In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: zero-initialize GART table on allocation
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
(cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24)
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce: Prevent partial address patches
In the case that only one of lo/hi is valid, the patching could result
in a bad address written to in FW.
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add upper bound check for num_of_nodes
drm/amdkfd: Add upper bound check for num_of_nodes
in kfd_ioctl_get_process_apertures_new.
(cherry picked from commit 98ff46a5ea090c14d2cdb4f5b993b05d74f3949f)
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix fsck inconsistency caused by incorrect nat_entry flag usage
f2fs_need_dentry_mark() reads nat_entry flags without mutual exclusion
with the checkpoint path, which can result in an incorrect inode block
marking state. The scenario is as follows:
create & write & fsync 'file A' write checkpoint
- f2fs_do_sync_file // inline inode
- f2fs_write_inode // inode folio is dirty
- f2fs_write_checkpoint
- f2fs_flush_merged_writes
- f2fs_sync_node_pages
- f2fs_fsync_node_pages // no dirty node
- f2fs_need_inode_block_update // return true
- f2fs_fsync_node_pages // inode dirtied
- f2fs_need_dentry_mark //return true
- f2fs_flush_nat_entries
- f2fs_write_checkpoint end
- __write_node_folio // inode with DENT_BIT_SHIFT set
SPO, "fsck --dry-run" find inode has already checkpointed but still
with DENT_BIT_SHIFT set
The state observed by f2fs_need_dentry_mark() can differ from the state
observed in __write_node_folio() after acquiring sbi->node_write. The
root cause is that the semantics of IS_CHECKPOINTED and
HAS_FSYNCED_INODE are only guaranteed after the checkpoint write has
fully completed.
This patch moves set_dentry_mark() into __write_node_folio() and
protects it with the sbi->node_write lock.
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected role
Commit 0cb2af2ea66ad ("KVM: x86: Fix shadow paging use-after-free due
to unexpected GFN") fixed a shadow paging mismatch between stored and
computed GFNs; the bug could be triggered by changing a PDE mapping from
outside the guest, and then deleting a memslot. The rmap_remove()
call would miss entries created after the PDE change because the GFN
of the leaf SPTE does not match the GFN of the struct kvm_mmu_page.
A similar hole however remains if the modified PDE points to a non-leaf
page. In this case the gfn can be made to match, but the role does not
match: the original large 2MB page creates a kvm_mmu_page with direct=1,
while the new 4KB needs a kvm_mmu_page with direct=0. However,
kvm_mmu_get_child_sp() does not compare the role, and therefore reuses
the page.
The next step is installing a leaf (4KB) SPTE on the new path which
records an rmap entry under the gfn resolved by the walk. But when
that child is zapped its parent kvm_mmu_page has direct=1 and
kvm_mmu_page_get_gfn() computes the gfn for the 4KB page as
sp->gfn + index instead of using sp->shadowed_translation[] (or sp->gfns[]
in older kernels). It therefore fails to remove the recorded entry.
When the memslot is dropped the shadow page is freed but the rmap
entry survives, as in the scenario that was already fixed. Code that
later walks that gfn (dirty logging, MMU notifier invalidation, and
so on) dereferences an sptep that lies in the freed page, causing the
use-after-free.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops.
In the Linux kernel, the following vulnerability has been resolved:
slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.
One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.
[ 21.858578] ------------[ cut here ]------------
[ 21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[ 21.859251] Call trace:
[ 21.859255] __queue_work+0x5e0/0x790 (P)
[ 21.859265] queue_work_on+0x6c/0xf0
[ 21.859273] qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[ 21.859304] qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[ 21.859318] notifier_call_chain+0xa4/0x230
[ 21.859329] srcu_notifier_call_chain+0x64/0xb8
[ 21.859338] ssr_notify_start+0x40/0x78 [qcom_common]
[ 21.859355] rproc_start+0x130/0x230
[ 21.859367] rproc_boot+0x3d4/0x518
...
Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.
This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture.
In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Do not fill_pool() if pi_blocked_on
On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which
asserts if current::pi_blocked_on is set, because a task can obviously only
block on one lock as otherwise the priority inheritenace chain gets
corrupted.
Prevent this by expanding the conditional to take current::pi_blocked_on
into account.
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval()
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
(cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04)