In the Linux kernel, the following vulnerability has been resolved:
nilfs2: Fix potential block overflow that cause system hang
When a user executes the FITRIM command, an underflow can occur when
calculating nblocks if end_block is too small. Since nblocks is of
type sector_t, which is u64, a negative nblocks value will become a
very large positive integer. This ultimately leads to the block layer
function __blkdev_issue_discard() taking an excessively long time to
process the bio chain, and the ns_segctor_sem lock remains held for a
long period. This prevents other tasks from acquiring the ns_segctor_sem
lock, resulting in the hang reported by syzbot in [1].
If the ending block is too small, typically if it is smaller than 4KiB
range, depending on the usage of the segment 0, it may be possible to
attempt a discard request beyond the device size causing the hang.
Exiting successfully and assign the discarded size (0 in this case)
to range->len.
Although the start and len values in the user input range are too small,
a conservative strategy is adopted here to safely ignore them, which is
equivalent to a no-op; it will not perform any trimming and will not
throw an error.
[1]
task:segctord state:D stack:28968 pid:6093 tgid:6093 ppid:2 task_flags:0x200040 flags:0x00080000
Call Trace:
rwbase_write_lock+0x3dd/0x750 kernel/locking/rwbase_rt.c:272
nilfs_transaction_lock+0x253/0x4c0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2569 [inline]
nilfs_segctor_thread+0x6ec/0xe00 fs/nilfs2/segment.c:2684
[ryusuke: corrected part of the commit message about the consequences]
In the Linux kernel, the following vulnerability has been resolved:
bonding: annotate data-races around slave->last_rx
slave->last_rx and slave->target_last_arp_rx[...] can be read and written
locklessly. Add READ_ONCE() and WRITE_ONCE() annotations.
syzbot reported:
BUG: KCSAN: data-race in bond_rcv_validate / bond_rcv_validate
write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 1:
bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335
bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533
__netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039
__netif_receive_skb_one_core net/core/dev.c:6150 [inline]
__netif_receive_skb+0x59/0x270 net/core/dev.c:6265
netif_receive_skb_internal net/core/dev.c:6351 [inline]
netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410
...
write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 0:
bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335
bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533
__netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039
__netif_receive_skb_one_core net/core/dev.c:6150 [inline]
__netif_receive_skb+0x59/0x270 net/core/dev.c:6265
netif_receive_skb_internal net/core/dev.c:6351 [inline]
netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410
br_netif_receive_skb net/bridge/br_input.c:30 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
...
value changed: 0x0000000100005365 -> 0x0000000100005366
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
In iscsit_dec_conn_usage_count(), the function calls complete() while
holding the conn->conn_usage_lock. As soon as complete() is invoked, the
waiter (such as iscsit_close_connection()) may wake up and proceed to free
the iscsit_conn structure.
If the waiter frees the memory before the current thread reaches
spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function
attempts to release a lock within the already-freed connection structure.
Fix this by releasing the spinlock before calling complete().
In the Linux kernel, the following vulnerability has been resolved:
md: suspend array while updating raid_disks via sysfs
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too.
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't WARN for connections on invalid channels
It's not clear (to me) how exactly syzbot managed to hit this,
but it seems conceivable that e.g. regulatory changed and has
disabled a channel between scanning (channel is checked to be
usable by cfg80211_get_ies_channel_number) and connecting on
the channel later.
With one scenario that isn't covered elsewhere described above,
the warning isn't good, replace it with a (more informative)
error message.
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: use skb_header_pointer_careful()
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation.
In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Fix racy access at PCM trigger
The PCM trigger callback of aloop driver tries to check the PCM state
and stop the stream of the tied substream in the corresponding cable.
Since both check and stop operations are performed outside the cable
lock, this may result in UAF when a program attempts to trigger
frequently while opening/closing the tied stream, as spotted by
fuzzers.
For addressing the UAF, this patch changes two things:
- It covers the most of code in loopback_check_format() with
cable->lock spinlock, and add the proper NULL checks. This avoids
already some racy accesses.
- In addition, now we try to check the state of the capture PCM stream
that may be stopped in this function, which was the major pain point
leading to UAF.
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: Fix race condition in mmp_pdma_residue()
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock.
In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: ensure skb headroom before skb_push
This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is
less than needed (typically 110 - 94 = 16 bytes).