Linux: >> Linux Kernel >> 2.0.26 Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: add intf release flow when usb disconnect
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-01-06
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free when COWing tree bock and tracing is enabled
When a COWing a tree block, at btrfs_cow_block(), and we have the
tracepoint trace_btrfs_cow_block() enabled and preemption is also enabled
(CONFIG_PREEMPT=y), we can trigger a use-after-free in the COWed extent
buffer while inside the tracepoint code. This is because in some paths
that call btrfs_cow_block(), such as btrfs_search_slot(), we are holding
the last reference on the extent buffer @buf so btrfs_force_cow_block()
drops the last reference on the @buf extent buffer when it calls
free_extent_buffer_stale(buf), which schedules the release of the extent
buffer with RCU. This means that if we are on a kernel with preemption,
the current task may be preempted before calling trace_btrfs_cow_block()
and the extent buffer already released by the time trace_btrfs_cow_block()
is called, resulting in a use-after-free.
Fix this by moving the trace_btrfs_cow_block() from btrfs_cow_block() to
btrfs_force_cow_block() before the COWed extent buffer is freed.
This also has a side effect of invoking the tracepoint in the tree defrag
code, at defrag.c:btrfs_realloc_node(), since btrfs_force_cow_block() is
called there, but this is fine and it was actually missing there.
CVSS Score
7.8
EPSS Score
0.0
Published
2025-01-06
In the Linux kernel, the following vulnerability has been resolved:
media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE
I expect that the hardware will have limited this to 16, but just in
case it hasn't, check for this corner case.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-01-02
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node().
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-28
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use after free on unload
System crash is observed with stack trace warning of use after
free. There are 2 signals to tell dpc_thread to terminate (UNLOADING
flag and kthread_stop).
On setting the UNLOADING flag when dpc_thread happens to run at the time
and sees the flag, this causes dpc_thread to exit and clean up
itself. When kthread_stop is called for final cleanup, this causes use
after free.
Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop
as the main signal to exit dpc_thread.
[596663.812935] kernel BUG at mm/slub.c:294!
[596663.812950] invalid opcode: 0000 [#1] SMP PTI
[596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1
[596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012
[596663.812974] RIP: 0010:__slab_free+0x17d/0x360
...
[596663.813008] Call Trace:
[596663.813022] ? __dentry_kill+0x121/0x170
[596663.813030] ? _cond_resched+0x15/0x30
[596663.813034] ? _cond_resched+0x15/0x30
[596663.813039] ? wait_for_completion+0x35/0x190
[596663.813048] ? try_to_wake_up+0x63/0x540
[596663.813055] free_task+0x5a/0x60
[596663.813061] kthread_stop+0xf3/0x100
[596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]
CVSS Score
5.5
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
af_packet: avoid erroring out after sock_init_data() in packet_create()
After sock_init_data() the allocated sk object is attached to the provided
sock object. On error, packet_create() frees the sk object leaving the
dangling pointer in the sock object on return. Some other code may try
to use this pointer and cause use-after-free.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds access in 'dcn21_link_encoder_create'
An issue was identified in the dcn21_link_encoder_create function where
an out-of-bounds access could occur when the hpd_source index was used
to reference the link_enc_hpd_regs array. This array has a fixed size
and the index was not being checked against the array's bounds before
accessing it.
This fix adds a conditional check to ensure that the hpd_source index is
within the valid range of the link_enc_hpd_regs array. If the index is
out of bounds, the function now returns NULL to prevent undefined
behavior.
References:
[ 65.920507] ------------[ cut here ]------------
[ 65.920510] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn21/dcn21_resource.c:1312:29
[ 65.920519] index 7 is out of range for type 'dcn10_link_enc_hpd_registers [5]'
[ 65.920523] CPU: 3 PID: 1178 Comm: modprobe Tainted: G OE 6.8.0-cleanershaderfeatureresetasdntipmi200nv2132 #13
[ 65.920525] Hardware name: AMD Majolica-RN/Majolica-RN, BIOS WMJ0429N_Weekly_20_04_2 04/29/2020
[ 65.920527] Call Trace:
[ 65.920529] <TASK>
[ 65.920532] dump_stack_lvl+0x48/0x70
[ 65.920541] dump_stack+0x10/0x20
[ 65.920543] __ubsan_handle_out_of_bounds+0xa2/0xe0
[ 65.920549] dcn21_link_encoder_create+0xd9/0x140 [amdgpu]
[ 65.921009] link_create+0x6d3/0xed0 [amdgpu]
