Vulnerabilities
Vulnerable Software
Linux:  >> Linux Kernel  >> 4.19.305  Security Vulnerabilities
In the Linux kernel, the following vulnerability has been resolved: Input: exc3000 - properly stop timer on shutdown We need to stop the timer on driver unbind or probe failures, otherwise we get UAF/Oops.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix wrong ct->timeout value (struct nf_conn)->timeout is an interval before the conntrack confirmed. After confirmed, it becomes a timestamp. It is observed that timeout of an unconfirmed conntrack: - Set by calling ctnetlink_change_timeout(). As a result, `nfct_time_stamp` was wrongly added to `ct->timeout` twice. - Get by calling ctnetlink_dump_timeout(). As a result, `nfct_time_stamp` was wrongly subtracted. Call Trace: <TASK> dump_stack_lvl ctnetlink_dump_timeout __ctnetlink_glue_build ctnetlink_glue_build __nfqnl_enqueue_packet nf_queue nf_hook_slow ip_mc_output ? __pfx_ip_finish_output ip_send_skb ? __pfx_dst_output udp_send_skb udp_sendmsg ? __pfx_ip_generic_getfrag sock_sendmsg Separate the 2 cases in: - Setting `ct->timeout` in __nf_ct_set_timeout(). - Getting `ct->timeout` in ctnetlink_dump_timeout(). Pablo appends: Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is set on, otherwise conntrack creation via ctnetlink breaks. Note that the problem described in this patch occurs since the introduction of the nfnetlink_queue conntrack support, select a sufficiently old Fixes: tag for -stable kernel to pick up this fix.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq: fix integer overflow of "credit" if sch_fq is configured with "initial quantum" having values greater than INT_MAX, the first assignment of "credit" does signed integer overflow to a very negative value. In this situation, the syzkaller script provided by Cristoph triggers the CPU soft-lockup warning even with few sockets. It's not an infinite loop, but "credit" wasn't probably meant to be minus 2Gb for each new flow. Capping "initial quantum" to INT_MAX proved to fix the issue. v2: validation of "initial quantum" is done in fq_policy, instead of open coding in fq_change() _ suggested by Jakub Kicinski
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: drm/i915/gvt: fix vgpu debugfs clean in remove Check carefully on root debugfs available when destroying vgpu, e.g in remove case drm minor's debugfs root might already be destroyed, which led to kernel oops like below. Console: switching to colour dummy device 80x25 i915 0000:00:02.0: MDEV: Unregistering intel_vgpu_mdev b1338b2d-a709-4c23-b766-cc436c36cdf0: Removing from iommu group 14 BUG: kernel NULL pointer dereference, address: 0000000000000150 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 3 PID: 1046 Comm: driverctl Not tainted 6.1.0-rc2+ #6 Hardware name: HP HP ProDesk 600 G3 MT/829D, BIOS P02 Ver. 02.44 09/13/2022 RIP: 0010:__lock_acquire+0x5e2/0x1f90 Code: 87 ad 09 00 00 39 05 e1 1e cc 02 0f 82 f1 09 00 00 ba 01 00 00 00 48 83 c4 48 89 d0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 45 31 ff <48> 81 3f 60 9e c2 b6 45 0f 45 f8 83 fe 01 0f 87 55 fa ff ff 89 f0 RSP: 0018:ffff9f770274f948 EFLAGS: 00010046 RAX: 0000000000000003 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000150 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8895d1173300 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000150 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fc9b2ba0740(0000) GS:ffff889cdfcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000150 CR3: 000000010fd93005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire+0xbf/0x2b0 ? simple_recursive_removal+0xa5/0x2b0 ? lock_release+0x13d/0x2d0 down_write+0x2a/0xd0 ? simple_recursive_removal+0xa5/0x2b0 simple_recursive_removal+0xa5/0x2b0 ? start_creating.part.0+0x110/0x110 ? _raw_spin_unlock+0x29/0x40 debugfs_remove+0x40/0x60 intel_gvt_debugfs_remove_vgpu+0x15/0x30 [kvmgt] intel_gvt_destroy_vgpu+0x60/0x100 [kvmgt] intel_vgpu_release_dev+0xe/0x20 [kvmgt] device_release+0x30/0x80 kobject_put+0x79/0x1b0 device_release_driver_internal+0x1b8/0x230 bus_remove_device+0xec/0x160 device_del+0x189/0x400 ? up_write+0x9c/0x1b0 ? mdev_device_remove_common+0x60/0x60 [mdev] mdev_device_remove_common+0x22/0x60 [mdev] mdev_device_remove_cb+0x17/0x20 [mdev] device_for_each_child+0x56/0x80 mdev_unregister_parent+0x5a/0x81 [mdev] intel_gvt_clean_device+0x2d/0xe0 [kvmgt] intel_gvt_driver_remove+0x2e/0xb0 [i915] i915_driver_remove+0xac/0x100 [i915] i915_pci_remove+0x1a/0x30 [i915] pci_device_remove+0x31/0xa0 device_release_driver_internal+0x1b8/0x230 unbind_store+0xd8/0x100 kernfs_fop_write_iter+0x156/0x210 vfs_write+0x236/0x4a0 ksys_write+0x61/0xd0 do_syscall_64+0x55/0x80 ? find_held_lock+0x2b/0x80 ? lock_release+0x13d/0x2d0 ? up_read+0x17/0x20 ? lock_is_held_type+0xe3/0x140 ? asm_exc_page_fault+0x22/0x30 ? lockdep_hardirqs_on+0x7d/0x100 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fc9b2c9e0c4 Code: 15 71 7d 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 80 3d 3d 05 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffec29c81c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fc9b2c9e0c4 RDX: 000000000000000d RSI: 0000559f8b5f48a0 RDI: 0000000000000001 RBP: 0000559f8b5f48a0 R08: 0000559f8b5f3540 R09: 00007fc9b2d76d30 R10: 0000000000000000 R11: 0000000000000202 R12: 000000000000000d R13: 00007fc9b2d77780 R14: 000000000000000d R15: 00007fc9b2d72a00 </TASK> Modules linked in: sunrpc intel_rapl_msr intel_rapl_common intel_pmc_core_pltdrv intel_pmc_core intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ee1004 igbvf rapl vfat fat intel_cstate intel_uncore pktcdvd i2c_i801 pcspkr wmi_bmof i2c_smbus acpi_pad vfio_pci vfio_pci_core vfio_virqfd zram fuse dm ---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Grab sas_dev lock when traversing the members of sas_dev.list When freeing slots in function slot_complete_v3_hw(), it is possible that sas_dev.list is being traversed elsewhere, and it may trigger a NULL pointer exception, such as follows: ==>cq thread ==>scsi_eh_6 ==>scsi_error_handler() ==>sas_eh_handle_sas_errors() ==>sas_scsi_find_task() ==>lldd_abort_task() ==>slot_complete_v3_hw() ==>hisi_sas_abort_task() ==>hisi_sas_slot_task_free() ==>dereg_device_v3_hw() ==>list_del_init() ==>list_for_each_entry_safe() [ 7165.434918] sas: Enter sas_scsi_recover_host busy: 32 failed: 32 [ 7165.434926] sas: trying to find task 0x00000000769b5ba5 [ 7165.434927] sas: sas_scsi_find_task: aborting task 0x00000000769b5ba5 [ 7165.434940] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000769b5ba5) aborted [ 7165.434964] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000c9f7aa07) ignored [ 7165.434965] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000e2a1cf01) ignored [ 7165.434968] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 7165.434972] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000022d52d93) ignored [ 7165.434975] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000066a7516c) ignored [ 7165.434976] Mem abort info: [ 7165.434982] ESR = 0x96000004 [ 7165.434991] Exception class = DABT (current EL), IL = 32 bits [ 7165.434992] SET = 0, FnV = 0 [ 7165.434993] EA = 0, S1PTW = 0 [ 7165.434994] Data abort info: [ 7165.434994] ISV = 0, ISS = 0x00000004 [ 7165.434995] CM = 0, WnR = 0 [ 7165.434997] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f29543f2 [ 7165.434998] [0000000000000000] pgd=0000000000000000 [ 7165.435003] Internal error: Oops: 96000004 [#1] SMP [ 7165.439863] Process scsi_eh_6 (pid: 4109, stack limit = 0x00000000c43818d5) [ 7165.468862] pstate: 00c00009 (nzcv daif +PAN +UAO) [ 7165.473637] pc : dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.479443] lr : dereg_device_v3_hw+0x2c/0xa8 [hisi_sas_v3_hw] [ 7165.485247] sp : ffff00001d623bc0 [ 7165.488546] x29: ffff00001d623bc0 x28: ffffa027d03b9508 [ 7165.493835] x27: ffff80278ed50af0 x26: ffffa027dd31e0a8 [ 7165.499123] x25: ffffa027d9b27f88 x24: ffffa027d9b209f8 [ 7165.504411] x23: ffffa027c45b0d60 x22: ffff80278ec07c00 [ 7165.509700] x21: 0000000000000008 x20: ffffa027d9b209f8 [ 7165.514988] x19: ffffa027d9b27f88 x18: ffffffffffffffff [ 7165.520276] x17: 0000000000000000 x16: 0000000000000000 [ 7165.525564] x15: ffff0000091d9708 x14: ffff0000093b7dc8 [ 7165.530852] x13: ffff0000093b7a23 x12: 6e7265746e692067 [ 7165.536140] x11: 0000000000000000 x10: 0000000000000bb0 [ 7165.541429] x9 : ffff00001d6238f0 x8 : ffffa027d877af00 [ 7165.546718] x7 : ffffa027d6329600 x6 : ffff7e809f58ca00 [ 7165.552006] x5 : 0000000000001f8a x4 : 000000000000088e [ 7165.557295] x3 : ffffa027d9b27fa8 x2 : 0000000000000000 [ 7165.562583] x1 : 0000000000000000 x0 : 000000003000188e [ 7165.567872] Call trace: [ 7165.570309] dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.575775] hisi_sas_abort_task+0x248/0x358 [hisi_sas_main] [ 7165.581415] sas_eh_handle_sas_errors+0x258/0x8e0 [libsas] [ 7165.586876] sas_scsi_recover_host+0x134/0x458 [libsas] [ 7165.592082] scsi_error_handler+0xb4/0x488 [ 7165.596163] kthread+0x134/0x138 [ 7165.599380] ret_from_fork+0x10/0x18 [ 7165.602940] Code: d5033e9f b9000040 aa0103e2 eb03003f (f9400021) [ 7165.609004] kernel fault(0x1) notification starting on CPU 75 [ 7165.700728] ---[ end trace fc042cbbea224efc ]--- [ 7165.705326] Kernel panic - not syncing: Fatal exception To fix the issue, grab sas_dev lock when traversing the members of sas_dev.list in dereg_device_v3_hw() and hisi_sas_release_tasks() to avoid concurrency of adding and deleting member. When ---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: md: fix soft lockup in status_resync status_resync() will calculate 'curr_resync - recovery_active' to show user a progress bar like following: [============>........] resync = 61.4% 'curr_resync' and 'recovery_active' is updated in md_do_sync(), and status_resync() can read them concurrently, hence it's possible that 'curr_resync - recovery_active' can overflow to a huge number. In this case status_resync() will be stuck in the loop to print a large amount of '=', which will end up soft lockup. Fix the problem by setting 'resync' to MD_RESYNC_ACTIVE in this case, this way resync in progress will be reported to user.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: blk-mq: avoid double ->queue_rq() because of early timeout David Jeffery found one double ->queue_rq() issue, so far it can be triggered in VM use case because of long vmexit latency or preempt latency of vCPU pthread or long page fault in vCPU pthread, then block IO req could be timed out before queuing the request to hardware but after calling blk_mq_start_request() during ->queue_rq(), then timeout handler may handle it by requeue, then double ->queue_rq() is caused, and kernel panic. So far, it is driver's responsibility to cover the race between timeout and completion, so it seems supposed to be solved in driver in theory, given driver has enough knowledge. But it is really one common problem, lots of driver could have similar issue, and could be hard to fix all affected drivers, even it isn't easy for driver to handle the race. So David suggests this patch by draining in-progress ->queue_rq() for solving this issue.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: blk-mq: use quiesced elevator switch when reinitializing queues The hctx's run_work may be racing with the elevator switch when reinitializing hardware queues. The queue is merely frozen in this context, but that only prevents requests from allocating and doesn't stop the hctx work from running. The work may get an elevator pointer that's being torn down, and can result in use-after-free errors and kernel panics (example below). Use the quiesced elevator switch instead, and make the previous one static since it is now only used locally. nvme nvme0: resetting controller nvme nvme0: 32/0/0 default/read/poll queues BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 80000020c8861067 P4D 80000020c8861067 PUD 250f8c8067 PMD 0 Oops: 0000 [#1] SMP PTI Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:kyber_has_work+0x29/0x70 ... Call Trace: __blk_mq_do_dispatch_sched+0x83/0x2b0 __blk_mq_sched_dispatch_requests+0x12e/0x170 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x2b/0x50 process_one_work+0x1ef/0x380 worker_thread+0x2d/0x3e0
CVSS Score
7.8
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix memory leak on add_disk() failures When a gendisk is successfully initialized but add_disk() fails such as when a loop device has invalid number of minor device numbers specified, blkcg_init_disk() is called during init and then blkcg_exit_disk() during error handling. Unfortunately, iolatency gets initialized in the former but doesn't get cleaned up in the latter. This is because, in non-error cases, the cleanup is performed by del_gendisk() calling rq_qos_exit(), the assumption being that rq_qos policies, iolatency being one of them, can only be activated once the disk is fully registered and visible. That assumption is true for wbt and iocost, but not so for iolatency as it gets initialized before add_disk() is called. It is desirable to lazy-init rq_qos policies because they are optional features and add to hot path overhead once initialized - each IO has to walk all the registered rq_qos policies. So, we want to switch iolatency to lazy init too. However, that's a bigger change. As a fix for the immediate problem, let's just add an extra call to rq_qos_exit() in blkcg_exit_disk(). This is safe because duplicate calls to rq_qos_exit() become noop's.
