Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 4.18.17  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: tipc: fix a null-ptr-deref in tipc_topsrv_accept syzbot found a crash in tipc_topsrv_accept: KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Workqueue: tipc_rcv tipc_topsrv_accept RIP: 0010:kernel_accept+0x22d/0x350 net/socket.c:3487 Call Trace: <TASK> tipc_topsrv_accept+0x197/0x280 net/tipc/topsrv.c:460 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 It was caused by srv->listener that might be set to null by tipc_topsrv_stop() in net .exit whereas it's still used in tipc_topsrv_accept() worker. srv->listener is protected by srv->idr_lock in tipc_topsrv_stop(), so add a check for srv->listener under srv->idr_lock in tipc_topsrv_accept() to avoid the null-ptr-deref. To ensure the lsock is not released during the tipc_topsrv_accept(), move sock_release() after tipc_topsrv_work_stop() where it's waiting until the tipc_topsrv_accept worker to be done. Note that sk_callback_lock is used to protect sk->sk_user_data instead of srv->listener, and it should check srv in tipc_topsrv_listener_data_ready() instead. This also ensures that no more tipc_topsrv_accept worker will be started after tipc_conn_close() is called in tipc_topsrv_stop() where it sets sk->sk_user_data to null.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix potential shift-out-of-bounds in brcmf_fw_alloc_request() This patch fixes a shift-out-of-bounds in brcmfmac that occurs in BIT(chiprev) when a 'chiprev' provided by the device is too large. It should also not be equal to or greater than BITS_PER_TYPE(u32) as we do bitwise AND with a u32 variable and BIT(chiprev). The patch adds a check that makes the function return NULL if that is the case. Note that the NULL case is later handled by the bus-specific caller, brcmf_usb_probe_cb() or brcmf_usb_reset_resume(), for example. Found by a modified version of syzkaller. UBSAN: shift-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c shift exponent 151055786 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 1885 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_shift_out_of_bounds.cold+0x53/0xdb ? lock_chain_count+0x20/0x20 brcmf_fw_alloc_request.cold+0x19/0x3ea ? brcmf_fw_get_firmwares+0x250/0x250 ? brcmf_usb_ioctl_resp_wait+0x1a7/0x1f0 brcmf_usb_get_fwname+0x114/0x1a0 ? brcmf_usb_reset_resume+0x120/0x120 ? number+0x6c4/0x9a0 brcmf_c_process_clm_blob+0x168/0x590 ? put_dec+0x90/0x90 ? enable_ptr_key_workfn+0x20/0x20 ? brcmf_common_pd_remove+0x50/0x50 ? rcu_read_lock_sched_held+0xa1/0xd0 brcmf_c_preinit_dcmds+0x673/0xc40 ? brcmf_c_set_joinpref_default+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lock_acquire+0x19d/0x4e0 ? find_held_lock+0x2d/0x110 ? brcmf_usb_deq+0x1cc/0x260 ? mark_held_locks+0x9f/0xe0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? _raw_spin_unlock_irqrestore+0x47/0x50 ? trace_hardirqs_on+0x1c/0x120 ? brcmf_usb_deq+0x1a7/0x260 ? brcmf_usb_rx_fill_all+0x5a/0xf0 brcmf_attach+0x246/0xd40 ? wiphy_new_nm+0x1476/0x1d50 ? kmemdup+0x30/0x40 brcmf_usb_probe+0x12de/0x1690 ? brcmf_usbdev_qinit.constprop.0+0x470/0x470 usb_probe_interface+0x25f/0x710 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 ? usb_match_id.part.0+0x88/0xc0 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __mutex_unlock_slowpath+0xe7/0x660 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_set_configuration+0x984/0x1770 ? kernfs_create_link+0x175/0x230 usb_generic_driver_probe+0x69/0x90 usb_probe_device+0x9c/0x220 really_probe+0x1be/0xa90 __driver_probe_device+0x2ab/0x460 driver_probe_device+0x49/0x120 __device_attach_driver+0x18a/0x250 ? driver_allows_async_probing+0x120/0x120 bus_for_each_drv+0x123/0x1a0 ? bus_rescan_devices+0x20/0x20 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 ? trace_hardirqs_on+0x1c/0x120 __device_attach+0x207/0x330 ? device_bind_driver+0xb0/0xb0 ? kobject_uevent_env+0x230/0x12c0 bus_probe_device+0x1a2/0x260 device_add+0xa61/0x1ce0 ? __fw_devlink_link_to_suppliers+0x550/0x550 usb_new_device.cold+0x463/0xf66 ? hub_disconnect+0x400/0x400 ? _raw_spin_unlock_irq+0x24/0x30 hub_event+0x10d5/0x3330 ? hub_port_debounce+0x280/0x280 ? __lock_acquire+0x1671/0x5790 ? wq_calc_node_cpumask+0x170/0x2a0 ? lock_release+0x640/0x640 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? pr ---truncated---
CVSS Score
7.1
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: fix possible memory leak in solo_sysfs_init() If device_register() returns error in solo_sysfs_init(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup().