[ 65.921355] create_links+0x18a/0x4e0 [amdgpu]
[ 65.921679] dc_create+0x360/0x720 [amdgpu]
[ 65.921999] ? dmi_matches+0xa0/0x220
[ 65.922004] amdgpu_dm_init+0x2b6/0x2c90 [amdgpu]
[ 65.922342] ? console_unlock+0x77/0x120
[ 65.922348] ? dev_printk_emit+0x86/0xb0
[ 65.922354] dm_hw_init+0x15/0x40 [amdgpu]
[ 65.922686] amdgpu_device_init+0x26a8/0x33a0 [amdgpu]
[ 65.922921] amdgpu_driver_load_kms+0x1b/0xa0 [amdgpu]
[ 65.923087] amdgpu_pci_probe+0x1b7/0x630 [amdgpu]
[ 65.923087] local_pci_probe+0x4b/0xb0
[ 65.923087] pci_device_probe+0xc8/0x280
[ 65.923087] really_probe+0x187/0x300
[ 65.923087] __driver_probe_device+0x85/0x130
[ 65.923087] driver_probe_device+0x24/0x110
[ 65.923087] __driver_attach+0xac/0x1d0
[ 65.923087] ? __pfx___driver_attach+0x10/0x10
[ 65.923087] bus_for_each_dev+0x7d/0xd0
[ 65.923087] driver_attach+0x1e/0x30
[ 65.923087] bus_add_driver+0xf2/0x200
[ 65.923087] driver_register+0x64/0x130
[ 65.923087] ? __pfx_amdgpu_init+0x10/0x10 [amdgpu]
[ 65.923087] __pci_register_driver+0x61/0x70
[ 65.923087] amdgpu_init+0x7d/0xff0 [amdgpu]
[ 65.923087] do_one_initcall+0x49/0x310
[ 65.923087] ? kmalloc_trace+0x136/0x360
[ 65.923087] do_init_module+0x6a/0x270
[ 65.923087] load_module+0x1fce/0x23a0
[ 65.923087] init_module_from_file+0x9c/0xe0
[ 65.923087] ? init_module_from_file+0x9c/0xe0
[ 65.923087] idempotent_init_module+0x179/0x230
[ 65.923087] __x64_sys_finit_module+0x5d/0xa0
[ 65.923087] do_syscall_64+0x76/0x120
[ 65.923087] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 65.923087] RIP: 0033:0x7f2d80f1e88d
[ 65.923087] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48
[ 65.923087] RSP: 002b:00007ffc7bc1aa78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 65.923087] RAX: ffffffffffffffda RBX: 0000564c9c1db130 RCX: 00007f2d80f1e88d
[ 65.923087] RDX: 0000000000000000 RSI: 0000564c9c1e5480 RDI: 000000000000000f
[ 65.923087] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000002
[ 65.923087] R10: 000000000000000f R11: 0000000000000246 R12: 0000564c9c1e5480
[ 65.923087] R13: 0000564c9c1db260 R14: 0000000000000000 R15: 0000564c9c1e54b0
[ 65.923087] </TASK>
[ 65.923927] ---[ end trace ]---
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
jfs: array-index-out-of-bounds fix in dtReadFirst
The value of stbl can be sometimes out of bounds due
to a bad filesystem. Added a check with appopriate return
of error code in that case.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: avoid NULL pointer error during sdio remove
When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio
workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON
is set to yes, kernel panic will happen:
Call trace:
destroy_workqueue+0x1c/0x258
ath10k_sdio_remove+0x84/0x94
sdio_bus_remove+0x50/0x16c
device_release_driver_internal+0x188/0x25c
device_driver_detach+0x20/0x2c
This is because during 'rmmod ath10k', ath10k_sdio_remove() will call
ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release()
will finally be called in ath10k_core_destroy(). This function will free
struct cfg80211_registered_device *rdev and all its members, including
wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio
workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON.
After device release, destroy_workqueue() will use NULL pointer then the
kernel panic happen.
Call trace:
ath10k_sdio_remove
->ath10k_core_unregister
……
->ath10k_core_stop
->ath10k_hif_stop
->ath10k_sdio_irq_disable
->ath10k_hif_power_down
->del_timer_sync(&ar_sdio->sleep_timer)
->ath10k_core_destroy
->ath10k_mac_destroy
->ieee80211_free_hw
->wiphy_free
……
->wiphy_dev_release
->destroy_workqueue
Need to call destroy_workqueue() before ath10k_core_destroy(), free
the work queue buffer first and then free pointer of work queue by
ath10k_core_destroy(). This order matches the error path order in
ath10k_sdio_probe().
No work will be queued on sdio workqueue between it is destroyed and
ath10k_core_destroy() is called. Based on the call_stack above, the
reason is:
Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and
ath10k_sdio_irq_disable() will queue work on sdio workqueue.
Sleep timer will be deleted before ath10k_core_destroy() in
ath10k_hif_power_down().
ath10k_sdio_irq_disable() only be called in ath10k_hif_stop().
ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif
bus, so ath10k_sdio_hif_tx_sg() won't be called anymore.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189
CVSS Score
5.5
EPSS Score
0.001
Published
2024-12-27
In the Linux kernel, the following vulnerability has been resolved:
net: inet6: do not leave a dangling sk pointer in inet6_create()
sock_init_data() attaches the allocated sk pointer to the provided sock
object. If inet6_create() fails later, the sk object is released, but the
sock object retains the dangling sk pointer, which may cause use-after-free
later.
Clear the sock sk pointer on error.
CVSS Score
7.8
EPSS Score
0.0
Published
2024-12-27