ 224.010871] ? kfree+0x21a/0x2b0
[ 224.010873] pcim_disable_device+0x20/0x30
[ 224.010875] devm_action_release+0x16/0x20
[ 224.010878] release_nodes+0x47/0xc0
[ 224.010880] devres_release_all+0x9f/0xe0
[ 224.010883] device_unbind_cleanup+0x12/0x80
[ 224.010885] device_release_driver_internal+0x1ca/0x210
[ 224.010887] driver_detach+0x4e/0xa0
[ 224.010889] bus_remove_driver+0x6f/0xf0
[ 224.010890] driver_unregister+0x35/0x60
[ 224.010892] pci_unregister_driver+0x44/0x90
[ 224.010894] proc_thermal_pci_driver_exit+0x14/0x5f0 [processor_thermal_device_pci]
...
[ 224.010921] ---[ end trace 0000000000000000 ]---
Remove the excess pci_disable_device() calls.
[ rjw: Subject and changelog edits ]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-05
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mad: Improve handling of timed out WRs of mad agent
Current timeout handler of mad agent acquires/releases mad_agent_priv
lock for every timed out WRs. This causes heavy locking contention
when higher no. of WRs are to be handled inside timeout handler.
This leads to softlockup with below trace in some use cases where
rdma-cm path is used to establish connection between peer nodes
Trace:
-----
BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767]
CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE
------- --- 5.14.0-427.13.1.el9_4.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019
Workqueue: ib_mad1 timeout_sends [ib_core]
RIP: 0010:__do_softirq+0x78/0x2ac
RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f
RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b
RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000
R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040
FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? __irq_exit_rcu+0xa1/0xc0
? watchdog_timer_fn+0x1b2/0x210
? __pfx_watchdog_timer_fn+0x10/0x10
? __hrtimer_run_queues+0x127/0x2c0
? hrtimer_interrupt+0xfc/0x210
? __sysvec_apic_timer_interrupt+0x5c/0x110
? sysvec_apic_timer_interrupt+0x37/0x90
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? __do_softirq+0x78/0x2ac
? __do_softirq+0x60/0x2ac
__irq_exit_rcu+0xa1/0xc0
sysvec_call_function_single+0x72/0x90
</IRQ>
<TASK>
asm_sysvec_call_function_single+0x16/0x20
RIP: 0010:_raw_spin_unlock_irq+0x14/0x30
RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247
RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800
RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c
RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000
R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538
R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c
cm_process_send_error+0x122/0x1d0 [ib_cm]
timeout_sends+0x1dd/0x270 [ib_core]
process_one_work+0x1e2/0x3b0
? __pfx_worker_thread+0x10/0x10
worker_thread+0x50/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xdd/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x50
</TASK>
Simplified timeout handler by creating local list of timed out WRs
and invoke send handler post creating the list. The new method acquires/
releases lock once to fetch the list and hence helps to reduce locking
contetiong when processing higher no. of WRs
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-05
In the Linux kernel, the following vulnerability has been resolved:
nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-05
In the Linux kernel, the following vulnerability has been resolved:
bpf: support non-r10 register spill/fill to/from stack in precision tracking
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/
CVSS Score
5.5
EPSS Score
0.0
Published
2024-11-05
In the Linux kernel, the following vulnerability has been resolved:
blk-rq-qos: fix crash on rq_qos_wait vs. rq_qos_wake_function race
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
CVSS Score
4.7
EPSS Score
0.0
Published
2024-10-29
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix mptcp DSS corruption due to large pmtu xmit
Syzkaller was able to trigger a DSS corruption:
TCP: request_sock_subflow_v4: Possible SYN flooding on port [::]:20002. Sending cookies.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 5227 at net/mptcp/protocol.c:695 __mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Modules linked in:
CPU: 0 UID: 0 PID: 5227 Comm: syz-executor350 Not tainted 6.11.0-syzkaller-08829-gaf9c191ac2a0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:__mptcp_move_skbs_from_subflow+0x20a9/0x21f0 net/mptcp/protocol.c:695
Code: 0f b6 dc 31 ff 89 de e8 b5 dd ea f5 89 d8 48 81 c4 50 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 98 da ea f5 90 <0f> 0b 90 e9 47 ff ff ff e8 8a da ea f5 90 0f 0b 90 e9 99 e0 ff ff
RSP: 0018:ffffc90000006db8 EFLAGS: 00010246
RAX: ffffffff8ba9df18 RBX: 00000000000055f0 RCX: ffff888030023c00
RDX: 0000000000000100 RSI: 00000000000081e5 RDI: 00000000000055f0
RBP: 1ffff110062bf1ae R08: ffffffff8ba9cf12 R09: 1ffff110062bf1b8
R10: dffffc0000000000 R11: ffffed10062bf1b9 R12: 0000000000000000
R13: dffffc0000000000 R14: 00000000700cec61 R15: 00000000000081e5