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_read_bh_nowait submit_bh dm_submit_bio do_worker process_deferred_bios commit metadata_operation_failed dm_pool_abort_metadata down_write(&pmd->root_lock) - LOCK B __destroy_persistent_data_objects dm_block_manager_destroy dm_bufio_client_destroy unregister_shrinker down_write(&shrinker_rwsem) thin_map | dm_thin_find_block ↓ down_read(&pmd->root_lock) --> ABBA deadlock , which triggers hung task: [ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds. [ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2 [ 76.978534] Workqueue: dm-thin do_worker [ 76.978552] Call Trace: [ 76.978564] __schedule+0x6ba/0x10f0 [ 76.978582] schedule+0x9d/0x1e0 [ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0 [ 76.978600] down_write+0xec/0x110 [ 76.978607] unregister_shrinker+0x2c/0xf0 [ 76.978616] dm_bufio_client_destroy+0x116/0x3d0 [ 76.978625] dm_block_manager_destroy+0x19/0x40 [ 76.978629] __destroy_persistent_data_objects+0x5e/0x70 [ 76.978636] dm_pool_abort_metadata+0x8e/0x100 [ 76.978643] metadata_operation_failed+0x86/0x110 [ 76.978649] commit+0x6a/0x230 [ 76.978655] do_worker+0xc6e/0xd90 [ 76.978702] process_one_work+0x269/0x630 [ 76.978714] worker_thread+0x266/0x630 [ 76.978730] kthread+0x151/0x1b0 [ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds. [ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459 [ 76.982128] Call Trace: [ 76.982139] __schedule+0x6ba/0x10f0 [ 76.982155] schedule+0x9d/0x1e0 [ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910 [ 76.982173] down_read+0x84/0x170 [ 76.982177] dm_thin_find_block+0x4c/0xd0 [ 76.982183] thin_map+0x201/0x3d0 [ 76.982188] __map_bio+0x5b/0x350 [ 76.982195] dm_submit_bio+0x2b6/0x930 [ 76.982202] __submit_bio+0x123/0x2d0 [ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0 [ 76.982222] submit_bio_noacct+0x389/0x770 [ 76.982227] submit_bio+0x50/0xc0 [ 76.982232] submit_bh_wbc+0x15e/0x230 [ 76.982238] submit_bh+0x14/0x20 [ 76.982241] ext4_read_bh_nowait+0xc5/0x130 [ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60 [ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0 [ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0 [ 76.982263] ext4_discard_preallocations+0x45d/0x830 [ 76.982274] ext4_clear_inode+0x48/0xf0 [ 76.982280] ext4_evict_inode+0xcf/0xc70 [ 76.982285] evict+0x119/0x2b0 [ 76.982290] dispose_list+0x43/0xa0 [ 76.982294] prune_icache_sb+0x64/0x90 [ 76.982298] super_cache_scan+0x155/0x210 [ 76.982303] do_shrink_slab+0x19e/0x4e0 [ 76.982310] shrink_slab+0x2bd/0x450 [ 76.982317] drop_slab+0xcc/0x1a0 [ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0 [ 76.982327] proc_sys_call_handler+0x1bc/0x300 [ 76.982331] proc_sys_write+0x17/0x20 [ 76.982334] vfs_write+0x3d3/0x570 [ 76.982342] ksys_write+0x73/0x160 [ 76.982347] __x64_sys_write+0x1e/0x30 [ 76.982352] do_syscall_64+0x35/0x80 [ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd Funct ---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: vme: Fix error not catched in fake_init() In fake_init(), __root_device_register() is possible to fail but it's ignored, which can cause unregistering vme_root fail when exit. general protection fault, probably for non-canonical address 0xdffffc000000008c KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467] RIP: 0010:root_device_unregister+0x26/0x60 Call Trace: <TASK> __x64_sys_delete_module+0x34f/0x540 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Return error when __root_device_register() fails.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: ARM: OMAP2+: omap4-common: Fix refcount leak bug In omap4_sram_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: media: si470x: Fix use-after-free in si470x_int_in_callback() syzbot reported use-after-free in si470x_int_in_callback() [1]. This indicates that urb->context, which contains struct si470x_device object, is freed when si470x_int_in_callback() is called. The cause of this issue is that si470x_int_in_callback() is called for freed urb. si470x_usb_driver_probe() calls si470x_start_usb(), which then calls usb_submit_urb() and si470x_start(). If si470x_start_usb() fails, si470x_usb_driver_probe() doesn't kill urb, but it just frees struct si470x_device object, as depicted below: si470x_usb_driver_probe() ... si470x_start_usb() ... usb_submit_urb() retval = si470x_start() return retval if (retval < 0) free struct si470x_device object, but don't kill urb This patch fixes this issue by killing urb when si470x_start_usb() fails and urb is submitted. If si470x_start_usb() fails and urb is not submitted, i.e. submitting usb fails, it just frees struct si470x_device object.