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07
In the Linux kernel, the following vulnerability has been resolved: dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata Following concurrent processes: P1(drop cache) P2(kworker) drop_caches_sysctl_handler drop_slab shrink_slab down_read(&shrinker_rwsem) - LOCK A do_shrink_slab super_cache_scan prune_icache_sb dispose_list evict ext4_evict_inode ext4_clear_inode ext4_discard_preallocations ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_read_bh_nowait submit_bh dm_submit_bio do_worker process_deferred_bios commit metadata_operation_failed dm_pool_abort_metadata down_write(&pmd->root_lock) - LOCK B __destroy_persistent_data_objects dm_block_manager_destroy dm_bufio_client_destroy unregister_shrinker down_write(&shrinker_rwsem) thin_map | dm_thin_find_block ↓ down_read(&pmd->root_lock) --> ABBA deadlock , which triggers hung task: [ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds. [ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2 [ 76.978534] Workqueue: dm-thin do_worker [ 76.978552] Call Trace: [ 76.978564] __schedule+0x6ba/0x10f0 [ 76.978582] schedule+0x9d/0x1e0 [ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0 [ 76.978600] down_write+0xec/0x110 [ 76.978607] unregister_shrinker+0x2c/0xf0 [ 76.978616] dm_bufio_client_destroy+0x116/0x3d0 [ 76.978625] dm_block_manager_destroy+0x19/0x40 [ 76.978629] __destroy_persistent_data_objects+0x5e/0x70 [ 76.978636] dm_pool_abort_metadata+0x8e/0x100 [ 76.978643] metadata_operation_failed+0x86/0x110 [ 76.978649] commit+0x6a/0x230 [ 76.978655] do_worker+0xc6e/0xd90 [ 76.978702] process_one_work+0x269/0x630 [ 76.978714] worker_thread+0x266/0x630 [ 76.978730] kthread+0x151/0x1b0 [ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds. [ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910 [ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459 [ 76.982128] Call Trace: [ 76.982139] __schedule+0x6ba/0x10f0 [ 76.982155] schedule+0x9d/0x1e0 [ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910 [ 76.982173] down_read+0x84/0x170 [ 76.982177] dm_thin_find_block+0x4c/0xd0 [ 76.982183] thin_map+0x201/0x3d0 [ 76.982188] __map_bio+0x5b/0x350 [ 76.982195] dm_submit_bio+0x2b6/0x930 [ 76.982202] __submit_bio+0x123/0x2d0 [ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0 [ 76.982222] submit_bio_noacct+0x389/0x770 [ 76.982227] submit_bio+0x50/0xc0 [ 76.982232] submit_bh_wbc+0x15e/0x230 [ 76.982238] submit_bh+0x14/0x20 [ 76.982241] ext4_read_bh_nowait+0xc5/0x130 [ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60 [ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0 [ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0 [ 76.982263] ext4_discard_preallocations+0x45d/0x830 [ 76.982274] ext4_clear_inode+0x48/0xf0 [ 76.982280] ext4_evict_inode+0xcf/0xc70 [ 76.982285] evict+0x119/0x2b0 [ 76.982290] dispose_list+0x43/0xa0 [ 76.982294] prune_icache_sb+0x64/0x90 [ 76.982298] super_cache_scan+0x155/0x210 [ 76.982303] do_shrink_slab+0x19e/0x4e0 [ 76.982310] shrink_slab+0x2bd/0x450 [ 76.982317] drop_slab+0xcc/0x1a0 [ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0 [ 76.982327] proc_sys_call_handler+0x1bc/0x300 [ 76.982331] proc_sys_write+0x17/0x20 [ 76.982334] vfs_write+0x3d3/0x570 [ 76.982342] ksys_write+0x73/0x160 [ 76.982347] __x64_sys_write+0x1e/0x30 [ 76.982352] do_syscall_64+0x35/0x80 [ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd Funct ---truncated---
CVSS Score
5.5
EPSS Score
0.0
Published
2025-10-07


Contact Us

Shodan ® - All rights reserved