FS: 000055556679c380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020287000 CR3: 0000000077892000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
move_skbs_to_msk net/mptcp/protocol.c:811 [inline]
mptcp_data_ready+0x29c/0xa90 net/mptcp/protocol.c:854
subflow_data_ready+0x34a/0x920 net/mptcp/subflow.c:1490
tcp_data_queue+0x20fd/0x76c0 net/ipv4/tcp_input.c:5283
tcp_rcv_established+0xfba/0x2020 net/ipv4/tcp_input.c:6237
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2350
ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5662 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775
process_backlog+0x662/0x15b0 net/core/dev.c:6107
__napi_poll+0xcb/0x490 net/core/dev.c:6771
napi_poll net/core/dev.c:6840 [inline]
net_rx_action+0x89b/0x1240 net/core/dev.c:6962
handle_softirqs+0x2c5/0x980 kernel/softirq.c:554
do_softirq+0x11b/0x1e0 kernel/softirq.c:455
</IRQ>
<TASK>
__local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline]
__dev_queue_xmit+0x1764/0x3e80 net/core/dev.c:4451
dev_queue_xmit include/linux/netdevice.h:3094 [inline]
neigh_hh_output include/net/neighbour.h:526 [inline]
neigh_output include/net/neighbour.h:540 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236
ip_local_out net/ipv4/ip_output.c:130 [inline]
__ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:536
__tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_mtu_probe net/ipv4/tcp_output.c:2547 [inline]
tcp_write_xmit+0x641d/0x6bf0 net/ipv4/tcp_output.c:2752
__tcp_push_pending_frames+0x9b/0x360 net/ipv4/tcp_output.c:3015
tcp_push_pending_frames include/net/tcp.h:2107 [inline]
tcp_data_snd_check net/ipv4/tcp_input.c:5714 [inline]
tcp_rcv_established+0x1026/0x2020 net/ipv4/tcp_input.c:6239
tcp_v4_do_rcv+0x96d/0xc70 net/ipv4/tcp_ipv4.c:1915
sk_backlog_rcv include/net/sock.h:1113 [inline]
__release_sock+0x214/0x350 net/core/sock.c:3072
release_sock+0x61/0x1f0 net/core/sock.c:3626
mptcp_push_
---truncated---
CVSS Score
7.5
EPSS Score
0.001
Published
2024-10-29
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix user-after-free from session log off
There is racy issue between smb2 session log off and smb2 session setup.
It will cause user-after-free from session log off.
This add session_lock when setting SMB2_SESSION_EXPIRED and referece
count to session struct not to free session while it is being used.
CVSS Score
7.0
EPSS Score
0.0
Published
2024-10-29
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: apple: check devm_kasprintf() returned value
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
CVSS Score
5.5
EPSS Score
0.0
Published
2024-10-29
In the Linux kernel, the following vulnerability has been resolved:
tty: n_gsm: Fix use-after-free in gsm_cleanup_mux
BUG: KASAN: slab-use-after-free in gsm_cleanup_mux+0x77b/0x7b0
drivers/tty/n_gsm.c:3160 [n_gsm]
Read of size 8 at addr ffff88815fe99c00 by task poc/3379
CPU: 0 UID: 0 PID: 3379 Comm: poc Not tainted 6.11.0+ #56
Hardware name: VMware, Inc. VMware Virtual Platform/440BX
Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<TASK>
gsm_cleanup_mux+0x77b/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
__pfx_gsm_cleanup_mux+0x10/0x10 drivers/tty/n_gsm.c:3124 [n_gsm]
__pfx_sched_clock_cpu+0x10/0x10 kernel/sched/clock.c:389
update_load_avg+0x1c1/0x27b0 kernel/sched/fair.c:4500
__pfx_min_vruntime_cb_rotate+0x10/0x10 kernel/sched/fair.c:846
__rb_insert_augmented+0x492/0xbf0 lib/rbtree.c:161
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
_raw_spin_lock_irqsave+0x92/0xf0 arch/x86/include/asm/atomic.h:107
__pfx_gsmld_ioctl+0x10/0x10 drivers/tty/n_gsm.c:3822 [n_gsm]
ktime_get+0x5e/0x140 kernel/time/timekeeping.c:195
ldsem_down_read+0x94/0x4e0 arch/x86/include/asm/atomic64_64.h:79
__pfx_ldsem_down_read+0x10/0x10 drivers/tty/tty_ldsem.c:338
__pfx_do_vfs_ioctl+0x10/0x10 fs/ioctl.c:805
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
Allocated by task 65:
gsm_data_alloc.constprop.0+0x27/0x190 drivers/tty/n_gsm.c:926 [n_gsm]
gsm_send+0x2c/0x580 drivers/tty/n_gsm.c:819 [n_gsm]
gsm1_receive+0x547/0xad0 drivers/tty/n_gsm.c:3038 [n_gsm]
gsmld_receive_buf+0x176/0x280 drivers/tty/n_gsm.c:3609 [n_gsm]
tty_ldisc_receive_buf+0x101/0x1e0 drivers/tty/tty_buffer.c:391
tty_port_default_receive_buf+0x61/0xa0 drivers/tty/tty_port.c:39
flush_to_ldisc+0x1b0/0x750 drivers/tty/tty_buffer.c:445
process_scheduled_works+0x2b0/0x10d0 kernel/workqueue.c:3229
worker_thread+0x3dc/0x950 kernel/workqueue.c:3391
kthread+0x2a3/0x370 kernel/kthread.c:389
ret_from_fork+0x2d/0x70 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:257
Freed by task 3367:
kfree+0x126/0x420 mm/slub.c:4580
gsm_cleanup_mux+0x36c/0x7b0 drivers/tty/n_gsm.c:3160 [n_gsm]
gsmld_ioctl+0x395/0x1450 drivers/tty/n_gsm.c:3408 [n_gsm]
tty_ioctl+0x643/0x1100 drivers/tty/tty_io.c:2818
[Analysis]
gsm_msg on the tx_ctrl_list or tx_data_list of gsm_mux
can be freed by multi threads through ioctl,which leads
to the occurrence of uaf. Protect it by gsm tx lock.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-10-29