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: r6040: Fix kmemleak in probe and remove There is a memory leaks reported by kmemleak: unreferenced object 0xffff888116111000 (size 2048): comm "modprobe", pid 817, jiffies 4294759745 (age 76.502s) hex dump (first 32 bytes): 00 c4 0a 04 81 88 ff ff 08 10 11 16 81 88 ff ff ................ 08 10 11 16 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff815bcd82>] kmalloc_trace+0x22/0x60 [<ffffffff827e20ee>] phy_device_create+0x4e/0x90 [<ffffffff827e6072>] get_phy_device+0xd2/0x220 [<ffffffff827e7844>] mdiobus_scan+0xa4/0x2e0 [<ffffffff827e8be2>] __mdiobus_register+0x482/0x8b0 [<ffffffffa01f5d24>] r6040_init_one+0x714/0xd2c [r6040] ... The problem occurs in probe process as follows: r6040_init_one: mdiobus_register mdiobus_scan <- alloc and register phy_device, the reference count of phy_device is 3 r6040_mii_probe phy_connect <- connect to the first phy_device, so the reference count of the first phy_device is 4, others are 3 register_netdev <- fault inject succeeded, goto error handling path // error handling path err_out_mdio_unregister: mdiobus_unregister(lp->mii_bus); err_out_mdio: mdiobus_free(lp->mii_bus); <- the reference count of the first phy_device is 1, it is not released and other phy_devices are released // similarly, the remove process also has the same problem The root cause is traced to the phy_device is not disconnected when removes one r6040 device in r6040_remove_one() or on error handling path after r6040_mii probed successfully. In r6040_mii_probe(), a net ethernet device is connected to the first PHY device of mii_bus, in order to notify the connected driver when the link status changes, which is the default behavior of the PHY infrastructure to handle everything. Therefore the phy_device should be disconnected when removes one r6040 device or on error handling path. Fix it by adding phy_disconnect() when removes one r6040 device or on error handling path after r6040_mii probed successfully.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: tipc: fix an information leak in tipc_topsrv_kern_subscr Use a 8-byte write to initialize sub.usr_handle in tipc_topsrv_kern_subscr(), otherwise four bytes remain uninitialized when issuing setsockopt(..., SOL_TIPC, ...). This resulted in an infoleak reported by KMSAN when the packet was received: ===================================================== BUG: KMSAN: kernel-infoleak in copyout+0xbc/0x100 lib/iov_iter.c:169 instrument_copy_to_user ./include/linux/instrumented.h:121 copyout+0xbc/0x100 lib/iov_iter.c:169 _copy_to_iter+0x5c0/0x20a0 lib/iov_iter.c:527 copy_to_iter ./include/linux/uio.h:176 simple_copy_to_iter+0x64/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x58/0x200 net/core/datagram.c:527 skb_copy_datagram_msg ./include/linux/skbuff.h:3903 packet_recvmsg+0x521/0x1e70 net/packet/af_packet.c:3469 ____sys_recvmsg+0x2c4/0x810 net/socket.c:? ___sys_recvmsg+0x217/0x840 net/socket.c:2743 __sys_recvmsg net/socket.c:2773 __do_sys_recvmsg net/socket.c:2783 __se_sys_recvmsg net/socket.c:2780 __x64_sys_recvmsg+0x364/0x540 net/socket.c:2780 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120 ... Uninit was stored to memory at: tipc_sub_subscribe+0x42d/0xb50 net/tipc/subscr.c:156 tipc_conn_rcv_sub+0x246/0x620 net/tipc/topsrv.c:375 tipc_topsrv_kern_subscr+0x2e8/0x400 net/tipc/topsrv.c:579 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 tipc_sk_join+0x2a8/0x770 net/tipc/socket.c:3084 tipc_setsockopt+0xae5/0xe40 net/tipc/socket.c:3201 __sys_setsockopt+0x87f/0xdc0 net/socket.c:2252 __do_sys_setsockopt net/socket.c:2263 __se_sys_setsockopt net/socket.c:2260 __x64_sys_setsockopt+0xe0/0x160 net/socket.c:2260 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd arch/x86/entry/entry_64.S:120 Local variable sub created at: tipc_topsrv_kern_subscr+0x57/0x400 net/tipc/topsrv.c:562 tipc_group_create+0x4e7/0x7d0 net/tipc/group.c:190 Bytes 84-87 of 88 are uninitialized Memory access of size 88 starts at ffff88801ed57cd0 Data copied to user address 0000000020000400 ... =====================================================
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07


Contact Us

Shodan ® - All rights reserved